Professional Documents
Culture Documents
Catalogo Moyano
Catalogo Moyano
0 1 2 3 4
Front Cover Introduction Summary Channels & Frequencies Circular Polarization Tuned
6 7
AM-Helias AM-Ciclon AM-Siren AM-TQ AM-TQ2 AM-TQ3 AM-4DC AM- Yinx- FM AM-FMPL AM-FMPL2 AM-FMPL 5 Kw AM-FMPL-2Y 5Kw AM FMPL-3Y 5Kw AM-GM AM-GM2Y AM-GM3Y AM-2DV BII AM-BIIP2DD-ST AM-BIIP2DD-TT
FM Radio
Vertical Polarization
10 11 12 13 14 15 16
17
18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
Vertical Polarization High Power Panel Vertical Polarization High Power Panel Vertical Polarization High Power Panel Radio FM Splitters Radio FM Filters Radio FM Combiners DAB Omni DAB Omni DIPOLE ARRAY DAB SECTO FOLDED DIPOLES DAB Panel 2 dipoles DAB Panel 4 dipoles DAB Yagi DAB Splitters DAB Filters DAB Combiners AM-BI Panel Splitters BI BIII Panel 2 Dipoles BIII Panel 4 Dipoles BIII Panel 2 Folded Dipoles BIII yagi Splitters BIII Filters BIII Combiners BIII AM-BIV/V 4 D Panel CI AM-BIV/V 4 D Panel AM-YINX-N UHF Splitters UHF Filters UHF Star-point Combiner UHF Directional uhf combiner AM-DVB Panel Splitters DVB Filters DVB Combiner DVB Accessories
DAB
TV B I TV BIII
UHF BIV/V TV
AM-CS4 AM-CD4 DVB AM-CDV Rigid Line Adapters Coaxial Connectors Directional Couplers
Accesories
34
Address
# / Lines 405 625 625 625 819 819 625 625 625 625 625 625 525 625 varies varies
Vision Modulation Pos. Neg. Pos. Neg. Neg. Pos. Neg. Neg. Neg. Neg. Neg. Pos. Neg. Neg. Pos. Neg.
Sound Modulation . FM FM FM . . FM FM FM FM FM AM FM FM FM FM
In Use? No Yes Yes Yes No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Asian countries and Australia Color VHF PAL B PAL & SECAM (H) B PAL B PAL B SECAM D PAL D SECAM(V) B PAL B PAL B SECAM(H) B NTSC M PAL B PAL B NTSC M PAL B PAL B NTSC M PAL B NTSC M
RADIO FM Banda II
Tuned
Special balun to minimize tower influences. Easy tube instalation in array configuration Depth Width Height Weight Mounting Wind Speed Materials 1300 mm 400 mm 600 mm 8 Kg To suit pole 60 mm 160 Km/h Feeding lines galvanized steel Helix in copper, teflon isolators
AM - CICLON
Technical Specification Frequency 87.5 - 108 MHz Tuned Polarization Circular Azimuthal Pattern Omni +/- 2dB ex-tower influence Axial Ratio +/-3 dB free space Gain 2.15 dBi VSWR < 1.1 : 1 150 KHz Impedance 50 Power Handling 600 w Connectors N(F) Lightning Protection DC Grounded
Factory tuned upon request. Specially suited for individual use or stacked medium power systems Depth Width Height Weight Mounting Wind Speed Materials 1230 mm 305 mm 700 mm 3.8 Kg To suit pole 25 - 70 mm 160 Km/h Stainless steel, plated brass and PVC
AM - SIREN
Technical Specification Frequency 87.5 - 108 MHz Tuned Polarization Circular Azimuthal Pattern Omni +/- 2dB ex-tower influence Axial Ratio +/-3 dB free space Gain 2.15 dBi VSWR < 1.1 : 1 200 KHz Impedance 50 Power Handling 4 Kw Connectors EIA 7/8" Lightning Protection DC Grounded
Factory tuned upon request. Specially suited for individual use or stacked medium power systems Depth Width Height Weight Mounting Wind Speed Materials 1300 mm 325 mm 800 mm 4.8 Kg To suit pole 25 - 70 mm 160 Km/h Stainless steel, silver-plated brass and PVC Radomized connector for ice protection
AM-Ciclon BAYS 2 4 6 8 12 GAIN 5 dBi 8 dBi 10 dBi 11 dBi 13 dBi LENGTH 2.5 m 7.5 m 12.5 m 17.5 m 27.5 m POWER (Kw) 0.6 2.4 3.6 4.8 7.2 INPUT SPLITTER N(H) DIN 7/16 POWER (Kw) 8 10 12 12 30
AM-Siren INPUT SPLITTER EIA 1 5/8 EIA 1 5/8 EIA 1 5/8 EIA 1 5/8 EIA 3 1/8
AM-Helias POWER (Kw) 4 8 12 16 24 INPUT SPLITTER EIA 1 5/8 EIA 1 5/8 EIA 1 5/8 EIA 3 1/8 EIA 3 1/8
RADIO FM Banda II
Circular AM - TQ
Polarization
Broadband
Individual fed, enabling polarization control and possibility of using each conector in separate transmiters Depth Width Height Weight Mounting Wind Speed Materials 902 mm 1301 mm 1301 mm 28 Kg To suit pole 60 or 101 mm 30 Kg front @ 160 Km/h Aluminum dipoles. Feeding lines in copper, Teflon isolators, Inclemency radome against enviroment adverse
Technical Specification Frequency 87.5 - 108 MHz Polarization Circular Azimuthal Pattern Omni 1.5dB Axial Ratio 3 dB in 240 Gain 2.15 dBi VSWR < 1.3 : 1 Broadband Impedance Power Handling Connectors Lightning Protection 50 2 x 2,5 Kw or 2x5 Kw 2 X DIN 7/16 or 2x13/30 DC Grounded
TQ BAYS 2 4 6 8 GAIN (dBd) 1mt tower ( each polarization) 1.7 4.7 6.5 7.7 4,4 m 10 15 20.6 LENGTH POWER (Kw) 10 20 30 40 INPUT SPLITTER EIA 1 5/8 EIA 3 1/8 EIA 3 1/8 EIA 4 1/8
AM - TQ2
Technical Specification Frequency Polarization H Beamwidth V Beamwidth Gain VSWR Impedance Power Handling Connectors Lightning Protection Front to Back Ratio 87.5 - 108 MHz Circular 110 75 6.6 dBi < 1.2 : 1 Broadband 50 2 x 2,5 Kw or 2x 5 kw 2 X DIN 7/16 or 2x 13/30 DC Grounded > 12 dB
Ideal for several faces mounting in triangular or square towers. Depth Width Height Weight Mounting Wind Load Materials 1002 1702 1702 57 mm mm mm Kg
To suit pole 60 or 101 mm 90 Kg Front @ 160 Km/h Aluminum dipoles. Feeding lines in copper, Teflon isolators, Inclemency radome against enviroment adverse
AM - TQ3
Technical Specification Frequency Polarization H Beamwidth V Beamwidth Gain VSWR Impedance Power Handling Connectors Lightning Protection Front to Back Ratio 87.5 - 108 MHz Circular 100 70 7.5 dBi < 1.15 : 1 Broadband 50 2 x 2,5 Kw or 2x 5 kw 2 X DIN 7/16 or 2x 13/30 DC Grounded > 15 dB T Q2 BAYS FACES 2 3 2 3 2 3 GAIN (dBd) (each polarization) 0.8 -1 3.8 2 5.5 3.7 POWER (Kw) 10 15 20 30 30 45
High Gain. Ideal for several faces mounting in triangular or square towers. Depth Width Height Weight Mounting Wind Load Materials 1302 1702 1702 65 mm mm mm Kg
To suit pole 60 or 101 mm 95 Kg Front @ 160 Km/h Aluminum dipoles. Feeding lines in copper, Teflon isolators, Inclemency radome against enviroment adverse
T Q3 ( each polarization) GAIN ( dBd) / POWER FACES BAYS 1 2 4 6 8 5.3 8.3 10.2 11.3 1 5 Kw each bay 2 10 Kw each bay 1,7 4,7 7,7 9,5 10,7 3 0,2 3,2 6,2 8.0 9.3 4 -1,1 1,8 4,8 6,7 7,8 LENGTH (Mts) 1,7 4 8,6 13,2 18 15 Kw each bay 20 Kw each bay
1 2 3
RADIO FM Banda II
Circular
Polarization
AM - 4DC
Technical Specification Frequency 87.5 - 108 MHz Polarization Circular H Beamwidth 70 V Beamwidth 60 Gain 9,5 dBi VSWR < 1.1 : 1 Broadband Impedance 50 Power Handling & Conectors DC1 2 X DIN 7/16 DC2 2 X DIN 13/30 DC3 1 X EIA 1 5/8" Lightning Protection DC Grounded Front to Back Ratio > 18 dB
High Power:10 Kw per panel. Ideal for stacking for any radiation pattern Depth Width Height Weight Mounting Wind Load Materials 2 x 2,5 Kw 2 x 5 Kw 10 Kw 900 mm 2316 mm 2316 mm 140 Kg To suit pole 114 mm 210 Kg Front @ 150 Km/h 30 Kg Side @ 150 Km/h Hot dip galvanized dipoles. Feeding lines in copper, Teflon isolators, hot dip galvanized reflector grid.
AM-4DC Panel BAYS FACES 2 1 3 4 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4 GAIN (dBd) (each polarization) 1.5 0.1 -1.2 7.3 4.5 3.3 1.8 10.3 7.5 6.3 4.8 12.1 9.3 8.1 6.6 13.3 10.5 9.3 7.8 WEIGHT (Kgs) 280 420 560 280 560 840 1120 560 1120 1680 2240 840 1680 2520 3360 1120 2240 3360 4480 23.7 17.6 11.5 5.3 2.3 LENGHT (Mts)
RADIO FM Banda II
YAGI - FM AM- YINOX - FM Technical Specification Frequency Polarization Gain VSWR Impedance Power Handling Connectors Lightning Protection Front to Back Ratio Connectors Lightning Protection Yagi FM. Several Gains. Light and strong design. 87.5 - 108 MHz Linear (Vert. or Hor.) From 5 to 12 dBi < 1.5 : 1 Broadband 50 (or 75 upon request) 100 w N (F) DC Grounded >16dB N (F) DC Grounded Weight Mounting Wind Speed Materials Temperature 10 Kg To suit pole 50 to 60 mm 200 Km/h Stainless steel and teflon -40C to +50C
TYPE AM-YINOX-FM2 AM-YINOX-FM3 AM-YINOX-FM4 AM-YINOX-FM5 AM-YINOX-FM6 AM-YINOX-FM7 WIDE BAND DIPOLE
AM-YINOX-FM BEAMWIDTH E () 75 65 60 52 45 38
AM - FM-PL Technical Specification Frequency Polarization H Beamwidth V Beamwidth Gain VSWR Impedance Power Handling Connectors Lightning Protection
Specially suited for individual use or stacked medium power Systems. Gamma match adaptation 87.5 - 108 MHz Vertical Omni ex-tower influence 80 2.15 dBi < 1.3 : 1 Broadband 50 2 Kw DIN 7/16 DC Grounded Depth Width Height Weight Mounting Wind Load Materials 857 120 1352 9 To suit pole 60 mm 12 Kg @ 160 Km/h Fully Stainless Steel, silver-plated brass copper-berylium and PTFE mm mm mm Kg
AM - FM-PL-2Y Technical Specification Frequency Polarization H Beamwidth V Beamwidth Gain VSWR Impedance Power Handling Connectors Lightning Protection
Specially suited for individual use or stacked medium power Systems. Gamma match adaptation 87.5 - 108 MHz Vertical 180 80 5,15 dBi < 1.3 : 1 Broadband 50 2 Kw DIN 7/16 DC Grounded Depth Width Height Weight Mounting Wind Load Materials 857 mm 120 mm 1734 mm 11 Kg To suit pole 60 mm 25 Kg @ 160 Km/h Fully Stainless Steel, silver-plated brass copper-berylium an PTFE
FM-PL BAYS 2 4 6 8 10 VERTICAL BEAMWIDTH 36 17 11 9 7 JUMPERS CABLE LENGTH 3m 9m 15 m 21 m 27 m POWER (Kw) 4 8 12 16 20 GAIN (dBi) 5 8 10 11 12 INPUT SPLITTER 1 5/8 1 5/8 1 5/8 3 1/8" 3 1/8"
FM-PL-2Y GAIN (dBi) 8 11 13 14 15 INPUT SPLITTER 1 5/8 1 5/8 1 5/8 3 1/8" 3 1/8"
RADIO FM Banda II
AM - FMPL-2Y 5 KW
Technical Specification Frequency 87.5 - 108 MHz Polarization Vertical H Beamwidth 220 V Beamwidth 67 Gain 5,15 dBi VSWR < 1.3 : 1 Broadband Impedance 50 Power Handling & Conectors EIA 7/8" Lightning Protection DC Grounded 5 Kw
Wide Band. Excellent radiant pattern. Outdoor radome against environment adverse 1302 mm 85 mm 1750 mm 16 Kg 26 Kg @ 160 Km/h Dipole and reflector in Stainless Steel Teflon isolators, Silver plated internal line Poliester radome with fiber glass Silicon O-ring Radome Colour White Mounting To suit pole 50 mm to 100 mm Depth Width Height Weight Wind Load Materials
AM - FMPL-3Y 5KW
Technical Specification Frequency 87.5 - 108 MHz Polarization Vertical H Beamwidth 150 V Beamwidth 70 Gain 7 dBi VSWR < 1.3 : 1 Broadband Impedance 50 Power Handling & Conectors DIN 7/16 2,5 Kw EIA 7/8" 5 Kw Lightning Protection DC Grounded
Wide Band. Excellent beaming pattern. Also Omnidirectional an super-directive versions Depth Width Height Weight Wind Load Materials 1320 mm 85 mm 1750 mm 10 Kg 44 Kg @ 160 Km/h Dipole and elements in Stainless Steel Teflon isolators, Silver plated internal line Silicon O-ring To suit pole 50 mm to 100 mm GAIN (dBd)
Mounting
BAYS 2 4 6 8 10
POWER (Kw) 10 20 30 40 50
BEAMWIDTH H 36 17 11 8 7
AM FMPL 3 6 7.8 9 10
AM FMPL 2Y 6 9 10.8 12 13
AM FMPL 3Y 8 11 13 14 15
RADIO FM Banda II
Radome Colour
AM - GM-2YS
Technical Specification Frequency 87.5 - 108 MHz Polarization Vertical H Beamwidth 220 V Beamwidth 67 Gain 5,15 dBi VSWR < 1.3 : 1 Broadband Impedance 50 Power Handling & Conectors DIN 7/16 2,5 Kw EIA 7/8" 4 Kw DIN 13/30 5 Kw Lightning Protection DC Grounded Front to Back Ratio > 6 dB
Also Omnidirectional and super-directive versions Depth Width Height Weight Wind Load Materials 1000 mm 333 mm 2090 mm 28.5 Kg 42 Kg @ 160 Km/h Aluminum dipoles. Feeding lines in copper, Teflon isolators, Inclemency radome against enviroment adverse
AM - GM-3YS
Technical Specification Frequency 87.5 - 108 MHz Polarization Vertical H Beamwidth 150 V Beamwidth 70 Gain 5,5 dBi VSWR < 1.3 : 1 Broadband Impedance 50 Power Handling & Conectors DIN 7/16 2,5 Kw EIA 7/8" 4 Kw DIN 13/30 Lightning Protection Front to Back Ratio DC Grounded > 12 dB 5 Kw
Wide Band. Excellent beaming pattern. Also Omnidirectional an super-directive versions Depth Width Height Weight Wind Load Materials 1320 mm 333 mm 2090 mm 30.5 Kg 55 Kg @ 160 Km/h Aluminum dipoles. Feeding lines in copper, Teflon isolators, Inclemency radome against enviroment adverse Red To suit pole 60 mm
GAIN (dBd) BAYS 2 4 6 8 10 POWER (Kw) 5 10 15 20 25 BEAMWIDTH H 36 17 11 8 7 LENGTH (Mts) 4.2 9.2 15 21.3 27 GM 5 8 10 11 12 GM2Y 8 11 13 14 15 GM3Y 8.5 11.5 13.5 14.5 15.5
RADIO FM Banda II
HIGH GAIN
High Power:10 Kw per panel. Ideal for stacking for any radiation pattern Depth Width height Weight Mounting Wind Load Materials 970 mm 2290 mm 2480 mm 130 Kg To suit pole 113 mm 147 Kg @ 160 Km/h Hot dip galvanized dipoles. Feeding lines in copper, Teflon isolators, hot dip galvanized reflector grid.
AM-2DV Panel BAYS FACES 2 1 3 4 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4 GAIN (dBd) 4.7 3 1.7 10.7 7.7 6 4.6 13.7 10.7 9 7.6 15.5 12.5 10.8 9.4 16.7 13.7 12 10.6 WEIGHT (Kgs) 260 390 520 260 520 780 1040 520 1040 1560 2080 780 1560 2340 3120 1040 2080 3120 4160 21.4 16 10.6 4.6 LENGHT (Mts) 2.29
RADIO FM Banda II
AM-BIIP2DD-ST BAYS FACES 2 1 3 4 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4 GAIN (dBd) 4.3 2.6 0.2 10.3 7.3 5.6 3.2 13.3 10.3 8.6 6.2 15.1 12.1 10.4 8 16.3 13.3 11.6 9.2 WEIGHT ALUMINUM (Kgs) 72 108 144 72 144 216 288 144 288 432 576 216 432 648 864 288 576 864 1152 23.3 17.3 11.3 5.3 LENGHT (Mts) 2.3
RADIO FM Banda II
AM-BIIP2DD-TT BAYS FACES 2 3 1 2 2 3 1 4 2 3 1 6 2 3 1 8 2 3 GAIN (dBd) 3.8 2.1 9.8 6.8 5.1 12.8 9.8 8.1 14.6 11.6 9.9 15.8 12.8 11.1 WEIGHT ALUMINUM (Kgs) 64 96 64 128 192 128 256 384 192 384 576 256 512 768 23.5 17.5 11.5 5.5 LENGHT (Mts) 2.5
RADIO FM Banda II
Typical Length
AM-S2
AM-S211x AM-S222x AM-S232x AM-S242x AM-S244x AM-S252x AM-S253x AM-S254x AM-S255x AM-S272x AM-S273x AM-S274x AM-S275x AM-S277x AM-S284x AM-S285x AM-S286x AM-S287x AM-S297x AM-S207x AM-S208x
Input connector code type N(F) DIN 7/16 (F) EIA 7/8" DIN 13/30 (F) code 1 2 3 4 4 5 EIA 1 5/8" 5 5 5 7 7 EIA 3 1/8" 7 7 7 8 8 8 8 9 0 10
Output connector code type N(F) DIN 7/16 DIN 7/16 DIN 7/16 DIN 13/30 DIN 7/16 EIA 7/8" DIN 13/30 EIA 1 5/8" DIN 7/16 EIA 7/8" DIN 13/30 EIA 1 5/8" EIA 3 1/8" DIN 13/30 EIA 1 5/8" DIN 29/66 EIA 3 1/8" EIA 3 1/8" EIA 4 1/2" EIA 6 1/8" code 1 2 2 2 4 2 3 4 5 2 3 4 5 7 4 5 6 7 7 9 0 x x x x x x x x x x x x x x x x x x 2 x x 3 x x 4 x x x x
Way number 5 6 x x x x x x x x x x x x x x x x x x x x x x 8 10 12
x x x x x x x x x x
RADIO FM Banda II
AM-F2
Power code code / cavities 3 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 Insertion Loss (dB) < 0.7 dB <0.3 dB <0.5 dB <0.7 dB <0.3 dB < 0.4 dB < 0.7 dB < 0.2 dB < 0.3 dB < 0.7 dB <0.1 dB <0.2 dB <0.6 dB <0.1 dB <0.2 dB < 0.6 dB Atenuation (dB) fo +/- 2MHz > 35 dB > 18 dB > 32 dB > 45 dB > 22 dB > 37 dB > 55 dB > 24 dB > 42 dB > 60 dB > 25 dB > 45 dB > 60 dB > 25 dB > 45 dB > 60 dB fo +/- 6 MHz > 60 dB > 38 dB > 60 dB > 80 dB > 40 dB > 60 dB > 80 dB > 40 dB > 65 dB > 80 dB > 40 dB > 65 dB > 80 dB > 40 dB > 65 dB > 80 dB Dimensions (mm) Length 301 329 477 625 401 601 801 675 999 1322 983 1428 1876 1339 1971 2603 Heigth 400 924 924 924 950 950 950 1050 1050 1050 1050 1050 1050 1050 1050 1050 Width 100 180 180 180 200 200 200 350 350 350 495 495 495 686 686 686 Weight (Kg) 10 8 12 16 10 15 20 20 30 40 40 60 80 55 83 110
Power AM-F2003 AM-F2012 AM-F2013 AM-F2014 AM-F2022 AM-F2023 AM-F2024 AM-F2052 AM-F2053 AM-F2054 AM-F2102 AM-F2103 AM-F2104 AM-F2202 AM-F2203 AM-F2204 20 Kw 10 Kw 5 Kw 2 Kw 1 Kw 300 W
code 00 01 01 01 02 02 02 05 05 05 10 10 10 20 20 20
Connectors N(F) DIN 7/16 DIN 7/16 DIN 7/16 DIN 7/16 DIN 7/16 DIN 7/16 EIA 1 5/8" EIA 1 5/8" EIA 1 5/8" EIA 1 5/8" EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" EIA 3 1/8" EIA 3 1/8"
Other Input/Output connector uppon request Higher than 20 Kw, contact factory
RADIO FM Banda II
AM-CS2
Insertion Loss
AM-SC2003x AM-SC2012x AM-SC2013x AM-SC2014x AM-SC2022x AM-SC2023x AM-SC2024x AM-SC2052x AM-SC2053x AM-SC2054x AM-SC2102x AM-SC2103x AM-SC2104x AM-SC2202x AM-SC2203x AM-CS2204x * isolation 30 dB
300 W
< 0.9 dB < 0.4 dB < 0.6 dB < 0.8 dB < 0.3 dB < 0.5 dB < 0.7 dB < 0.2 dB < 0.4 dB < 0.7 dB < 0.1 dB < 0.2 dB < 0.6 dB < 0.1 dB < 0.2 dB < 0.6 dB
DIN 7/16 DIN 7/16 DIN 7/16 DIN 7/16 DIN 7/16 DIN 7/16 EIA 1 5/8" EIA 1 5/8" EIA 1 5/8" EIA 1 5/8" EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" EIA 3 1/8" EIA 3 1/8"
AM-DC2
Insertion Loss in Narrow Band <0.7 dB < 0.3 dB < 0.5 dB < 0.7 dB < 0.3 dB < 0.5 dB < 0.7 dB < 0.2 dB < 0.3 dB < 0.7 dB < 0.1 dB < 0.2 dB < 0.6 dB < 0.1 dB < 0.2 dB < 0.6 dB < 0.4 dB
AM-DC2003x AM-DC2012x AM-CD2013x AM-DC2014x AM-DC2022x AM-DC2023x AM-DC2024x AM-DC2052x AM-DC2053x AM-DC2054x AM-DC2102x AM-DC2103x AM-DC2104x AM-DC2202x AM-DC2203x AM-DC2204x AM-DC2205x
300 W 1 Kw
2 Kw
DIN 7/16 DIN 7/16 DIN 7/16 DIN 7/16 DIN 7/16 DIN 7/16 EIA 1 5/8" EIA 1 5/8" EIA 1 5/8" EIA 1 5/8" EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" EIA 3 1/8" EIA 3 1/8" EIA 3 1/8"
Insertion Loss in Wide Band (without filter) < 0.1 dB < 0.1 dB < 0.1 dB < 0.1 dB < 0.1 dB < 0.1 dB < 0.1 dB < 0.1 dB < 0.1 dB <0.15 dB < 0.1 dB < 0.1 dB < 0.1 dB < 0.1 dB < 0.1 dB < 0.1 dB < 0.1 dB
5 Kw
RADIO DAB
AM - 1130
Technical Specification Frequency 195 - 223 MHz Polarization Vertical H Beamwidth Omni V Beamwidth Gain VSWR Impedance Power Handling Connectors Lightning Protection 28 5 dBi < 1.5 : 1 Broadband 50 500 W DIN 7/16 Female DC Grounded
Colinear antena. High gain design. Low profile & lightweight. High peak power rating. Low intemodulation products Depth Diameter Weight Mounting Wind Load Materials 3260 65 8 To suit pole 60 mm 35 Kg @ 180 Km/h Plated connector. Copper dipoles, aluminium spigot. Rugged fibreglass protection radome All parts welded mm mm Kg
AM- 1150
Technical Specification Frequency 195 - 223 MHz Polarization Vertical H Beamwidth Omni (ex-tower influence) V Beamwidth 80 Gain 2,15 dBi VSWR < 1.3 : 1 Broadband Impedance 50 Power Handling 2 Kw Connectors DIN 7/16 Lightning Protection DC Grounded Tower influence 3-5 dB AM-1150 BAYS 2 4 6 8 10 VERTICAL BEAMWIDTH 36 17 11,4 8,5 7 GAIN (dBi) 5 8 10 11 12
DAB dipole. Gamma match adaptation. Fully stainless steel Depth Width Heigth Weight Mounting Wind Load Materials 430 mm 125 mm 700 mm 6 Kg To suit pole 60 mm 25 Kg @ 160 Km/h Stainless steel, silver plated brass, copper-berylium and PTFE
POWER (Kw) 4 8 12 16 20
INPUT SPLITTER EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" EIA 3 1/8" EIA 3 1/8"
AM- 1180
Technical Specification Frequency Polarization H Beamwidth V Beamwidth Gain VSWR Impedance Power Handling Connectors Lightning Protection 195 - 223 MHz Vertical 160 18 10 dBi < 1.5 : 1 Broadband 50 250 w DIN 7/16 (F) DC Grounded
Four Folded Colinear Dipoles. Electrical tilt available. Offsset horizontal radiation pattern.
mm mm Kg
HIGH GAIN
DAB 2 Dipoles panel antenna. Wideband & multichannel capability. High reliability & long operative life.
To suit pole 42 - 48 mm Front 65 Kg, Side 28 Kg @ 200 Km/h hot dip galvanized reflector and dipoles plated connectors. passive brass in feeding lines
AM - 1170
Technical Specification Frequency Polarization H Beamwidth V Beamwidth Gain VSWR Impedance Power Handling Connectors Lightning Protection Front to back ratio 174 - 230 MHz Horizontal 70 30 13,5 dBi < 1.1 : 1 Broadband 50 2 Kw / 5 Kw DIN 7/16 / DIN 13/30 DC Grounded > 18 dB Vertical 60 26
DAB 4 dipoles panel antenna. Wideband & multichannel capability. High reliability & long operative life.
mm mm mm Kg
To suit pole 75,5 mm (2 1/2") Front 120 Kg, Side 45 Kg @ 200 Km/h hot dip galvanized reflector and dipoles plated connectors. passive brass in feeding lines
AM- 1160
Technical Specification Frequency Polarization VSWR Impedance Power Handling Connectors Lightning Protection Front to Back Ratio 195 - 223 MHz Horizontal and Vertical < 1.3:1 fo +/-2% < 1.5:1 fo +/-10% 50 100 w N (F) DC Grounded 16 to 20 dB
2 to 10 Kg To suit pole 50 to 60 mm 200 Km/h Stainless steel and teflon -40C to +70C
AM-1160 Gain (dBi) AM-1160-011 AM-1160-111 AM-1160-211 AM-1160-311 AM-1160-411 AM-1160-511 AM-1160-711 5 7 8.5 10 11.5 12 13 Beamwidth E () 75 65 60 52 45 38 31 Beamwidth H () 170 105 80 63 56 50 45 Lenght (mm) 395 654 1084 1422 1760 2098 2774
RADIO DAB
Technical Specification Frequency 174 - 230 MHz VSWR < 1.05 : 1 Broadband Impedance 50 Insertion loss < 0,18 dB Power From 0.6 to 20 Kw Input Connector EIA / DIN Output Connector EIA / DIN Distribution Symmetrical phase & amplitude
Typical Length
AM-S3
AM-S322x DAB AM-S332x DAB AM-S352x DAB AM-S353x DAB AM-S355x DAB AM-S372x DAB AM-S373x DAB AM-S375x DAB AM-S377x DAB
Way number 2 x x x x x x x x x x x x 3 x x x x x x 4 5 6 8
type
DIN 7/16 (F) EIA 7/8" EIA 1 5/8"
code
2 3 5 5 5 7 7 7 7
type
DIN 7/16 DIN 7/16 DIN 7/16 EIA 7/8" EIA 1 5/8" DIN 7/16 EIA 7/8" EIA 1 5/8" EIA 3 1/8"
code
2 2 2 3 5 2 3 5 7
EIA 3 1/8"
RADIO DAB
AM-FA
Power code Insertion Loss fo 1 dB 0.9 dB Atenuation (dB) fo +/- 0.77MHz 1.8 dB 1.5 dB fo +/-0.97 MHz 11 dB 11 dB fo +/- 1.75 MHz 44 dB 44 dB
Power 1 Kw 1.5 Kw
code 00 01
Input connector
AM-FA00 AM-FA01
AM-FA
Dimensions (mm) Length AM-FA00 AM-FA01 623 923 Heigth 541 541 Width 426 626 Weight (Kg) 85 102
Other Input/Output connector uppon request Other Powers, contact factory (174-230 Mhz) opcional
RADIO DAB
STARPOINT COMBINERS
AM-CSA
Technical Specification Frequency VSWR Impedance Isolation between inputs: Group Delay Number of inputs Minimum freq. Spacing: 174 -230 MHz <1.15 : 1 (in one block) 50 70 dB typical < 700 ns 2 to 4 one block Connectors Materials Electrolytic copper, silver-plated and passived brass, teflon isolators, copper-berylllium connectors termical processed Cavities in brass. EIA 1 5/8"
AM-CSA
Power code
N inputs Atenuation (dB) fo +/- 0.77MHz fo +/-0.97 MHz 11 dB 11 dB fo +/- 1.75 MHz 44 dB 44 dB Dimension s (mm) Length 650 950 Heigth 1100 1100 Width 500 650 Weight (Kg) 175 215
Input
code
code
Insertion Loss
AM-CSA012 AM-CSA022
1 Kw 1.5 Kw
01 02
2 2
1 dB 0.9dB
1.8 dB 1.5 dB
AM-CDA
N inputs code Insertion Loss in Narrow Band 1 dB 0.9dB Atenuation (dB) fo +/- 0.77MHz 1.8 dB 1.5 dB fo +/-0.97 MHz 11 dB 11 dB fo +/- 1.75 MHz 44 dB 44 dB Dimension s (mm) Length 900 1200 Heigth 1400 1400 Width 600 750
AM-CDA002 AM-CDA012
1 Kw 1.5 Kw
00 01
2 2
Other Input/Output connector uppon request Other Powers or adjacent blocks, contact factory
TV Banda I
AM - BIP2DD-ST
Technical Specification Frequency Polarization H Beamwidth V Beamwidth Gain VSWR 47-68 MHz (CCIR) / 54-88 (FCC) H 72 56 7 dBd Length (mm) Width (mm) Height (mm) Weight (Kg) Wind Load (Kg) Wind Speed (Km/h) Mounting Materials FCC Ch2-3-4 2840 3760 1400 140 Ch3-4-5 2540 3400 1300 130 Ch4-5-6 2340 3100 1200 110
< 1.1 : 1 (Factory tuned for 1 Channels) < 1.3 : 1 (Factory tuned for 3 Channels) Impedance 50 Power Handling & Conectors DIN 7/16 (F) DIN 1 5/8" EIA Lightning Protection DC Grounded
Front 120 Kg ,Side 24 @ 160 Km/h 225Km/h To suit pole 114 mm Hot dip galvanized dipoles. Feeding lines in copper, Teflon isolators, hot dip galvanized reflector grid.
AM-BI Panel BAYS FACES GAIN (dBd) 3.7 2 -0.4 9.7 6.7 5 2.6 21.7 9.7 8 5.6 14.5 11.5 9.8 7.4 15.7 12.7 11 8.6 POWER (kW) 7/16 8 12 16 8 16 24 32 16 32 48 64 24 48 72 96 32 64 96 128 41 37 33 30.5 28 24 20 18 16 9.3 9 8 LENGHT (Mts) FCC Ch2-3-4 4 Ch3-4-5 3.6 Ch 4-5-6 3.2 2 1 3 4 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4
TV Banda I
AM-S1 type
AM-S122x AM-S132x AM-S112x AM-S144x AM-S152x AM-1533x AM-S154x AM-S155x AM-S172x AM-S173x AM-S174x AM-S175x AM-S177x AM-S184x AM-S185x AM-S187x AM-S197x AM-S198x AM-S199x EIA 6 1/8" EIA 4 1/2" EIA 3 1/8" EIA 1 5/8" DIN 7/16 (F) EIA 7/8" DIN 13/30 (F)
TV Banda III
DIRECTIONAL PANEL
HIGH GAIN
AM - 2D BIII PANEL
Technical Specification Frequency Polarization H Beamwidth V Beamwidth Gain VSWR Impedance Power Handling Connectors Lightning Protection Front to back ratio 174 - 230 MHz Horizontal 70 60 10 dBi < 1.15 : 1 Broadband 50 2 Kw / 5 Kw DIN 7/16 / DIN 13/30 DC Grounded > 18 dB Vertical 60 70
High Power:5 Kw per panel. Ideal for stacking for any radiation pattern. (174 - 254 MHz upon Request)
mm mm mm Kg
To suit pole 42 - 48 mm Front 65 Kg, Side 28 Kg @ 200 Km/h hot dip galvanized reflector and dipoles plated connectors. passive brass in feeding lines
AM - 4D BIII PANEL
Technical Specification Frequency Polarization H Beamwidth V Beamwidth Gain VSWR Impedance Power Handling Connectors Lightning Protection Front to back ratio 174 - 230 MHz Horizontal 70 30 13,5 dBi < 1.1 : 1 Broadband 50 2 Kw / 5 Kw DIN 7/16 / DIN 13/30 DC Grounded > 18 dB Vertical 60 26
High Power:5 Kw per panel. Ideal for stacking for any radiation pattern. (174 - 254 MHz upon Request)
mm mm mm Kg
To suit pole 75,5 mm (2 1/2") Front 120 Kg, Side 45 Kg @ 200 Km/h hot dip galvanized reflector and dipoles plated connectors. passive brass in feeding lines
AM-4D BIII Panel BAYS FACES 2 1 3 4 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4 GAIN (dBd) 8.2 6.7 5.8 13.8 11.2 9.7 8.8 16.8 14.2 12.5 11.7 18.5 15.8 14.3 13.4 19.8 17.2 15.7 14.8 WEIGHT (Kgs) 166 249 332 166 332 498 664 332 664 996 1328 498 996 1494 1992 664 1328 1992 2656 23.2 17.4 11.6 5.8 2.9 LENGHT (Mts) POWER (Kw) DIN 7/16 DIN 13/30 4 6 8 4 8 12 16 8 16 24 32 12 24 36 48 16 32 48 64 10 15 20 10 20 30 40 20 40 60 80 30 60 90 120 40 80 120 160
TV Banda III
HIGH GAIN
Demountable panel. Ideal for stacking for any radiation pattern. Depth Width Depth Weight Mounting Wind Load Wind Velocity Materials Temperature 450 mm 1200 mm 1200 7mm To suit pole 42 - 114 mm Front 33 Kg, Side 12 Kg @ 160 Km/h 200 Km/h Aluminium -40C to +70C
Yagi BIII. Several Gains. Light and strong design Weight Mounting Wind Speed Materials Temperature 2 to 10 Kg To suit pole 50 to 60 mm 200 Km/h Stainless steel and teflon -40C to +70C
AM-1160 Gain AM-1160-011 AM-1160-111 AM-1160-211 AM-1160-311 AM-1160-411 AM-1160-511 AM-1160-711 (dBi) 5 7 8.5 10 11.5 12 13 Beamwidth E () 75 65 60 52 45 38 31 Beamwidth H () 170 105 80 63 56 50 45 Lenght (mm) 395 654 1084 1422 1760 2098 2774
TV Banda III
Typical Length
AM-S3
AM-S311x AM-S322x AM-S332x AM-S342x AM-S344x AM-S352x AM-S353x AM-S354x AM-S355x AM-S372x AM-S373x AM-S374x AM-S375x AM-S377x AM-S384x AM-S385x AM-S387x AM-S307x
Way number 2 x x x x x x x x 3 x x x x x x 4 x x x x x x x x x x x x x x x x x x x x x x 5 6 x x x x x x x x 8 10 12
type
N(F) DIN 7/16 (F) EIA 7/8" DIN 13/30 (F)
code
1 2 3 4 4 5 5 5 5 7 7 7 7 7 8 8 8 0
type
N(F) DIN 7/16 DIN 7/16 DIN 7/16 DIN 13/30 DIN 7/16 EIA 7/8" DIN 13/30 EIA 1 5/8" DIN 7/16 EIA 7/8" DIN 13/30 EIA 1 5/8" EIA 3 1/8" DIN 13/30 EIA 1 5/8" EIA 3 1/8" EIA 3 1/8"
code
1 2 2 2 4 2 3 4 5 2 3 4 5 7 4 5 7 7
EIA 1 5/8"
EIA 3 1/8"
x x
x x x x
AM-F3
Power code Power code 00 01 05 10 Input connector N(F) DIN 7/16 EIA 1 5/8" EIA 3 1/8" Output connector N(F) DIN 7/16 EIA 1 5/8" EIA 3 1/8" Insertion Loss (dB) 0.4 dB 0.4 dB 0.3 dB 0.2 dB Dimensions (mm) Length 350 600 800 1000 Heigth 250 600 620 620 Width 50 120 200 300 Weight (Kg) 3.5 30 70 100
500 W 1 Kw 5 Kw 10 Kw
Vertical Output for easier instalation. Other Input/Output connector uppon request Other powers, contact factory
TV Band III
Output Connector
AM-CS3
Power code Input Power code 00 01 05 10 Channel spacing minimum 4 Channels 4 Channels 4 Channels 4 Channels Input connector DIN 7/16 EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" Insertion Loss 0.5 dB 0.4 dB 0.3 dB 0.2 dB
500 W 1 Kw 5 Kw 10 Kw
Output Connector
AM-CS3
Power code Input Power code 00 01 05 10 Channel spacing minimum 2 Channels 2 Channels 2 Channels 2 Channels Input connector DIN 7/16 EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" Insertion Loss in Narrow Band 0.5 dB 0.4 dB 0.3 dB 0.2 dB Insertion Loss in Wide Band (without filter) 0.1 dB 0.1 dB 0.1 dB 0.1 dB
500 W 1 Kw 5 Kw 10 Kw
DIRECTIONAL PANEL
HIGH GAIN
Panel 4 Printed Dipoles. Ideal for stacking for any radiation pattern. 5 Channels in Vertical. Length Width Heigth Weight Mounting Wind Load Wind Speed Materials Temperature Radome 220 mm 500 mm 1000 mm 15 Kg Using M8 x 40 mm screws( supplied) 55 Kg Front @ 160 Km/h 200 Km/h Dipoles in printed circuit. Feeder lines in passived brass and silvery -40C to +70C PRFV in Red
AM - 4D BIV/V CI PANEL
Technical Specification Frequency 470 - 862 MHz Polarization Lineal (Hor. or Vert.) H Beamwidth 60 V Beamwidth 24 Gain 13,5 dBi VSWR < 1.3 : 1 Broadband Impedance 50 Power Handling & Conectors N (F) 100 w DIN 7/16 (F) 500 w Lightning Protection DC Grounded
AM - 4D BIV/V PANEL
Technical Specification Frequency 470 - 862 MHz Polarization Lineal (Hor. or Vert.) H Beamwidth 60 V Beamwidth 24 Gain 13,5 dBi VSWR < 1.15 : 1 Broadband Impedance 50 Power Handling & Conectors DIN 7/16 (F) 1Kw 7/8" EIA 2,5 Kw Lightning Protection DC Grounded
High Power:2,5 Kw per panel. Ideal for stacking for any radiation pattern. Depth Width Heigth Weight Mounting Wind Load Wind Speed Materials Temperature Radome 220 mm 500 mm 1000 mm 10 Kg Using M8 x 40 mm screws( supplied) 55 Kg Front @ 160 Km/h 200 Km/h Dipoles feeder lines and reflector in aluminum -40C to +70C PRFV in Red
AM-BIV/V CI PANEL / AM-BIV/V PANEL POWER GAIN BAYS 1 FACES 2 3 4 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4 (dBd) 9.8 8.4 7.4 15.3 12.8 11.4 10.4 18.3 15.8 14.4 13.4 20.1 17.6 16.2 15.2 21.3 18.8 17.4 16.4 WEIGHT (Kgs) 30 45 60 30 60 90 120 60 120 180 240 90 180 270 360 120 240 360 480 8 6 4 2 1 LENGHT (Mts) AM-BIV/V CI PANEL (Kw) N(F) 0.2 0.3 0.4 0.2 0.4 0.6 0.8 0.4 0.8 1.2 1.6 0.6 1.2 1.8 2.4 0.8 1.6 2.4 3.2 DIN 7/16 (F) 1 1.5 2 1 2 3 4 2 4 6 8 3 6 9 12 4 8 12 16 AM-BIV/V PANEL (Kw) DIN 7/16 /F) 2 3 4 2 4 6 8 4 8 12 16 6 12 18 24 8 16 24 32 DIN 13/30 (F) 5 7.5 5 5 10 15 20 10 20 30 40 15 30 45 60 20 40 60 80
AM-YINX-UHF Type AM-YINX-UHF AM-YINX-13.1.1B AM-YINX-13.1.1C AM-YINX-13.1.1D AM-YINX-13.1.1E AM-YINX-13.1.1F AM-YINX-13.1.1G Channels 21-27 28-34 35-41 42-48 49-55 56-62 63-69 Frequency (MHz) 470 - 526 526 - 582 582 - 638 638 - 694 694 - 750 750 - 806 806 - 862
Typical Length
AM-S4
AM-S411x AM-S422x AM-S432x AM-S442x AM-S444x AM-S452x AM-S453x AM-S454x AM-S455x AM-S473x AM-S474x AM-S475x AM-S477x AM-S484x AM-S485x AM-S487x AM-S407x
Input connector code type N(F) DIN 7/16 (F) EIA 7/8" DIN 13/30 (F) code 1 2 3 4 4 5 EIA 1 5/8" 5 5 5 7 EIA 3 1/8" 7 7 7 8 EIA 4 1/2" EIA 6 1/8" 8 8 0
Output connector code type N(F) DIN 7/16 DIN 7/16 DIN 7/16 DIN 13/30 DIN 7/16 EIA 7/8" DIN 13/30 EIA 1 5/8" EIA 7/8" DIN 13/30 EIA 1 5/8" EIA 3 1/8" DIN 13/30 EIA 1 5/8" EIA 3 1/8" EIA 4 1/2" code 1 2 2 2 4 2 3 4 5 3 4 5 7 4 5 7 7 x x x x x x x x x x x x x x x 2 x x 3 x x
Way number 4 x x x x x x x x x x x x x x x x x x x x x x x x x 5 6 8
TV UHF
AM-F4
Power code Power code 00 02 05 10 Input connector DIN 7/16 EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" Output Connector DIN 7/16 EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" Insertion Loss (dB) 1 dB 0.4 dB 0.3 dB 0.2 dB Frequency Spacing (MHz) Atenuation 20 dB +/- 20 MHz +/- 20 MHz +/- 20 MHz +/- 20 MHz Atenuation 35 dB +/- 30 MHz +/- 35 MHz +/- 35 MHz +/- 35 MHz
200 W 2 Kw 5 Kw 10 Kw
AM-F4
Dimensions (mm) Length AM-F4003 AM-F4023 AM-F4053 AM-F4103 175 344 491 578 Heigth 120 430 400 440 Width 40 118 167 196 Weight (Kg) 1.5 11.5 18 23.5
Vertical Output for easier instalation. Other Input/Output connector uppon request Other powers, contact factory
TV UHF
AM-CS4
Power code Input Power code 00 02 05 10 Channel spacing minimum 5 Channels 5 Channels 5 Channels 5 Channels Input connector DIN 7/16 EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" Insertion Loss 1 dB 0.4 dB 0.3 dB 0.2 dB
200 W 2 Kw 5 Kw 10 Kw
Output Connector
AM-CD4
Power code Input Power code 00 01 02 05 10 Channel spacing minimum 3 Channels 3 Channels 3 Channels 3 Channels 3 Channels Input connector DIN 7/16 DIN 7/16 EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" Insertion Loss in Narrow band 1 dB .5 dB 0.4 dB 0.3 dB 0.2 dB Insertion Loss in Wide Band (without filter) 0.1 dB 0.1 dB 0.1 dB 0.1 dB 0.1 dB
200 W 1 Kw 2 Kw 5 Kw 10 Kw
Other Input/Output connector uppon request Other Powers,and other channel spacing contact factory
TV DVB
DIRECTIONAL PANEL
HIGH GAIN
Channels between 57-69. Ideal for stacking for any radiation pattern.
AM - DVB PANEL
Technical Specification Frequency Polarization H Beamwidth V Beamwidth Gain VSWR Impedance 758 - 862 MHz Horizontal 60 30 13 dBi < 1.15 : 1 Broadband 50
mm mm mm Kg
To suit pole 42-48 mm Front 33 Kg, Side12 Kg @ 200 Km/h Hot dip steel reflector, fibre glass, plated connectors. Plated and passived
Power Handling & Conectors DIN 7/16 (F) DIN 13/30 (F) Front to Back Ratio Lightning Protection > 20 dB DC Grounded 1Kw 2,5 Kw Temperature Radome
AM-DVB PANEL BAYS FACES 2 1 3 4 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4 GAIN (dBd) 7.8 6.1 4.8 13.8 10.8 9.1 7.8 16.8 13.8 12.1 10.8 18.6 15.6 13.8 12.5 19.8 16.8 15.1 13.8 WEIGHT (Kgs) 10 15 20 10 20 30 40 20 40 60 80 30 60 90 120 40 80 120 160 5.95 4.45 2.95 1.45 0.7 LENGHT (Mts) 2 3 4 2 4 6 8 4 8 12 16 6 12 18 24 8 16 24 32 POWER (Kw) DIN 7/16 DIN 13/30 5 7.5 10 5 10 15 20 10 20 30 40 15 30 45 60 20 40 60 80
TV DVB
Technical Specification Frequency 758 - 862 MHz VSWR < 1.05 : 1 Broadband Impedance 50 Insertion loss < 0,18 dB Power From 0.6 to 80 Kw Input Connector N / EIA / DIN Output Connector N / EIA / DIN Distribution Symmetrical phase & amplitude
Typical Length
AM-S4
AM-S422x DVB AM-S432x DVB AM-S442x DVB AM-S452x DVB AM-S553x DVB AM-S554x DVB AM-S555x DVB AM-S572x DVB AM-S573x DVB AM-S575x DVB AM-S585x DVB AM-S587x DVB
Input connector code type DIN 7/16 (F) EIA 7/8" DIN 13/30 (F) EIA 1 5/8" code 2 3 4 5 5 5 5 7 7 7 8 8
Output connector code type DIN 7/16 DIN 7/16 DIN 7/16 DIN 7/16 EIA 7/8" DIN 13/30 EIA 1 5/8" DIN 7/16 EIA 7/8" EIA 1 5/8" EIA 1 5/8" EIA 3 1/8" code 2 2 2 2 3 4 5 2 3 5 5 7 2 x x x x x x x 3 x x x x x x
Way number 4 x x x x x x 5 6 x x x x x x x x x x x x x x 8
TV DVB
Connectors:
AM-F2
Power AM-F2038 2 Kw
Power code code 03 Atenuation (dB) Insertion Loss (dB) fo fo +/- 3.8MHz fo +/- 4.2 MHz fo +/- 6.0MHz 0.8 dB 1.8 dB >11 >40
AM-F2
Dimensions (mm) Length AM-F2038 702 Heigth 407 Width 350 Weight (Kg) 60 Kg
TV DVB
AM-CD2 fo
AM-CDV038x 0.8 dB fo +/- 3.8 Mhz 1.8 dB
Attenuation Narrow Band to antenna fo +/- 4.2 Mhz >11 fo +/- 6 Mhz >40 dB BroadBand to antenna fo 0.15 dB fo +/- 3.8 MHz 3 dB Length 866
Accesories
Accessories
Frequency VSWR
50 negligibles
Rigid line 50 Ohm rigid coaxial transmission line Anchor insulator connector inner(inner connector) Straight adaptor-without inners inside(unflanged coupling) Elbows - silver plated brass (with clamping connections) Flange with campling connection
1" 5/8 x x x x x
3" 1/8 x x x x x
43-98 x x x x -
4 1/2" x x x x x
6" 1/8 x x -
Adapters N DIN 7/16 DIN 13/30 7/8" 1" 5/8 3" 1/8 6" 1/8
Codigo: (AM-xxxxxx) Unit Unit unit unit unit unit unit unit N x x x x x DIN 7/16 x x x DIN 13/30 x 7/8" 1" 5/8 x x x x x 3" 1/8 x x x 4 1/8" x x
Coaxial Connectors Cable code Connector N DIN 7/16 DIN 13/30 7/8" 1" 5/8 3" 1/8 43/98 4 1/2"
Codigo: (AM-xxxxxxxxxxx) RG-213 Codigo: (AM-xxxxxxxxxxx) x x x x x x x x x x x x x 1/2" x 7/8" x 1" 5/8 x 3" 1/8 x 4 1/8" 5" 6" 1/8 -
Codigo: (AM-xxxxxxxxxxx) 47 - 860 MHz <1.05 : 1 Broadband 34 dB Impedance Insertion loss 50 negligibles
DIN 13/30 -
7/8" -
1" 5/8 x -
3" 1/8 x
43/98 -
6" 1/8 -
Avenida Real de Pinto n 150 Nave B 28021 Madrid tf : +34 91 710 94 50 fax :+34 91 710 94 51 www.antenasmoyano.com