Professional Documents
Culture Documents
Configuring Linksys Wireless Router: Prof. Yousif at Valencia Community College
Configuring Linksys Wireless Router: Prof. Yousif at Valencia Community College
Main Issues
Physical Connection Interfacing with the broad band Modem (cable, DSL) Adjusting the configuration on the broad band Modem and upgrading the modem firmware. Basic router setup
Accessing the Web Interface Upgrading the router firmware Admin account IP addresses
2
Main Issues
Wireless Setup
SSID Channel Security MAC Filter
Must be the cable that came with your modem (it is crossover in case of DSL)
Router
Tech Support Search by answer ID for any of those issues
Setting up PPPoE DSL with a BEFW11S4: Answer ID 527
Firmware Version
Routers IP Address Help Take a note of the DNS Server Addresses Disable DHCP, It is safer to use Static IPs
9
Save
11
Universal Plug and Play has to be enabled for some applications (MS Messenger audio and video for example) to work
12
Browse to where you have downloaded the router firmware from the vendor web site
13
Visit the manufacture web site, go to the tech support page and download the dirver Install the driver This insures that you will be able to configure the latest security features
14
Enable the radio interface, configure the SSID and disable SSID Broadcasting
15
Make sure that you right down the automatically generated 26 hex digits key. The 16 hex key will be used later to configure the wireless clients
Stronger Encryption
17
MAC Authentication
To get the MAC address of your Wireless card, Go to DOS and type ipconfig /all
18
19
20
21
22
23
Choose
Must download and install the log viewer application from Linksys web site
24
Log Viewer
You can also open the log file in MS Word
25
WEP
27
WPA
28
XP Firewall
Troubleshooting Windows Firewall in Microsoft Windows XP Service Pack 2 The document includes detailed explanation of how to use the following Windows Firewall Troubleshooting Tools:
Netsh firewall commands Windows firewall logging files The netstat tool
Most of the firewall configuration can also be done from the CLI. Example:
>netsh firewall set port opening TCP 80 disable
29