Professional Documents
Culture Documents
Postextr
Postextr
Post Process Commands Post Process/View Fields Post Process/Create Executive Parameters Macro Removing Single Selections Removing All Selections
Optimetrics for HFSS Post Processing with Optimetrics Post Process Commands
When you access HFSS from Optimetrics, two new commands replace the existing commands in the Post Process menu: View Fields Create Executive Parameters Macro Accesses the 3D Post Processor to allow you to analyze the fields. Creates post-processing macros that extract executive parameter data and use it in the parametric module.
You must specify which data to use and assign a name to be used in the software. Optimetrics reads the database file to extract the solution variable information.
Topics:
Post Process Commands Post Process/View Fields Post Process/Create Executive Parameters Macro Removing Single Selections Removing All Selections
Optimetrics for HFSS Post Processing with Optimetrics Post Process/Create Executive Parameters Macro
HFSS in Optimetrics When you choose this command, the following window appears:
More
> To define the output parameters: 1. Choose Post Process/Create Executive Parameters Macro. A window appears, allowing you to define the parameters for the project. 2. Select the Solution Type to use. You may select from any of the quantities you defined when you set up the nominal problem. 3. Select the Group from which to take the parameters for the macro. This list is comprised of all the setups you created in the Setup Executive Parameters step of the nominal problem definition. 4. Enter the variable name in the Parameter Name field. This name will be used in the Optimetrics module. 5. Do one of the following: Choose Add Selection to add the entered parameter as a circuit parameter into
2 Copyright 1996-2001 Ansoft Corporation
Topics:
Post Process Commands Post Process/View Fields Post Process/Create Executive Parameters Macro Removing Single Selections Removing All Selections
The file is saved and can now be used to extract the parameters.