Download as pptx, pdf, or txt
Download as pptx, pdf, or txt
You are on page 1of 8

SHOWER

Group members:
Masturah Binti T.Peter@ Mustafa

Dianna Binti Maxy

Hannah Fairuz Binti Hamdan


OBJECTIVE
To have a good economical shower
To innovate a new LED shower
INTRODUCTION
sensor shower head with (LED)

The high technology rain shower head powers the LED


lights using a built in hidden dynamo where the lights of this
rain shower will automatically turn on when water pressure
is turned on.

The lights will dim and brighten when the pressure of the
water lower and raise.

first shower invented by William Feetham (Mead,


In 2014, Ametis shower system has invented high
2013).
technology engineering features and integrated a it used hand pump and become more popular as it
chromotherapy system using LED lighting where the LED
used less water
lighting was positioned within the shower ring to add new This contraption had a pump that forced water into
dimension to the column which creates a soothing halo effect an upper basin above the head.
for the desired ambiance with LED lights reflecting off the Peoples would then pull a chain to release the water
ceiling and this allow the user to choose their mood or from this upper basin, although people have to
chroma(WISCONSIN, 2014) brace themselves for an onslaught of cold water.
DESIGN PROCESS
HEATER TANK

SHOWER HEAD
PIPING
LED

HEAT SENSOR

GLASS SLIDING
DOOR
COST Component Quantity Price (RM) Total price

Shower head 1 150 150

LED 30 1.70 50

Glass sliding door 1 200 200

Sensor 1 100 100

PVC Pipe
- Elbow pipe 2 2.00 4.00
- Straight 7ft 1.50/ft 10.50

Steel Pipe 5ft 3.00/ft 15.00

Service charge 200

TOTAL RM 729.50
DISCUSSION
Hot water 1
Mixing
chamber
Hot water at 120 kPa, 70 C, enters a mixing chamber and is
o
Cold water 2 Control
mixed with cold water at 10oC, 120 kPa, to produce 2.5 kg/s surface

of saturated liquid water at 120kPa. Steam and cold water


flow rates are at 1.71kg/s and 0.79 kg/s

Flowrate from hot water obtained was 0.00171 m3/s whilst


flowrate from cold water was 0.00079m3/s. This would be an
ideal flowrate of a hot water and cold water to get an
optimum flowrate of 0.00025 m3/s during shower.

Power calculated was 300.4268 W and 6.5sen/h for the cost


of using heater.
CONCLUSION
good
temperature
control

this automatic shower can be considered as an economical


friendly shower as it cost 6.5sen/h and uses power of 0.3kW
only.
Good
Showe
the ability to r
screen the
shower so
even stream
water does
of water
not splash
all over the
room
REFERENCES
Harwood, T. (2017). Guidance on flow rates for taps, showers and baths | Plumbers and
Heating Engineers. Harwoodandassociates.co.uk. Retrieved 10 March 2017, from
http://www.harwoodandassociates.co.uk/faqs/guidance-on-flow-rates-for-taps-showers-and-
baths/
Klenck, T. (2017). How It Works: Water Heater. Popular Mechanics. Retrieved 15 March
2017, from http://www.popularmechanics.com/home/interior-projects/how-to/a153/1275141/

You might also like