Professional Documents
Culture Documents
05 Genex Assistant Wcdma (Ver2.3)
05 Genex Assistant Wcdma (Ver2.3)
www.huawei.com
1
Huawei confidential, 2010-05
www.huawei.com
2
Huawei confidential, 2010-05
Contents
Functions and Features of the GENEX Assistant Basic Features Special Features of the HSDPA Special Features of the HSUPA Cases
www.huawei.com
3
Huawei confidential, 2010-05
Functions:
Decreasing the technical requirements for optimization engineers and improving work efficiency Quickly optimizing the network, thus helping to shorten the project period, and reduce the cost of human power and time Finding potential network problems in time Exporting analysis results according to standards and providing accurate evaluation Helping to back up or archive projects and cases
www.huawei.com
4
Huawei confidential, 2010-05
www.huawei.com
5
Huawei confidential, 2010-05
WCDMA DT report, WCDMA KPI report, WCDMA delay report, WCDMA call analysis report, WCDMA application
layer analysis report, GSM analysis report, and so on. All types of reports in the GENEX Assistant are integrated into the GENEX Assistant intelligent report system.
www.huawei.com
6
Huawei confidential, 2010-05
www.huawei.com
7
Huawei confidential, 2010-05
Analysis Report
Scanner neighboring cell analysis report, comparison and analysis report of the UE CPICH measurement results before a call end or before and after a call drop, UE soft handover performance analysis report, and so on
WCDMA Scanner neighboring cell list
CPICH measurement results before a call end or before and after a call drop WCDMA UE inter-frequency handover success rate
www.huawei.com
8
Huawei confidential, 2010-05
www.huawei.com
9
Huawei confidential, 2010-05
Select a technology.
www.huawei.com
10
Huawei confidential, 2010-05
WCDMA KPI settings, including: 1. EC/IO and RSCP thresholds of coverage 2. PDP activation success rate Set to the RRC request statistics mode or the PDP request statistics mode. 3. Whether to display PS data service events and KPIs. By default, they are not displayed.
www.huawei.com
11
Huawei confidential, 2010-05
www.huawei.com
12
Huawei confidential, 2010-05
www.huawei.com
13
Huawei confidential, 2010-05
Precautions for Data Analysis Through the GENEX Probe and GENEX Assistant
Before the analysis, obtain the test files from the related owner and check the test records to know the general details of the test. The version of the GENEX Assistant must be the latest. If you are not sure whether the version is the latest, contact the project leader. Auto combination and UE combination can be used for the data import of the GENEX Assistant. Pay attention to the differences between the two combinations. Currently, the Auto combination is recommended. The differences between the two combinations are as follows:
Auto combination 1. This combination is applicable to the case that multiple files are divided during a drive test. 2. Each UE is used for testing the same service. 3 . Time overlapping cannot occur in data. Events are judged according to signaling. Therefore, if time overlapping occurs in the data, calls overlap with each other and the events are misjudged. UE combination If time overlapping does not occur in two UEs and the time difference is greater than 10 seconds, the events of the UEs are accumulated but not re-judged. If time overlapping occurs in two UEs, the time of the latter UE is offset by one day so that the time overlapping can be avoided. If the IMSIs of two UEs are different, the events of the UEs are accumulated but not re-judged.
www.huawei.com
14
Huawei confidential, 2010-05
Precautions for Data Analysis Through the GENEX Probe and GENEX Assistant
The GENEX Assistant can perform all the chart statistical functions and analyze problems. Analysis engineers need to be familiar with the signaling process. Moreover, the GENEX Assistant can replay data. The GENEX Probe is used for foreground tests, and the GENEX Assistant is used for background analysis. By using the GENEX Probe, you can collect statistics and provide charts and reports. If you need to observe more indexes for locating a certain problem, you can use the GENEX Probe to replay data. Currently, the software version is updated frequently. Therefore, it is suggested that you start the GENEX Probe during the replay and choose Configuration > System Configuration > Others > Event Re-judge to re-judge data events. Pay more attention to the replay of earlier data.
www.huawei.com
15
Huawei confidential, 2010-05
Setting Datasets
Four binning modes:
No binning Distance binning Grid binning: groups the measurement results by grid, and selects the central part of the grid. Time binning: averages the measurement data collected within a period of time by time interval.
Data dispersing:
Disperses the data. In the case of bus stop in a drive test, test data is concentrated on one point. The GENEX Assistant disperses the data collected during bus stop into the data collected several seconds before the bus starts off. In this way, the data can be evenly displayed on the map.
www.huawei.com
16
Huawei confidential, 2010-05
Data Binning
You need to select special data processing methods for different scenarios. Data binning can effectively reduce the affects brought by fast fading.
No Binning No binning is based on the analysis of original test data. In general, no binning applies to the synchronous analysis of events and signaling. Advantage: You can locate each event and signaling, and solve the problem. Disadvantages: You need to process a large amount of data. The original test data is distributed in a non-coherent way.
www.huawei.com
17
Huawei confidential, 2010-05
Data Binning
Distance Binning
Distance binning is usually used to analyze drive test data, and can also be used to quickly process the CW test data and analyze the network coverage. Advantages: Distance binning samples data by equidistance on the unidirectional route. Distance binning avoids congregation of sampling points. The point congregation can be caused by long time stops, for example, the car stops caused by traffic stop signals. Distance binning is of high efficiency. Disadvantage: Distance binning is not applicable to repeated routes. There are various kinds of repeated routes, for example, the route in the scenario of crossing a bridge. Example of distance binning: compares the average data before and after the distance binning which takes 5 meters as interval. The prerequisite for distance binning is that the vehicle cannot be in high speed.
5 meter
www.huawei.com
18
Huawei confidential, 2010-05
Data Binning
Grid Binning
Grid binning effectively complements the geographic binning mode by being applied to repeated routes. Advantages: Grid binning can be used to perform geographic binning on repeated routes. Grid binning avoids congregation of sampling points caused by long time stops. For example, the car stops because of traffic stop signals. Grid binning is of high efficiency. Disadvantages: Time delays occurs on the repeated routes. The size of the grid cannot be too large. Example of data binning: compares the average data before and after the grid binning which takes 5 meters * 5 meters as a grid.
5m x 5m
www.huawei.com
19
Huawei confidential, 2010-05
Data Binning
Time Binning
Time binning requires that the vehicle runs at a stable rate and can be used to analyze special KPIs within a continuous period. Advantages: Time binning is used to analyze the data that is tested at a stable rate. Time binning samples the maximum or minimum data by using a predefined interval within a continuous period, and analyzes some special KPIs. Time binning is of high efficiency. Disadvantage: If the vehicle runs at an unstable rate during testing, the intervals of test data cannot be the same. Example of time binning: compares the average data before and after the time binning which takes 1 second as interval.
High speed
1 second
Low speed
www.huawei.com
20
Huawei confidential, 2010-05
Data Binning
Time Binning
For example, to learn the BLERs in some intervals, you need to: 1. Set Binning Param Time Span (s) to four. 2. Set Value Fetch to Min Value. The table below shows that the minimum BLER value within four seconds is greater than 5%. In this case, you can infer that problems may occur during data transmission.
The minimum BLER value within four seconds is greater than 5%.
www.huawei.com
21
Huawei confidential, 2010-05
The GENEX Assistant can analyze the network of the LTE, WCDMA, HSDPA, HSUPA, GSM, GPRS, EDGE, CDMA and WiMAX. www.huawei.com
22
Huawei confidential, 2010-05
www.huawei.com
23
Huawei confidential, 2010-05
Displaying Test Data in the Format of Chart or Table Displaying Data in the Format of Chart
The GENEX Assistant supports the following types of charts:
Time chart PDF chart CDF chart Double-axis chart Pie chart
www.huawei.com
24
Huawei confidential, 2010-05
Multi-Window Co-Activation
This function can be used to simultaneously display the relevant information in multiple windows, thus helping to quickly query the event and the information related.
www.huawei.com
25
Huawei confidential, 2010-05
www.huawei.com
26
Huawei confidential, 2010-05
After
Filtering by Time
Filtering by time is used to identify repeated routes.
www.huawei.com
27
Huawei confidential, 2010-05
Before filtering
After filtering
After filtering
www.huawei.com
28
Huawei confidential, 2010-05
www.huawei.com
29
Huawei confidential, 2010-05
Customizing Legend
Customizing IE legends
www.huawei.com
30
Huawei confidential, 2010-05
Word Collector
The data in a chart or table in the GENEX Assistant can be directly exported in .doc format by using the Word Collector.
www.huawei.com
31
Huawei confidential, 2010-05
Analyzing Indexes
Selecting the items to be analyzed under the indicator node
Each indicator can be geographically displayed in the data table, pie chart, bar chart, chart, or on the map.
www.huawei.com
32
Huawei confidential, 2010-05
The GENEX Assistant also supports the CIO settings to ensure that the simulation is more like the actual network.
For details, see "Case1. Analyzing Pilot Pollution Problem" and "Case2. Handover Event simulation by Scanner Data."
www.huawei.com
33
Huawei confidential, 2010-05
Compare the predication result and the actual measurement result plus the offset.
www.huawei.com
34
Huawei confidential, 2010-05
Uplink data
www.huawei.com
35
Huawei confidential, 2010-05
www.huawei.com
36
Huawei confidential, 2010-05
Contents
Functions and Features of the GENEX Assistant Basic Features Special Features of the HSDPA Special Features of the HSUPA Cases
www.huawei.com
37
Huawei confidential, 2010-05
www.huawei.com
38
Huawei confidential, 2010-05
Rate statistics
MAC Layer Rate (Delta) DSCH SBLER (Delta) SCCH Success Rate (Delta) Channel quality HS-DPCCH CQI HS-DSCH Retrans Rate (Delta) HS-PDSCH Codes
www.huawei.com
39
Huawei confidential, 2010-05
By each TBS
www.huawei.com
40
Huawei confidential, 2010-05
Description
Indicates the transport block size. Each frame transmits only one TB
www.huawei.com
41
Huawei confidential, 2010-05
Contents
Functions and Features of the GENEX Assistant Basic Features Special Features of the HSDPA Special Features of the HSUPA Cases
www.huawei.com
42
Huawei confidential, 2010-05
www.huawei.com
43
Huawei confidential, 2010-05
www.huawei.com
44
Huawei confidential, 2010-05
www.huawei.com
45
Huawei confidential, 2007-06