Professional Documents
Culture Documents
3g Tems Drive Test
3g Tems Drive Test
3g Tems Drive Test
1
3G DRIVE TEST TOOL
Contents
TEAM SOFTWAR INSTALLATION KIT CONFIGRATION (Phone ,GPS) DRIVE TEST PARAMETER
BTS
STEPS FOR INSTALLING TEMS 9.1 SOFTWARE :1 -First install .Net 3 and .net 3.5 in your PC:-
3- After installing TEMS, install the driver of Dongle, Mobile phone, and GPS Beffo cable by connecting the equipment in different ports.
Dongle driver is automatically install in your PC just when you connect in your PC.
But for Mobile and Beffo cable driver, you have to give the path of the driver.
4-After installing device drivers, Copy and Paste above patch files in C:\Program Files\Ericsson\TEMS Products\TEMS Investigation\Application Folder. 5-Now open the TEMS window from. My Documents\TEMS Product Files\TEMS Investigation 9.1\Workspaces. In workspaces folder you have to open Investigation WCDMA GSM.
STEP 3 FOR PORT DEFINE:3 .Step Save It 2.Step Select MS 1. Step Select it
Go to command sequence
EDIT(CTRL+E)
2. STEPTEST NUMBER
FILE NAME
SAVE PATH
IP ADDRESS
User name
password
RUN
4.PASSWORD
RUN
Open Map
Layer Control
This windows shows the Serving cell & Neighbors AS : Active Set MN: Monitered Neighbors DN: Dominant Neighbors
FOR VOICE CALL LAYER 3 MESSAGES :THIS WINDOW OPEN GO TO PRESENTATION--- SIGNALING---LAYER 3 MESSAGES
FOR VOICE CALL EVENT COUNTER WINDOW :THIS WINDOW OPEN GO TO ANALYSIS----EVENT COUNT
HSDPA ANALYSIS
FOR HSDPA TESTING IN WCDMA :THIS WINDOW OPEN GO TO PRESENTATION---WCDMADATA SERVICEHSDPA ANALYSIS
HSUPA ANALYSIS
FOR WCDMA HSUPA TESTING :THIS WINDOW OPEN GO TO PRESENTATION-WCDMADATA SERVICE HSUPA ANALYSIS
HOW TO GENRATE MAP-INFO FILE WITH TEMS HELP :1. STEP GO TO TOOLBAR LOGFILE ----- EXPORT LOGFILE
Setup open
1 Select it
2 Add It
START IT
OPEN TEMS
LOGFILE WINDOW
REPORT GENERATOR
PROPERTIES FINIES
ADD LOGFLIE
2.Select ok
1 .Select It
Also one Power Switch is in RET Unit. Upper press is ON & Down Press is OFF
WCDMA SPECIFICATIONS
SPECTRUM UMTS
End of Section