Professional Documents
Culture Documents
COURSE - LAYOUT 68 Measurement Theory and Instrumentation
COURSE - LAYOUT 68 Measurement Theory and Instrumentation
All discrepancies that required measurement and instrumentation background. COURSE OVERVIEW: The course will cover Different process variables measurements theory& Instrumentation. COURSE OBJECTIVES:
Participants will be able to:
List of Support Tools, Instrumentation and Software (Demo, Video, simulators, etc) will be provided by the Course Provider and will be used in the Course: PC Demonstration video Any Supporting Documents or material to be provided by GASCO:
Describe the basic process variables Specify different sensors and measuring methods for pressure Specify different sensors and measuring methods for temperature Specify different sensors and measuring methods for level Specify different sensors and measuring methods for flow Describe different signal types Specify the different methods of transmition of measured signal and compare between them Describe the parts of conventional 4-20mA loop. Differentiate between cable types. Describe connection between across the closed loop, Junction boxes, Marshalling cabinet, panels, cables .....etc specify closed loop control loop discuss different applied controller for closed loop. Determine control valves main parts and components Discuss the function of control valve parts and its accessories. determine different types of control valves characteristics.
Course Outlines:
Introduction
Pressure Measurement General Theory Pressure Scales Pressure Measurement Common Pressure Detectors Bourdon Tubes Differential Pressure Transmitters Strain Gauges Capacitance Capsule Impact of Operating Environment Failures and Abnormalities Flow Measurement Flow Detectors Square Root Extractor Density Compensating Flow Detectors Flow Measurement Errors Level Measurement Level Measurement Basics Three Valve Manifold Open Tank Measurement Closed Tank Measurement Bubbler Level Measurement System Effect of Temperature on Level Measurement Effect of Pressure on Level Measurement Level Measurement System Errors Temperature Measurement Resistance Temperature Detector (RTD) Thermocouple (T/C) Thermal Wells Thermostats Control Introduction Basic Control Principles Feedback Control Feed forward Control Summary ON/OFF CONTROL Summary Basic Proportional Control Summary Proportional Control Terminology Practical Proportional Control
Summary Reset of Integral Action Rate Or Derivative Action Summary Multiple Control Modes Typical Negative Feedback Control Schemes Level Control Flow Control Pressure Control Temperature Control Signal transmittion and wiring Standard signals conventional 4-20 mA loop wiring, cables and cable glands main cables and branch cables Junction boxes local control panels Marshalling cabinets Systems and control room Control Valves Sliding-stem valves Rotary-stem valves Dampers and louvers Valve packing Valve seat leakage Control valve actuators Valve failure mode Actuator bench-set Pneumatic actuator response Valve positioners Split-ranging Control valve sizing Control valve characterization Control valve problems Hart Application Guide Theory of Operation Communication Modes Frequency Shift Keying HART Networks Point to Point Multidrop HART Commands Benefits of HART Communication 8.4.1 Improved Plant Operations
Operational Flexibility Instrumentation Investment Protection Digital Communication Getting the Most Out of HART Systems
Sample of 10 Pages of the Course Manuals: ___Attached__________________________________________________________ ______________________________________________________________________ __________________________________________________________________. Note: The Course Manual will contain the Handouts as reference book as well as the Presentation Slides which will be used during the Course and supported by the Handouts.
Time
7:30 8:00 8:00 8:30 8:30 10:30 am 10:30 10:45 am 10:45 am 12:30 pm 12:30 1:00pm 1:00 2:00 pm
Pressure measurement
2nd break for Noon prayer (30 minutes)
8:00 8:10 8:10 10:30 am 10:30 10:45 am 10:45 am 12:30 pm 12:30 1:00pm 1:00 2:00 pm
Flow measurement
1st break (15 minutes)
Level measurement
Day 3 Day 2 Recap and revision Quiz for Day 2
8:00 8:10 8:10 10:30 am 10:30 10:45 am 10:45 am 12:30 pm 12:30 1:00pm 1:00 2:00 pm
Temperature measurement
1st break (15 minutes)
Control loop
Day 4 Day 3 Recap and revision Quiz for Day 3
8:00 8:10 8:10 10:30 am 10:30 10:45 am 10:45 am 12:30 pm 12:30 1:00pm 1:00 2:00 pm
Controller
1st break (15 minutes)
Control valve
Day 5 Day 4 Recap and revision Quiz for Day 4
8:00 8:10 8:10 10:30 am 10:30 10:45 am 10:45 am 12:30 pm 12:30 1:00pm 1:00 2:00 pm
HART devices
Hart application guide 2nd break for Noon prayer (30 minutes) Post course exam Evaluation and feedback Summary for Day 5 and Post Course Test INSTRUCTOR CV
Detailed CV with previous Practical Oil and Gas Industries Experiences and Training Experiences. List of similar Courses conducted by the Instructor to be listed with Provider name and for which Company