Professional Documents
Culture Documents
Project Review-1
Project Review-1
TITLES
OBJECTIVE BLOCK DIAGRAM HARDARE REQUIREMENTS PROJECT DESCRIPTION SOFTWARE EXPLANATION APPLICATIONS CONCLUSION
OBJECTIVE:
The main objective of this project is to develop an
BLOCK DIAGRAM :
RFID reader Lcd 16*2 Max232 MICROCONTROLLER AT89S52 Fingerprint Modu;le Voice board
RPS
EEROM
Crystal
MAX232:
MAX232 is used to convert TTL logic into 0/1
logic and vice versa.So it is placed between Microcontroller and Serial Port for convertion.
MAX232 is compatible with RS-232 standard, and
consists of dual transceiver. Each receiver converts TIA/EIA-232-E levels into 5V TTL/CMOS levels.
Each driver converts TTL/COMS levels into
TIA/EIA-232-E levels
FEATURES OF MAX232:
Input voltage levels are compatible with standard
MOS levels Output voltage levels are compatible with EIA/TIA-232-E levels Single Supply voltage: 5V Low input current: 0.1A at A= 25 Output current: 24mALatching current not less than 450mA at A= 25 The transmitter outputs and receiver inputs are protected to +/-15kV Air ESD
EEPROM:
MEMORY ORGANIZATION: AT24C04, 4K SERIAL EEPROM: Internally organized with 32 pages of 16 bytes each, the 4K requires a 9-bit data word address for random word addressing.
HARDWARE REQUIREMENTS:
AT89S52 based our developed tool
Power supply
RFID cards EEROM
Keypad
LCD Voice board with speaker
mode. in this project LCD is connected in 4-bit mode the interface connections of LCD with microcontroller are as follows
RS of LCD is connected to p0.0 of microcontroller EN of LCD is connected to p0.1 of microcontroller D4 of LCD is connected to p0.4 of microcontroller D5 of LCD is connected to p0.5 of microcontroller D6 of LCD is connected to p0.6 of microcontroller D7 of LCD is connected to p0.7 of microcontroller
PROJECT DESCRIPTION:
Embedded system board attached with a RFID card reader and cards will be given to some particular persons can be used. This card is mainly used their personal identification. Our project has to speak out the name of person while he shows card. It can be be used by them anywhere.
SOFTWARE OPERTION:
Embedded c program using KEIL C
COMPILER
RFID to write code Run software
APPLICATIONS:
Employ time Book tracking in libries Personal tracking in hospitals Protect tracking in product assembly Banking opertions
CONCLUSION:
The proposed system based on Atmel
(Atmel microcontroller) used this HUMAN RECONGITION USING RFID TECHNOLGY AND STREOVISIONsystem is fully software controlled with less hardware circuit.
REFERENCES
1. The 8051 micro controller and embedded
systems by Mazidi. 2. www.wikipedia.org 3. WWW.atmel.com 4. www.8051projects.com 5. Embedded systems with 8051 by kenith j ayala
THANK YOU..