Professional Documents
Culture Documents
Weld - Design - Symbols
Weld - Design - Symbols
Weld - Design - Symbols
U Groove weld
J Groove weld
Reference Line must always be horizontal, Arrow points to the line or lines on drawing which clearly identify the proposed joint or weld area.
Arrow
Tail
The tail of the welding symbol is used to indicate the welding or cutting processes, as well as the welding specification, procedures, or the supplementary information to be used in making the weld.
Finish Symbol
F A
Depth of bevel
L-P
ARROW SIDE
FIELD/SITE WELD
(N)
Number of spot, seam, stud, plug, slot, or projection welds
TYPE OF WELD
Bead Fillet Plug or Slot Groove Square V Bevel U J
Backing Weld
Seam Weld
Surfacing
SUPPLEMENTARY SYMBOL
WELD ALL AROUND FIELD WELD
FLUSH
CONTOUR
CONVEX CONCAVE
SUPPLEMENTARY SYMBOLS
M
Toes blended smoothly
Permanent Backing Strip
MR
Removable Backing Strip
SUPPLEMENTARY SYMBOLS
Peripheral Welds
SUPPLEMENTARY SYMBOLS
Site welds
SUPPLEMENTARY SYMBOLS
(Tail Optional)
Filler Materials (as per ISO 544 or ISO 2560 or ISO 3581)
EXAMPLES OF APPLICATION
Method of representation
Arrow Line
Weld Joint
EXAMPLES OF APPLICATION
Welding on the Arrow Side
Arrow Side
Other Side
EXAMPLES OF APPLICATION
Welding on the Other Side
Arrow Side
Other Side
EXAMPLES OF APPLICATION
Welding on the Other Side Arrow Side
Other Side
EXAMPLES OF APPLICATION
Welding on the Arrow Side
Other Side
Arrow Side
EXAMPLES OF APPLICATION
Which is the Other Side in this case? Side B Side A
Side C
Side D
EXAMPLES OF APPLICATION
Welding on both Sides
Arrow Side
Other Side
EXAMPLES OF APPLICATION
Symmetric Welding on both Sides
EXAMPLES OF APPLICATION
Pointing of Arrows for Bevel and J Joints
OR
EXAMPLES OF APPLICATION
Pointing of Arrows for Bevel and J Joints
DIMENSIONING OF WELDS
Butt Joints
DIMENSIONING OF WELDS
Fillet Welds
z5
5 5
a5
l
5
DIMENSIONING OF WELDS
Fillet Welds
DIMENSIONING OF WELDS
Intermittent Fillet Welds
n x l (e)
n x l (e)
(e)
(e)
DIMENSIONING OF WELDS
Staggered Intermittent Fillet Welds
n x l (e)
n x l (e)
(e)
l (e)
(e) (e)
DIMENSIONING OF WELDS
Spot Weld d n (e)
e d
DIMENSIONING OF WELDS
Slot Weld d n x l (e)
e d
DIMENSIONING OF WELDS
Seam Weld d n x l (e)
e d
DIMENSIONING OF WELDS
Plug Weld d n (e)
e d
Reference Line must always be horizontal, Arrow points to the line or lines on drawing which clearly identify the proposed joint or weld area.
Arrow
Tail
The tail of the welding symbol is used to indicate the welding or cutting processes, as well as the welding specification, procedures, or the supplementary information to be used in making the weld.
A flag at the tangent of the reference line and arrow means Field Weld.
Break in arrow means arrow side must be side that beveling or other preparation required.
1/4 1/4
1/4 (5/16)
Depth of penetration
5/16
5/16
1/4 1/4
2-10 2-10
10 in
1/4 1/4
2-10 2-10 10 in
10 in
The End
3G
2G 4G
5G
6G
45
4F
5F