Professional Documents
Culture Documents
Inno Ds8000b
Inno Ds8000b
INNO DS8000B
SETTIN G TH E LAN G U AG E
Choose the Language from
Restart
Click
thethe
Instrument
device.
Settings
soft key.
Select
Press
Enter.
language
soft
key.
the
System
pop up menu. Use Up/Down
key.
Key.
Ente
r
English
Chinese
ROCEDURE:
o
o
o
o
o
o
o
o
Enter the Start and Stop Frequency or choose the Band from Band List key
Choose which type of cable is used. Click Cable List menu.
Calibrate the device.
Set the total distance i.e. from NodeB to Antenna port (length of Jumper
Cablesindoor and outdoor, and Feeder Cable)
Set the Max and Minimum Amplitude, click Amplitude (1) soft key.
Set the Marker (4) . Marker 1 (indoor jumper), Marker2 (Feeder), Marker3
(outdoor Jumper)
Press Hold (+/-) button to start the measurement.
Press Peak (6) button to see the maximum value of your measurement
and see the corresponding distance from your marker.
D TF M O D E
FREQUENCY BAND
D TF M O D E
CABLE TYPE
Choose which type of cable is used.
Click Cable List menu.
D TF M O D E
CALIBRATE: OPEN
D TF M O D E
CALIBRATE: SHORT
D TF M O D E
CALIBRATE: LOAD
If SHORT calibration is
completed,
Connect LOAD to RF port and
then press continue.
D TF M O D E
DISTANCE
Set the total distance i.e. from NodeB to Antenna port (length o
Jumper
Cables--indoor and outdoor, and Feeder Cable), then press
Enter key.
D TF M O D E
AMPLITUDE
Set the Max and Minimum Amplitude, press Amplitude (1) soft k
Max
(top)
Min
Max value should be higher than the VSWR alarm value . For example, fr
LMT MML DSP VSWR, the value measured is 280(.01), Max value should
at least 4 or 5.
Min value should at least be the ideal value, 1.
Created by: Engr Russell Salaza
FM Engineer
Mobily 3G Project
D TF M O D E
MARKER
Set the Marker (4) . Marker 1 (indoor jumper), Marker2 (Feeder),
Marker3
(outdoor Jumper)
Mark
er
Mark
Selec
er
t
Off
on
Mark
er
Edit
D TF M O D E
RUN/MEASUR
Connect the RF cable to the RF Port.
E
Press Hold (+/-) button
to start the
measurement
D TF M O D E
PEAK VALUE
Settings:
START FREQ =1920
Mhz
STOP FREQ = 2170
Mhz
CAL ON
DISTANCE = 40m
M1=4m
M1
M1:
3.9m/2.0
D TF M O D E
LOAD SET-UP
Only
change
the
Cable
type,
Distanc
e,
Marker
and or
Amplitu
de if
necessar
y.