Professional Documents
Culture Documents
Foot Step Power Generation System For Rural Energy Application To Run AC and DC Loads
Foot Step Power Generation System For Rural Energy Application To Run AC and DC Loads
Presented
by :
CONTENTS
Introduction
Block Diagram
Power Supply
Working
Advantages
Applications
Conclusion
Introduction
In this project we are generating
electrical power as non-conventional
method by simply walking or running
on the foot step. Non-conventional
energy system is very essential at
this time to our nation.
Nonconventional energy using foot
step is converting mechanical
energy into the electrical energy.
piezoelectric sensor
Apiezoelectric sensoris a
device that uses the
piezoelectric effectto measure
pressure,acceleration,strainor
forceby converting them to an
electricalsignal.
Inverter
Aninverterisanelectrical
devicethatconverts
directcurrent(DC)to
alternatingcurrent(AC);the
convertedACcanbeatany
requiredvoltageand
frequencywiththeuseof
appropriatetransformers,
switching,andcontrol
circuits.
Block Diagram
Specifications
12V 1.3Ah sealed lead acid battery
1. CE and RoHs
2. high quality and reliability
3. maintenance free
4. long life cycle
12V 1.3Ah sealed lead acid battery
General Features:
Sealed and maintenance free operation.
ABS containers and covers(UL94HB, UL94-0)optional.
Safety valve installation for explosion proof.
High quality and high reliability.
Exceptional deep discharge recovery performance.
Low self discharge characteristic.
Flexibility design for multiple install positions.
Working
When ever force is applied on piezo electric
crystals that force is converted to Electrical
energy is used to drive DC loads. And that
minute voltage Which is stored in the Lead
Acid battery. The battery is connected to the
inverter.
This inverter is used to convert the 12 Volt D.C
to the 230 Volt A.C. This 230 Volt A.C voltage is
used to activate the loads.
We are using conventional battery charging
unit also for giving supply to the circuitry.
Advantages
Reliable, Economical, Eco-Friendly.
Less consumption of Non- renewable
energies.
Excellent linearity over their dynamic range
Wide frequency
measured
range,
high
frequencies
can
be
Applications
Foot step generated power can be
used for agricultural, home
applications, street-lighting.
Foot step power generation can be
used in emergency power failure
situations.
Metros, Rural Applications etc.,
CONCLUSION
The project FOOT STEP POWER GENERATION
FOR RURAL ENERGY APPLICATION TO RUN A.C.
AND D.C. LOADS is successfully tested and
implemented which is the best economical,
affordable energy solution to common people.
This can be used for many applications in rural areas
where power availability is less or totally absence.
As India is a developing country where energy
management is a big challenge for huge population.
By using this project we can drive both A.C. as well
as D.C loads according to the force we applied on
the piezo electric sensor.
Any
Queries
Than
k
you