Professional Documents
Culture Documents
TT Therm 2011 Eng
TT Therm 2011 Eng
THERM
THERM
Techtile Therm
Techtile Therm, perfectly integrated into brick roofs, is the new way of thinking about solar thermal system integration. Thanks to its similarities with traditional covering and vacuum tube technology, Techtile Therm offers a combination of absolutely revolutionary features. Techtile Therm is ideal for feeding, through the use of suitable tanks or thermal storage, the domestic hot water circuit and for integrating low temperature heating systems, be it a radiant floor or profile.
Techtile System
Techtile Therm is a Techtile System solution: the new revolutionary system that transforms a roof with its standard passive covering function, into an active technology that contributes to the energy needs of the building. This system makes it easier to lay the roof covering and is designed to give added value to the buildings on which it is installed. With Techtile System it is possible to produce electric and thermal energy, at absolutely no cost, directly from the Sun: the system also makes it possible to obtain different levels of architectural integration, thanks to four system solutions that can be applied to a single type of arrangement or covering. All components are built using high quality materials, selected to offer the highest guarantee, in terms of duration, of resistance against the atmospheric elements and natural deterioration. The Techtile System components are: Techtile Basic Techtile Energy Techtile Easy Techtile Smart Techtile Therm roof covering, insulating system and installation arrangement integrated photovoltaic system integrated photovoltaic system integrated modular photovoltaic system integrated solar heating system
SYSTEM
Vacuum tube
Brick
Brown
Sand
THERM
Solar collector
Techtile Therm is equipped with a solar collector consisting of a series of 6 glass tubes with diam. 47mm, length 1,500 mm, double cavity borosilicate, welded at the ends, creating a vacuum inside. The inner cavity is has been made selective for the absorption of electromagnetic solar radiation by means of a multi-layer metallisation called "CERMET," created using completely recyclable products. The absorption unit is made up of a copper, U-curved circuit, positioned in contact with special aluminium heat absorbers that increase the heat transfer surface. Each unit is enclosed in a glass tube and then connected parallel to a distribution collector that collects the vector fluid flowing from each circuit. The copper distribution collector is protected by an electrocoloured aluminium structure, fully insulated with special class 0 (ISO-DIS 1182.2) fireproof, water-repellent and low biopersistent insulation.
Dimensions
110 1140
0,6
Efficiency
0,5
[]
0,4
0,3
0,2
1480 1538 1610
0,1
0,02
0,04
0,06
0,08
0,1
Load loss
1800
1600
1400
400
200
Vacuum tube
External glass tube Internal glass tube Absorber Copper circuit
47 mm 33 mm
Techtile Therm tile body Techtile Therm protection slides Collector complete with vacuum tubes M/M 1/2 junction for hydraulic connection
Power curve
400 Absorption (G*=1000 W/m2) Opening Overall
* = extra components are supplied to facilitate operation of all possible situations during installation ** = the collector is supplied without vector fluid
Garanzia
Techtile Therm garantito per i difetti di costruzione per un periodo di 5 anni.
Technical specifications
N of tubes External vacuum tube diam. Collector connections Performance (0) Heat loss coefficient (a1) Heat loss coefficient (a2) Max operating pressure Optimal flow Liquid content Overall surface Opening surface Absorption surface mm mm % W/m2K W/m2K2 bar l/min m2 l m2 m2 m2 6 47 14 0,4 0,8 0,07 6 0,8 8,8 2 0,85 0,46
200
100 0 - 100
- 200
10
20
30
40
50
60
System installation
System setup
Techtile Therm is a system composed of tiles and a solar collector that must be positioned on a roof pre-set with Techtile Basic. Techtile Basic disponibile sia in elementi singoli che preassemblati in pannelli. The "pre-assembled panel" solution allows fast construction of thermal and noise insulated and ventilated covering. Both the roof covering and the energy system base are created at the same time with Techtile Basic.
Collegamenti idraulici
Il collegamento idraulico di Techtile Therm agli accessori del vano tecnico si effettua come quello di un tradizionale impianto solare termico.
un prodotto
REM S.p.A via A. Volta, 54 30020 Noventa di Piave (VE) Italy tel. 0421.307622 fax: 0421.308804 www.remenergies.it info@remenergies.it
Rem, with the Techtile project, has gained the recognition of important organizations and national and international institutions:
The illustrations and the data reported here are indicative. Rem S.p.A. reserves the right to make any changes it deems necessary without prior notice.
P-studio.it