Professional Documents
Culture Documents
AnalysisReport - PS - RAB - Failure V2
AnalysisReport - PS - RAB - Failure V2
Confidential
2015, 8 of Oct
Huawei Confidential
Page 2
Huawei Confidential
Page 3
Improvement Proposals
1. Initial Bit Rate (BETRAFFINITBITRATE) Reduced from 64 kbps to 32 kbps
- Reducing the R99 Initial Bit Rate will make the admission easier and reduce the rejections.
Impact: R99 Users may experience slower initial bit rate.
2. Guaranteed Bit Rate (GBR) Reduced from 64 kbps to 32 kbps
- Reducing GBR will be able to reduce the load during busy hour.
Impact: Users may experience low throughput in busy hour.
3. HSDPA GBP Turned OFF
- Turning the GBP OFF could make the system admit more HSDPA User.
Impact: HSDPA Users may experience lower throughput in busy hour.
4. Increase the HSDPA User Number
- Increase the HSDPA User Number could reduce the Number of R99 Users.
Impact: HSDPA Users may experience lower throughput in busy hour due to more HSDPA users sharing the resources.
Implementation
Scenario #1 (>64 Users) Scenario #2 (<64 Users) Priority
Expect congestions
Expect congestions
reduced
reduced
Highest
Expect congestions
Expect congestions
GBR - 32kbps (Stage 1) reduced
reduced
Highest
Expect congestions
reduced
HSDPA User Number
HSDPA GBP OFF (Stage 2) N/A
Increased
Medium
*Target to trial Stage 1, both RNC on Thursday 15 th Oct.
Expect congestions
* *Stage 2 and Stage 3 may be implemeted
reduced for all cells of TOP sites later as there will be no impact on non-congested
HSDPA User Num
HSDPA User Number
Medium (Case by
Increase (Stage 3)
Increased
N/A
Case)
Activities
Initial Bit Rate -32kbps
(Stage 1)
Huawei Confidential
Page 4
cells.
Q &A
-
Confirm if majority of current PS rab failure is of failure type due to DL power congestion ?
Foo: Yes, majority of the PS RAB Failure is DL power congestions.
R99 PS CAC uses initial Bitrate or GBR ?
Foo: Initial Bit Rate
HSDPA GBP measurement parameter is cell level or RNC level ? If cell level, how many cells in current UM network turned
off & On ?
Foo: Cell Level. All ON now.
What is the HSDPA GBR parameter name & current setting ? cell level or RNC level ?
Foo: RNC Level Setting: BEARTYPE=HSPA,ULGBR=D64, DLGBR=D64
Confirm R99 PS Initial birate only used for CAC but not DCCC ?
Foo: Yes, R99 PS Initial birate only used for CAC.
Confirm R99 PS initial bitrate only used for DCCC but not CAC ?
Foo: No, it is used for CAC only.
List down in table current UM sites with DL Pwr Congestion, categorize each into Scenario 1 vs 2, & indicate which
parameters & what values proposed to change, staged change or change all. State if to trial in group or sub group from this
list ?
Foo: Table as attached. Most of the cells are under Scenario#2, only 2 sectors(TSSN Sec1 & KGMR Sec 1) under Scenario#1. RNC Level GBR will be
changed first. Then, Stage2&3 will be executed only if the congestions are still serious. Congestions Cell Group will be by RNC, 2 groups.
List down KPI to monitor with indication of +-impact expected on each of them
Foo: For each of stage, the below KPIs will be monitored:
1. PS RAB Congestions- Expect reduced.
CellsListByScenari
2. HSDPA User Number- May increase
o
3. HSDPA Throughput May reduce, if too many HSDPA users.
4. Main KPIs will be monitored too- expect stable.
Proposed change impact Node-B, RNC load ?
Foo: No impact. But less congestions may improve the SPU load due to lesser rejections and retries.
Propose change Service affecting ?
Foo: Non Service Affecting.
Huawei Confidential
Page 5
Thank you!
www.huawei.com
Huawei Confidential
Page 6