This document provides instructions for drawing a spur gear in 9 steps. It begins with defining gear terminology and equations. Then it outlines the 9 steps for drawing a gear which are: 1) Draw the pitch circle, 2) Draw the addendum circle, 3) Draw the dedendum circle, 4) Draw the base circle, 5) Draw the tooth thickness lines, 6) Draw the tooth profiles, 7) Draw one tooth, 8) Draw the next tooth using commands to repeat, and 9) Repeat for all teeth. It also notes the "Array" command can be used in AutoCAD to simplify repeating teeth drawings.
This document provides instructions for drawing a spur gear in 9 steps. It begins with defining gear terminology and equations. Then it outlines the 9 steps for drawing a gear which are: 1) Draw the pitch circle, 2) Draw the addendum circle, 3) Draw the dedendum circle, 4) Draw the base circle, 5) Draw the tooth thickness lines, 6) Draw the tooth profiles, 7) Draw one tooth, 8) Draw the next tooth using commands to repeat, and 9) Repeat for all teeth. It also notes the "Array" command can be used in AutoCAD to simplify repeating teeth drawings.
This document provides instructions for drawing a spur gear in 9 steps. It begins with defining gear terminology and equations. Then it outlines the 9 steps for drawing a gear which are: 1) Draw the pitch circle, 2) Draw the addendum circle, 3) Draw the dedendum circle, 4) Draw the base circle, 5) Draw the tooth thickness lines, 6) Draw the tooth profiles, 7) Draw one tooth, 8) Draw the next tooth using commands to repeat, and 9) Repeat for all teeth. It also notes the "Array" command can be used in AutoCAD to simplify repeating teeth drawings.
This document provides instructions for drawing a spur gear in 9 steps. It begins with defining gear terminology and equations. Then it outlines the 9 steps for drawing a gear which are: 1) Draw the pitch circle, 2) Draw the addendum circle, 3) Draw the dedendum circle, 4) Draw the base circle, 5) Draw the tooth thickness lines, 6) Draw the tooth profiles, 7) Draw one tooth, 8) Draw the next tooth using commands to repeat, and 9) Repeat for all teeth. It also notes the "Array" command can be used in AutoCAD to simplify repeating teeth drawings.