Professional Documents
Culture Documents
Canon Configuration With Ex
Canon Configuration With Ex
Canon Configuration With Ex
Not all machines are made the same. Some of the settings below wont be present on all models.
Counter 2 Set this to 109 (If CNT-SW is done first this should already be done)
Dust Detection Level Service Mode > Copier > Option > IMG RDR o DFDST L1, DFDST- L2, DF2DFSTL1, DFDSTL2 Set all to 0
CDS Country Select Service Mode > Copier > Function Install > CDS-CTL o Set to CA To scroll through the different regions press the +/-
Allow Firmware Update from UGW Service Mode > Copier > Option >FNC-SW o Page 3 Set CDS-UGW to 1
Adjust Feeder Paper Size Service Mode > Feeder > Function o Select one of the follow/but perform on all
TRY-A4, TRY-A5, TRY-LTR, TRY-LTRR Move the Document Tray guide to the selected option (There is a sticker on the document feeder that will show where to slide the guide) o Press OK It is completed once the screen says OK!
Adjustment of ITB Steering See N08-021-2 related to this service mode >> Double Click mouse here
Service Mode > Copier > Function > Misc P o Page 2 ITB-INIT Initialize
Related Service Mode o Service Mode > Copier > Display > Misc ITB POS
Waste Toner Full Warning (Only applies to the C70XX C90XX color series machines) Service Mode > Adjust > Misc > WT-FL-LM o Set 3
Remaining Toner Settings/Registration> Preferences>Display Settings> o Display Remaining Toner Memory Media Settings/Registration>Preferences>Display Settings>Store Location o Memory Media Turn On Turn On
Register Shortcuts
-
Settings/Registration>Copy>Image Runner Logo>Register Options Shortcuts o Remove Density and Replace with Job Build o Add different size originals
Adjust Clock Settings/Registration>Preferences>Timer/Energy Settings o Date Time Settings Change time zone to GMT 0700
Settings/Registration>Preferences> Timer/Energy Settings o Sleep mode exit time settings Set to 7am (This setting is in a 24 hour clock mode so enter 0700)
Tray Home Position (Applies only when a Finisher is present) Settings/Registration>Function Settings>Common> Paper Output settings o Output tray settings Tray home position (Located top right of screen) Job Secure Time Settings/Registration>Function Settings>Printer>Printer Settings>Custom Settings o Job Securing Time (Page 2) Set to 12 hours Set to off
Data Size Settings/Registration>Function Settings>Send>Email/I-Fax Settings o Maximum Data Size For Sending Send Shortcuts
-
Set to 10mb
Settings/Registration>Function Settings>Send>Common Settings>Register Option Shortcuts o Replace 2 sided copy with File name o Replace Different Size Originals with Subject/Message
Auto Delete Mailboxes Settings/Registration>Function Settings>Store/Access Files>Mailbox Settings>Settings for all Mail Boxes o Time until File Auto Delete Set to 0 = Off
Hold (Applies only to C7000, C9000, 8000 advance series) Settings/Registration>Function Settings>Hold> o Time until hold job Auto delete Set to 12 hours
Timing to Raise(Applies only to C5045,C5051,C7000,C9000,C6000,C8000 advance series) Settings/Registration>Function Settings>Common>Scan Setting o Timing to Raise Feeder Tray When panel touched
o Feeder Jam Recovery Method Auto Offline Settings/Registration>Function Settings>Common>Scan Setting o Auto Offline Turn on From Stopped original
Suspended Job Timeout Settings/Registration>Function Settings>Common>Paper Feed Settings o Suspended Job Timeout Turn on and set to 5 mins
Scanner/Fax/I-Fax off Screen Push Image Runner logo on top right hand of screen o Main Menu button display settings Add a blank to #8 Move fax/ifax and Scanner down so they appear on second page
Shortcut Top Right Push Image Runner logo on top right hand of screen o Top Settings Button Select Shortcut 1 and press Copy Select Shortcut 2 and press Fax
Turn off Show All Push Image Runner logo on top right hand of screen o Other main menu settings Display Show all Turn off
Yes
Black Press ok
Collate plus Offset (Applies only when a Finisher is present) Main Menu>Copy o Select Finishing Highlight Collate and Offset Press ok