Professional Documents
Culture Documents
7050
7050
Material Notes:
Data points with the AA note have been provided by the Aluminum Association, Inc. and are NOT FOR DESIGN. Physical Properties Density Metric 2.83g/cc Mechanical Properties English 0.102lb/in Comments
AA; Typical
Hardness, Brinell Hardness, Knoop Hardness, Rockwell A Hardness, Rockwell B Hardness, Vickers Ultimate Tensile Strength Tensile Yield Strength Elongation at Break Modulus of Elasticity Poisson's Ratio Fracture Toughness Fracture Toughness Fracture Toughness Shear Modulus Shear Strength
140 177 51,60 84 162 524MPa 469MPa 11% 71.7GPa 0.33 28MPa-m 31MPa-m 35MPa-m 26.9GPa 303MPa Electrical Properties
140 177 51,60 84 162 76000psi 68000psi 11% 10400ksi 0.33 25.5ksi-in 28.2ksi-in 31.9ksi-in 3900ksi 44000psi
500 kg load with 10 mm ball. Calculated value. Converted from Brinell Hardness Value Converted from Brinell Hardness Value Converted from Brinell Hardness Value Converted from Brinell Hardness Value AA; Typical AA; Typical AA; Typical; 1/2 in. (12.7 mm) Diameter AA; Typical; Average of tension and
compression. Compression modulus is about 2% greater than tensile modulus.
K(IC) in S-L Direction K(IC) in T-L Direction K(IC) in L-T Direction AA; Typical
Electrical Resistivity
4.3e-006ohm-cm
CTE, linear 68F CTE, linear 250C Specific Heat Capacity Thermal Conductivity Melting Point Solidus Liquidus
23m/m-C 25.4m/m-C 0.86J/g-C 157W/m-K 488 - 629C 488C 629C Processing Properties
AA; Typical; Average over 68-212F range. Average over the range 20-300C
AA; Typical range based on typical composition for wrought products 1/4 inch thickness or greater AA; Typical AA; Typical