Professional Documents
Culture Documents
Surface Mount Infrared Light Emitting Diode: Package Dimensions
Surface Mount Infrared Light Emitting Diode: Package Dimensions
Surface Mount Infrared Light Emitting Diode: Package Dimensions
0.094 (2.4)
FEATURES
0.043 (1.1) 0.020 (0.5)
SCHEMATIC
ANODE
NOTES: 1. Dimensions are in inches (mm) 2. Tolerance of .010 (.25) on all non nominal dimensions unless otherwise specified.
(TA = 25C unless otherwise specified) Symbol Topr Tstg Tsol IF VR IFM PD Rating -55 to +100 -55 to +100 260 for 10 sec 100 5 1.75 180 Unit C C C mA V A mW
NOTES
1. Derate power dissipation linearly 2.4 mW/C above 25C. 2. RMA flux is recommended. 3. Methanol or isopropyl alcohols are recommended as cleaning agents. 4. Pulse conditions; tp = 100 s, T = 10 ms.
(TA =25C)
MIN. TYP. MAX. UNITS
SYMBOL
P
Peak Emission Wavelength Spectral Bandwidth Emission Angle Forward Voltage Reverse Current Radiant Intensity Radiant Flux Temp. Coeff. of IE Temp. Coeff. of VF Temp. Coeff. of Rise Time Fall Time
IF = 100 mA IF = 100 mA IF = 100 mA IF = 100 mA, tp = 20 ms IF = 1 A, tp = 100 s VR = 5 V IF = 100 mA, tp = 20 ms IF = 1 A, tp = 100 s IF = 100 mA, tp = 20 ms IF = 100 mA IF = 100 mA IF = 100 mA IF = 100 mA
1.8 3.8 1 8 1 1
nm nm Deg. V
VF IR Ie
e
A
mW/sr mW %/K mV/K nm/K
TCI TCV TC tr tf
s s
1 OF 3
www.fairchildsemi.com
QEB421
SURFACE MOUNT INFRARED LIGHT EMITTING DIODE
TYPICAL PERFORMANCE CURVES
Normalized to: IF = 100 mA Pulsed tpw =100 us Duty Cycle = 0.1% TA = 25C
101
100
0.1
10-1
0.01
10-2
10-3 0.8
1.0
1.2
1.4
1.6
IF = 50 mA
IF = 100 mA
IF = 20 mA
1
0.8
0.6
0.4
0.2
0.0
0.2
0.4
0.6
0.8
TA - TEMPERATURE (C)
www.fairchildsemi.com
2 OF 3
2/26/01
DS300385
QEB421
SURFACE MOUNT INFRARED LIGHT EMITTING DIODE
DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
DS300385
2/26/01
3 OF 3
www.fairchildsemi.com