Professional Documents
Culture Documents
Class - 3 Introduction To Staad (29th Oct 2012)
Class - 3 Introduction To Staad (29th Oct 2012)
Starting the Program Creating Joints and Members Switching On Node and Beam Labels Specifying Member Properties and Material Constants Specifying Member Orientation using Beta Angle Specifying Supports Specifying Loads Specifying the Analysis Type Specifying the parameters and instructions for 2 Concrete Design Performing Analysis and Design
4/18/2013
4/18/2013
4/18/2013
4/18/2013
4/18/2013
4/18/2013
4/18/2013
4/18/2013
10
4/18/2013
11
4/18/2013
ALTERNATIVELY, ONE MAY SELECT THE TOOLS | SET CURRENT INPUT UNIT MENU OPTION.
12
4/18/2013
13
4/18/2013
14
4/18/2013
15
4/18/2013
SPECIFYING SUPPORTS
16
4/18/2013
SPECIFYING LOADS
17
4/18/2013
18
4/18/2013
19
4/18/2013
20
4/18/2013
21
4/18/2013
22
4/18/2013
23
4/18/2013
24
4/18/2013
25
4/18/2013
26
4/18/2013
27
4/18/2013
28
4/18/2013
29
4/18/2013
30
4/18/2013
31
4/18/2013
POST-PROCESSING
Display deflection diagrams Annotate Displacements Change the Display units for displacement values shown in the tables. Switching between load cases for viewing deflection diagrams. Display the force and moment diagrams. Changing the degree of freedom for which the force/moment diagram is plotted Annotating the force diagram Changing the Display units for the force and moment values shown in the tables. Restricting the load cases for which results are viewed Using Member Query 32 Viewing Concrete Design results using Query. Producing an on-screen report
4/18/2013
33
4/18/2013
34
4/18/2013
35
4/18/2013
END
36
4/18/2013