Professional Documents
Culture Documents
Anchor Fastening Design For HST-M16: Positioning
Anchor Fastening Design For HST-M16: Positioning
Anchor Fastening Design For HST-M16: Positioning
1 of 4
Positioning
Anchoring plate:
lx=220 mm ly=200 mm s1=150 mm c1=100 mm c3=100 mm Anchor Anchor in slotted hole
c3
s1
c1
Vy
Concrete
Compressive class: C20/25 Compression zone / uncracked concrete Thickness of base material: 350 mm factor depth of embedment: 1.0 straight and close-mesh stirrup-type edge reinforcement (O >= 12mm) close reinforcement (close reinforcement (s <= 15 cm))
Data and results must be checked for agreement with the actual existing conditions and for plausibility! HAP v3.3c 2003 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
2 of 4
Tension Load N
Anchor Design value of tension load Design value of anchor group NSd,i
n
HST-M16
1 0.0 kN = 0.0 kN 2 0.0 kN
NSd = NSd,i
g i=1
Steel failure
Characteristic value for one anchor Partial safety factor NRk,s = -- Ms = 1.00 NRk,s Ms NSd = 0.00 NRd,s
h
NRd,s =
= ---
Check
Pullout failure
Characteristic value for one anchor Partial safety factor NRk,p = -- Mp = 1.00 NRk,p Mp NSd = 0.00 NRd,p
h
NRd,p =
= ---
Check
NRk,c Ac,N A
0 c,N
s,N
ec,N,y = 1.00
Ac,N A
0 c,N
s,N re,N ec,N,x ec,N,y T fB,N = -- Mc = 1.00 NRk,c Mc NSd = 0.00 NRd,c
g
NRd,c =
= ---
Check
Data and results must be checked for agreement with the actual existing conditions and for plausibility! HAP v3.3c 2003 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
3 of 4
Shear Load V
Anchor Design value of shear in x Design value of shear in y VSd,x,i VSd,y,i
n g Sd,x
HST-M16
1 0.0 kN -16.0 kN
g Sd,y
2 0.0 kN -16.0 kN
n
= VSd,x,i = 0.0 kN
i=1
= VSd,y,i = -32.0 kN
i=1
VSd,i
16.0 kN
16.0 kN
VRk,c Ac,V A
0 c,V
ec,V,y = 1.00
Ac,V Ac,V
0
VRk,c,x = --g
VRd,c =
= ---
Check
Data and results must be checked for agreement with the actual existing conditions and for plausibility! HAP v3.3c 2003 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan
4 of 4
HST-M16
Data and results must be checked for agreement with the actual existing conditions and for plausibility! HAP v3.3c 2003 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan