Professional Documents
Culture Documents
Tinta Inkjet Basis Air
Tinta Inkjet Basis Air
www.duraposita.com
duraposita@yahoo.co.id
duraposita@gmail.com
Daftar isi
Sejarah printing inkjet
Komponen inkjet ink
Daftar pustaka
Komponen inkjet ink
Komponen utama
Komponen pendukung
Komponen tambahan
Komponen utama
Air
Surfactant
Resin
Biocidesatau fungicides
Buffering agent
Komponen tambahan
Antioksidant
Dispersant
Chelating agent
Corosion inhibitor
Ultraviolet absorber
Viscosity adjuster
Defoaming agent
Manufaktur inkjet ink
Model formula inkjet ink
Persiapan produksi
Diagram produksi
Model formula inkjet ink
Water-Based Ink Jet Ink formulation
Ingredients Amount Function
Water 50%-90% Ink Solvent
Colorant 1%-15% Color Source
Co-Solvent or Humectant 2%-20% Ink vehicle, prevents evaporation
Fixative or Penetrant 0%-10% Assist fixing the ink to the substrate
Surfactant 0.1%-6% Surface tension and wetting
Resin 0.2%-10% Durability and adhesion
Biocide 0.02%-0.4% Prevents bacterial growth
Fungicide 0.01%-0.4% Prevents fungal growth
Buffering Agent 0.05%-1% Control ink pH level
Other 0.01%-1% Controls ink specific characteristics
Persiapan produksi
Dye based ink, melarutkan sejumlah dye dalam air, dan
diikuti cosolvent, humectant sampai sampai bahan
terakhir. Bila perlu temperatur naik maka berikan
pemanasan.
Pigment based ink, pigment tidak dapat larut dalam air,
dilakukan dengan dispersi dan mixing pigmen dengan
high speed dispersing, homogenising dan milling ( ball
mill, sand mill, roll mill, agitator mill, henshell mixer,
colloid mill) sampai terbentuk dispersi pigmen yang
homogen dalam air.
Diagram produksi
Spesifikasi dan standard
Standarkostumer
Standar umum
Standar kostumer
1. High ecological standards (safe use)
2. High color strength and good solubility or dispersibility in aqueous inks
3. High brilliancy
4. High surface tension
5. Low viscosity
6. Extremely low content of chloride and sulfate (low corrosion)
7. Ion content in the ppm range for Ca, Mg and Fe (low precipitation)
8. No heavy metals (complying with standard EN71/3 for toys)
9. High temperature stability (for thermal ink jet and bubble jet)
10. High light stability
11. Very good filtering properties (good for stable, long-lasting inks)
12. Registration on all key markets
Standar spesifikasi Inkjet Specifications
Equipment used in conducting the following test:
Surface tension Tensiometer with 6 cm ring
Viscosity Brookfield Model LVT with UL
Adapter 72 degree temperature.
pH PHEP #3 ATC Meter
Color Draw Downs Leneta #806 draw down meter
CYAN
pH 7.0 - 8.0
Surface Tension 34 / 40 Dynes
Viscosity 1.7 - 2.0
MAGENTA
pH 7.0 - 8.0
Surface Tension 34 / 40 Dynes
Viscosity 1.7 - 2.0
YELLOW
pH 7.0 - 8.0
Surface Tension 34 / 40 Dynes
Viscosity 1.7 - 2.0
BLACK
pH 7.0 - 8.0
Surface Tension 34 / 40 Dynes
Viscosity 1.7 - 2.0
LIGHT CYAN
pH 7.0 - 8.0
Surface Tension 34 / 40 Dynes
Viscosity 1.7 - 2.0
LIGHT MAGENTA
pH 7.0 - 8.0
Surface Tension 34 / 40 Dynes
Viscosity 1.7 - 2.0
Quality control equipment
PH meter
Viscousity meter
Conductivity meter
Daftar pustaka
1. Preservation of inkjet hardcopies, martin c jurgen, rochester institute of technology.
2. Stability issues and test methode for inkjet materials, barbara vogt, university of applied scince
cologne.
3. Studies on fastness properties of ink jet prints on coated papers, katri vikman, helsinki university
of technology
4. Waterbased inkjet inks, Agus tri widodo, duraposita chem.
5. Inkjet formulation – the art of color chemistry, mike andreottola, american inkjet corporation.
6. www.cabot.corp.com
7. www.basf.com
8. www.clariant.com
9. www.lexmark.com
10. www.canon.com
11. www.epson.com
12. www.hp.com
13. www.rohmhaas.com