Professional Documents
Culture Documents
Chapter 9
Chapter 9
Chapter 9
Production Isoquants
• In the long run, all inputs are variable
& isoquants are used to study
production decisions
• An isoquant is a curve showing all possible
input combinations capable of producing a
given level of output
• Isoquants are downward sloping; if
greater amounts of labor are used, less
capital is required to produce a given
output
2 McGraw-Hill/Irwin
3 Managerial Economics
3 McGraw-Hill/Irwin
4 Managerial Economics
Marginal Rate of Technical
Substitution
• The MRTS is the slope of an isoquant
& measures the rate at which the two
inputs can be substituted for one
another while maintaining a constant
level of output
∆K
MRTS = −
∆L
The minus sign is added to make MRTS a positive
number since ∆K ∆L , the slope of the isoquant, is
negative
4 McGraw-Hill/Irwin
5 Managerial Economics
Marginal Rate of Technical
Substitution
• The MRTS can also be expressed as
the ratio of two marginal products:
MPL
MRTS =
MPK
As labor is substituted for capital, MPL declines &
MPK rises causing MRTS to diminish
∆K MPL
MRTS = − =
∆L MPK
5 McGraw-Hill/Irwin
6 Managerial Economics
Isocost Curves
• Show various combinations of inputs that
may be purchased for given level of
expenditure ( C ) at given input prices ( w , r )
C w
K= − L
r r
• Slope of an isocost curve is the negative
of the input price ratio ( − w r )
• K -intercept is C r
• Represents amount of capital that may be purchased if zero
labor is purchased
6 McGraw-Hill/Irwin
7 Managerial Economics
7 McGraw-Hill/Irwin
8 Managerial Economics
8 McGraw-Hill/Irwin
9 Managerial Economics
Example
• Quantity to be produced 10,000
units
• Cost of labour w = Rs. 40 per unit
• Cost of capital r = Rs. 60 per unit
10 McGraw-Hill/Irwin
11 Managerial Economics
11 McGraw-Hill/Irwin
12 Managerial Economics
Example
• 3 isoquant curves – 500, 700, 900
• Capital cost r = Rs. 20 / unit
• Labour cost w = Rs. 10 / unit
12 McGraw-Hill/Irwin
13 Managerial Economics
13 McGraw-Hill/Irwin
14 Managerial Economics
Returns to Scale
f(cL, cK) = zQ
• If all inputs are increased by a factor of c &
output goes up by a factor of z then, in
general, a producer experiences:
• Increasing returns to scale if z > c; output goes up
proportionately more than the increase in input
usage
• Decreasing returns to scale if z < c; output goes up
proportionately less than the increase in input usage
• Constant returns to scale if z = c; output goes up by
the same proportion as the increase in input usage
14 McGraw-Hill/Irwin
15 Managerial Economics
Long-Run Costs
• Long-run total cost (LTC) for a
given level of output is given by:
LTC = wL* + rK*
Where w & r are prices of labor & capital,
respectively, & (L*, K*) is the input
combination on the expansion path that
minimizes the total cost of producing that
output
15 McGraw-Hill/Irwin
16 Managerial Economics
Long-Run Costs
• Long-run average cost (LAC) measures the
cost per unit of output when production
can be adjusted so that the optimal
amount of each input is employed
• LAC is U-shaped
• Falling LAC indicates economies of scale
• Rising LAC indicates diseconomies of scale
LTC
LAC =
Q
16 McGraw-Hill/Irwin
17 Managerial Economics
Long-Run Costs
• Long-run marginal cost (LMC) measures
the rate of change in long-run total cost as
output changes along expansion path
• LMC is U-shaped
• LMC lies below LAC when LAC is falling
• LMC lies above LAC when LAC is rising
• LMC = LAC at the minimum value of LAC
∆LTC
LMC =
∆Q
17 McGraw-Hill/Irwin
18 Managerial Economics
Derivation of a Long-Run Cost
Schedule (Table 9.1)
Least-cost
combination of
19 McGraw-Hill/Irwin
20 Managerial Economics
Long-Run Average & Marginal
Cost Curves (Figure 9.10)
20 McGraw-Hill/Irwin
21 Managerial Economics
Various Shapes of LAC
(Figure 9.11)
21 McGraw-Hill/Irwin
22 Managerial Economics
22 McGraw-Hill/Irwin
23 Managerial Economics
Constant Long-Run Costs
(Figure 9.12)
23 McGraw-Hill/Irwin
24 Managerial Economics
Economies of Scope
• Exist for a multi-product firm when the
joint cost of producing two or more goods
is less than the sum of the separate costs
of producing the two goods
• For two goods, X & Y, economies of scope
are measured by:
C( X ) + C(Y ) − C( X ,Y )
SC =
C( X ,Y )
Where SC is greater than zero when economies of scope
exist & SC is less than zero with diseconomies of scope
24 McGraw-Hill/Irwin
25 Managerial Economics
Relations Between Short-Run &
Long-Run Costs
• LMC intersects LAC when the latter is at its
minimum point
• At each output where a particular ATC is
tangent to LAC, the relevant SMC = LMC
• For all ATC curves, point of tangency with
LAC is at an output less (greater) than the
output of minimum ATC if the tangency is
at an output less (greater) than that
associated with minimum LAC
25 McGraw-Hill/Irwin
26 Managerial Economics
Long-Run Average Cost as the
Planning Horizon (Figure 9.13)
26 McGraw-Hill/Irwin
27 Managerial Economics
27 McGraw-Hill/Irwin
28 Managerial Economics
28 McGraw-Hill/Irwin
29 Managerial Economics
Restructuring Short-Run Costs
(Figure 9.14)
29 McGraw-Hill/Irwin