Professional Documents
Culture Documents
Smart Greenhouse
Smart Greenhouse
T H E S M A RT G R E E N H O U S E
ARDUINO INTELLIGENCE
INTERNAL GUIDE:MR.SATISH B BASAPUR
BY:KEERTHAN.V
ASST.PROFESSOR 1DA11IS012
CONTENTS
Introduction
What is green house?
Automated green house
Sensors
Software
Advantages
Conclusion
INTRODUCTION
What is a Greenhouse?
AUTOMATED GREENHOUSE
Greenhouses form an important part of the agriculture and
horticulture sectors of a country.
WHAT IS ARDUINO ?
ARDUINO
open-source electronics prototyping platform/environment .
The Arduino is built for designers and artistspeople with
little technical expertise.
PROGRAMMING ENVIRONMENT
The Arduino Uno can be programmed with the Arduino software
IDE .
ARDUINO IDE
ADVANTAGES OF ARDUINO
Huge documentation and support
Larger library collection
Open source
Simplified and user-friendly programming language
No additional programmer/burner hardware required for programming board
Highly Portable
Low power consumption
Highly customizable
BENEFITS
Automatically control environmental conditions within
FEATURES
Detect and maintain temperatures from -40C to 125C.
Detect and maintain humidity levels between 5% RH and
95% RH
OBJECTIVE
FUNCTIONS
Lower Temperature: 1 Cooling Fan
Raise temperature: Heater (indicated by Bulb for
demonstration purposes)
SYSTEM OVERVIEW
Temperature
sensor
Humidity sensor
Moisture Sensor
Ambient Light
Sensor
Senso
rs
Ardui
no
ATmega8
I/O Ports
Heater/Fan
Exhaust Fan
Fluorescent
Light-bulb
Water Pump
Internet
LCD
Devic
es
into Arduino
Based on input values, Arduino outputs
HARDWARE
ARDUINO MICROCONTROLLER
ETHERNET SHIELD
LCD DISPLAY
SENSORS
FANS AND RELAYS
WATER PUMP
ETHERNET SHIELD
The Arduino Ethernet shield allows an Arduino board to connect to
the internet using the Ethernet library and to read and write an SD
card using the SD library.
LCD DISPLAY
A LCD is connected with arduino
at 7th, 6th, 5th, 9th, 3rdand 8th pins to
display the reading of various
sensors .
T represents temperature, H
represents Humidity , M
represents Moisture and L
represents internal Light intensity
of the greenhouse, on the LCD.
SENSORS
TEMPERATURE SENSOR
MOISTURE SENSOR
Soil moisture sensor
measure the water content
in soil.
SOFTWARE
If the temperature exceeds beyond the limit set then a fan will be automatically
switched
When it reaches the desired temperature the fan will be switched OFF
automatically with the help of a relay.
Light sensor:
Light sensor sense the light and set an optimum light in the greenhouse for the
plants.
An artificial light will be switched ON automatically by the light sensor with the
help of relay if there is insufficient light for the plants in the greenhouse
And the light is switched OFF automatically when the plants get sufficient light
from the sun.
Moisture sensor:
signal to the water pump which as a result pumps up the water from
the tank and provide sufficient amount of water to the soil.
When the sensor senses the threshold value of water level in the soil
it automatically turn OFF the pump.
Humidity sensor:
If the humidity exceeds the limit set then an exhaust fan will be
switched ON with the help of relay to throw the humid air out of the
greenhouse to maintain the suitable environment for the plants.
INSTANTANEOUS OUTPUT OF
SENSORS DISPLAYED ON A WEBSITE
RESULTS/CONCLUSION
Temperature, Heat, Moisture and Light Sensors are the four
main sensors used in the project which give the exact value of
temperature, heat, moisture and light respectively. These
sensors give the correct result according to the plant's
condition. These results can be seen on the LCD screen
present on the project and on a INTERNET WEBSITE.
FRONT VIEW
VIEW
REAR
THANK YOU