Sunpower Panel Spec

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

E19 / 320 SOLAR PANEL

MAXIMUM EFFICIENCY AND PERFORMANCE

BENEFITS
Highest Efficiency SunPowerTM Solar Panels are the most efficient photovoltaic panels on the market today. More Power Our panels produce more power in the same amount of spaceup to 50% more than conventional designs and 100% more than thin film solar panels. Reduced Installation Cost More power per panel means fewer panels per install. This saves both time and money. Reliable and Robust Design Proven materials, tempered front glass, and a sturdy anodized frame allow panel to operate reliably in multiple mounting configurations.
The planets most powerful solar panel. The SunPowerTM 320 Solar Panel provides todays highest efficiency and performance. Utilizing 96 back-contact solar cells, the SunPower 320 delivers a total panel conversion efficiency of 19.6%. The 320 panels reduced voltage-temperature coefficient, anti-reflective glass and exceptional low-light performance attributes provide outstanding energy delivery per peak power watt.

SunPowers High Efficiency Advantage

20% 15% 10% 5% 0% 10% 14%

18%

19%

Thin Film

Conventional

SunPower E18 Series

SunPower E19 Series

SPR-320E-WHT-D

E19 / 320 SOLAR PANEL


MAXIMUM EFFICIENCY AND PERFORMANCE
Electrical Data
Measured at Standard Test Conditions (STC): irradiance of 1000W/m, AM 1.5, and cell temperature 25 C

I-V Curve
320 W 19.6 %
1000 W/m at 50 C 1000 W/m

Peak Power (+5/-3%) Efficiency Rated Voltage Rated Current Open Circuit Voltage Short Circuit Current Maximum System Voltage Temperature Coefficients

Pmax Vmpp Impp Voc Isc UL Power (P) Voltage (Voc) Current (Isc)

Current (A)

54.7 V 5.86 A 64.8 V 6.24 A 600 V -0.38% / K -176.6mV / K 3.5mA / K 45 C +/-2 C 15 A

800 W/m

500 W/m

200 W/m

Voltage (V)
Current/voltage characteristics with dependence on irradiance and module temperature.

NOCT Series Fuse Rating

Tested Operating Conditions


Temperature Max load - 40 F to +185 F (-40 C to + 85 C)
113psf 550 kg/m (5400 Pa), front (e.g. snow) w / specified mounting configurations 50 psf 245 kg/m2 (2400 Pa) front and back e.g. wind

Mechanical Data
Solar Cells Front Glass Junction Box Output Cables Frame Weight
4

96 SunPower all-back contact monocrystalline High transmission tempered glass with anti-reflective (AR) coating IP-65 rated with 3 bypass diodes Dimensions: 32 x 155 x 128 (mm)
1000mm length cables / MultiContact (MC4) connectors

Impact Resistance

Hail 1 in (25 mm) at 51mph (23 m/s)

Warranties and Certifications


Warranties 25 year limited power warranty 10 year limited product warranty Certifications Tested to UL 1703. Class C Fire Rating
1

Anodized aluminum alloy type 6063 (silver); stacking pins 41.0 lbs (18.6 kg)
3 2

Dimensions

MM (IN) D

Grounding Holes Stacking Pins

2X 4X 399 * 15.70 2X 30 1.18

262 10.30 2X 577 22.70

2X

1200 47.24 12 6.6 .26 8 4.2 .17

D 4X 180 7.07 4X 230.8 9.09

C 1046 41.18 2X 4.2 [.17]

1559 61.39

4X 3.2 * .13 46 1.81

4X 4X 12 .47

322 12.69

2X 2X

915 36.02 1535 60.45

* STACKING PIN LOCATIONS

CAUTION: READ SAFETY AND INSTALLATION INSTRUCTIONS BEFORE USING THE PRODUCT.
UNLESS OTHERWISE SPECIFIED: Visit sunpowercorp.com for 3939 NORTH FIRST STREET details DIMENSIONS ARE IN MM TOLERANCES ARE:

SUNPOWER and the SUNPOWER logo are trademarks or registered trademarks of SunPower Corporation. DECIMALS ANGLES 1 NONE 3 September 2010 SunPower Corporation. All rights reserved. Specifications included in this datasheet are subject 1.5 change without notice. .X to

SAN JOSE, CA 95134 USA (408) 240-5500


THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF THE SUNPOWER CORPORATION, AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE, OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE, OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION

sunpowercorp.com
Document #001-64281 Rev** / LTR_EN

WITHIN 1/2 SUM TOLERANCES TIR ALL FILLET RADII .25 MAX REMOVE BURRS & SHARP EDGES .25 MAX. DO NOT SCALE DRAWING MATERIAL

MODULE ASSEMBLY, 96-CELL WITH STACKING PIN, DATASHEET DRAWING

2X 11.0 .43 6X 1002 39.45 C 2X 261.5 10.30 B A

You might also like