3G Ranop 1: Module 0 - Introduction

You might also like

Download as ppt, pdf, or txt
Download as ppt, pdf, or txt
You are on page 1of 9

3G RANOP 1

Module 0 - Introduction

For internal use


1
Nokia Siemens Networks

Presentation / Author / Date

RANOP 1 - Introduction
RANOP 1 Pre-Optimisation material Contains
Module 1 Cluster Preparation
Module 2 RF Optimisation and Neighbour Planning
Module 3 Signalling
Module 4 Drive Test Analysis
Module 5 Inter-System Handover (ISHO) Optimisation
Module 6 Parameter Optimisation
Module 7 HSDPA Optimisation

For internal use


2
Nokia Siemens Networks

Presentation / Author / Date

Module 1 Cluster Preparation


Objectives
After this module the delegate shall be able to:-

Understand the importance of cluster preparation in:


Cluster planning
Cluster health checks based on RNW
measurements
Neighbour list verification and parameter audit

For internal use


3
Nokia Siemens Networks

Presentation / Author / Date

Module 2 RF Optimisation and Neighbour


Planning
Objectives
After this module the delegate shall be able to
perform: RF Verification and Optimisation actions
Understand how new Sites should be integrated to
the network
Neighbour Plan Verification

For internal use


4
Nokia Siemens Networks

Presentation / Author / Date

Module 3 Signalling Flows


Objectives
After this module the delegate shall be able to: Describe the signalling flows for AMR calls, PS calls, HSDPA
calls, ISHO, SHO and SRNC relocation procedures
Understand the key pieces of information contained in the
messages
Understand the protocols and transport mechanisms used
for the various messages

For internal use


5
Nokia Siemens Networks

Presentation / Author / Date

Module 4 Drive Test Analysis


Objectives
After this module the delegate shall be able to: Understand the different elements required for an
effective drive test program
Understand how all aspects of drive data can be used to
obtain a view of network performance
Differentiate between genuine (RF) and non-genuine
(system) failures
Understand the KPIs that can be obtained

For internal use


6
Nokia Siemens Networks

Presentation / Author / Date

Module 5 ISHO Optimisation


To be added

For internal use


7
Nokia Siemens Networks

Presentation / Author / Date

Module 6 Parameter Optimisation


Objectives
After this module the delegate shall be able to: List some of the parameters that can be tuned for
improved performance
Match these parameters to Call Setup and Call
Retention improvement areas
Understand how new RAS05 & RAS51 PS features
effect for the throughput, file download time & PS
Call setup success

HSDPA parameter optimisation is included to module 7- HSDPA optimisa


For internal use
8
Nokia Siemens Networks

Presentation / Author / Date

Module 7 HSDPA Optimisation


Objectives
After this module the delegate shall be able to:

Understand HSDPA optimisation areas

Understand main HSDPA KPIs and how to different


HSDPA parameter settings effect for the
performance

For internal use


9
Nokia Siemens Networks

Presentation / Author / Date

You might also like