Professional Documents
Culture Documents
04 AG - OC001 - E02 - 1 ZXMSG 5200 Data Configuration CLI-58p
04 AG - OC001 - E02 - 1 ZXMSG 5200 Data Configuration CLI-58p
1) Operation
ZTE University
Course Object
System Management
Management Modes
System Management
Console Port
Telnet Mode
NetNumen N31 System
Management Modes
In-band Management Mode
Out-of-band Management Mode
Management Modes
----Configuring In-Band NM
Management Modes
----Configuring In-Band NM
Item Data
IP address; 10.63.10.105/24
Version: V2C
SNMP server host
Community: private
Alarm: NOTIFICATIONS
Management Modes
----Configuring In-Band NM
1. Configure in-band NM VLAN.
a. Enter global configuration mode.
ZXAN#configure terminal
Enter configuration commands, one per line. End with CTRL/Z.
ZXAN(config)#
b. Enter uplink interface configuration mode.
ZXAN(config)#interface gei_1/9/1
ZXAN(config-if)#
c. Add uplink port to NM VLAN in tag mode.
ZXAN(config-if)#switchport vlan 1000 tag
ZXAN(config-if)#exit
ZXAN(config)#
Management Modes
----Configuring In-Band NM
2. Configure IP address of in-band NM interface.
a. Enter VLAN interface configuration mode.
ZXAN(config)#interface vlan 1000
ZXAN(config-if)#
b. Configure IP address of in-band NM interface.
ZXAN(config-if)#ip address 10.67.1.10 255.255.255.0
ZXAN(config-if)#exit
ZXAN(config)#
3. Configure in-band NM route.
ZXAN(config)#ip route 10.63.10.0 255.255.255.0 10.67.1.254
4. Configure SNMP community.
ZXAN(config)#snmp-server community private view allview rw
5. Configure SNMP server (Trap server).
ZXAN(config)#snmp-server host 10.63.10.105 trap version
enable NOTIFICATIONS server-index 1 udp-port 162
Management Modes
----Configuring In-Band NM
6. Configure trap types (optional).
ZXAN(config)#snmp-server enable trap
ZXAN(config)#exit
ZXAN#
7. Save configuration data.
ZXAN#write
Building
...[OK]
Management Modes
----Configuring Out-of-Band NM
Management Modes
----Configuring Out-of-Band NM
Items Data
IP address; 10.63.10.105/24
Version: V2C
SNMP server host
Community: private
Alarm: NOTIFICATIONS
Management Modes
----Configuring Out-of-Band NM
1. Configure out-of-band NM IP address.
a. Enter the global configuration mode.
ZXAN#configure terminal
Enter configuration commands, one per line. End with CTRL/Z.
ZXAN(config)#
b. Enter management interface configuration mode.
ZXAN(config)#interface mng1
ZXAN(config-if)#
c. Configure out-of-band NM IP address.
ZXAN(config-if)#ip address 136.1.1.100
ZXAN(config-if)#exit
ZXAN(config-if)#
2. Configure out-of-band NM route.
ZXAN(config)#ip route 136.1.1.0 255.255.255.0 136.1.1.254
Management Modes
----Configuring Out-of-Band NM
3. Configure SNMP community.
ZXAN(config)#snmp-server community private view allview rw
4. Configure SNMP server (Trap server).
ZXAN(config)#snmp-server host 10.63.10.105 trap version 2c private
enable
NOTIFICATIONS server-index 1 udp-port 162
5. Configure trap types (optional).
ZXAN(config)#snmp-server enable trap
ZXAN(config)#exit
ZXAN#
6. Save configuration data.
ZXAN#write
Building configuration...
...[OK]
VoIP Service Configuration
Configuring VoIP Service (H.248)
Configuring VoIP Service (SIP)
Configuring VoIP Service (H.248)
Configuring VoIP Service (H.248)
Item Data
In-band network 10.67.1.10/24
management IP
Uplink port 1/9/1
User port 1/3/132
VLAN 4 (Signaling) 6(media) 1000(Management)
MGC (SS) MGC ID: 1
IP address: 10.16.98.102/24
Protocol port number: 2944 (By default, the
port for H.248 protocol is Port 2944.)
Type: zte
MG (MSG 5200) MG ID: 1 (Presently, the system only supports 1.)
Corresponding MGC ID: 1
Port number: 2944
Configuring VoIP Service (H.248)
Item Data
10.63.86.113/24
Media IP
Route: 10.63.86.254
10.63.90.120/24
signaling IP
Route: 10.63.90.254
Prefix: USER
TID type: 3 (USER000-USER031)
User circuit TID
Start number: 0
TID length without the prefix: 3 digits
Prefix: RTP
RTP resource Start seq number: 1 (default)
RTP resource number: 240
Configuring VoIP Service (H.248)
1. Configure VoIP VLAN.
a. Enter into the global configuration mode.
ZXAN#configure terminal
Enter configuration commands, one per line. End with CTRL/Z.
ZXAN(config)#
b. Create VLAN
ZXAN(config)#vlan 4
ZXAN(config-vlan)#voip-ctrl //(for signaling IP)
ZXAN(config-vlan)#exit
ZXAN(config)#vlan 6
ZXAN(config-vlan)#voip-bind //(for media IP)
ZXAN(config)#exit
Configuring VoIP Service (H.248)
2. Configure the uplink port.
a. Enter into the interface configuration mode.
ZXAN(config)#interface fei_1/9/1
ZXAN(config-if)#
b. Add the uplink port to VoIP VLAN, tag
ZXAN(config-if)#switchport vlan 4 tag
ZXAN(config-if)#switchport vlan 6 tag
c. Configure the uplink port as auto negotiation mode.
ZXAN(config-if)#negotiation auto
d. Enable the uplink port.
ZXAN(config-if)#no shutdown
ZXAN(config-if)#end
ZXAN#
If GISB+VoIP daughter card, configure IP address in VLAN
ZXAN(config)#interface vlan 4
ZXAN(config-if)#ip address 10.63.86.113 255.255.255.0
ZXAN(config)#interface vlan 6
ZXAN(config-if)#ip address 10.63.90.120 255.255.255.0
Configuring VoIP Service (H.248)
3. Configure MGC.
ZXAN#msag
ZXAN(config-msag)#mgc add 1 10.16.98.102 port 2944 type 1
4. Configure MG.
ZXAN(config-msag)#mg add 1 1 port 2944
5. Configure media and signaling IP.
ZXAN(config-msag)#voip interface add ctrl-ip 10.63.86.113 ctrl-mask 255.255.255.0
media-ip 10.63.90.120 media-mask 255.255.255.0
ZXAN(config-msag)#voip route add 10.63.86.254 type 2 (signaling IP)
ZXAN(config-msag)#voip route add 10.63.90.254 type 1 (media IP)
6. Configure the internal media flow route.
ZXAN(config-msag)#media-nat add 11 1 9 5 5 10.63.86.113 10000
7. Configure the user circuit TID.
ZXAN(config-msag)#slc terminationid add rackno 1 shelfno 1 3 USER type 3
begin-no 0 digit-length 3 mgid 1
8. Configure RTP resource.
ZXAN(config-msag)#rtp terminationid add RTP begin-seqno 1 240
Configuring VoIP Service (H.248)
9. Configure management IP
ZXAN(config)#interface vlan 1000
ZXAN(config-if)#ip address 10.67.1.10/24 255.255.255.0
ZXAN(config)#interface fei_1/9/1
ZXAN(config-if)#switchport vlan 1000 tag
Add a route (10.63.10.0 is on the same network segment with the switch)
when there are three IPs.
ZXAN(config)#ip route 10.63.10.0 255.255.255.0 10.67.1.254
ZXAN(config-if)#exit
ZXAN(config)#exit
10. Save data.
ZXAN#write
Configuring VoIP Service (SIP)
Configuring VoIP Service (SIP)
Item Data
In-band network
10.61.184.209
management IP
Uplink port 1/9/1
User port 1/3/132
VoIP VLAN 120
Protocol :SIP
Protocol and port number
Port number: 5060
MGC ID 1
MGC (SS)
IP address: 10.16.113.27
MG ID: 1 (Presently, the system only supports 1.)
MG (MSG 5200) Corresponding MGC ID: 1
Domain name: ims.fj.chinamobile.com
Media and signalling IP/mask 10.63.198.23
Media and signalling IP 0/255.255.255.0
Route: 10.63.198.254
Configuring VoIP Service (SIP)
Item Data
Item Data
Prefix: RTP
RTP resource Start seq number: 1 (default)
RTP resource number: 720
Circuit number: 3/16
The first complete number: +8659167050110
Corresponding number analysis table: SIPDM
Password: 123456
SIP user Prefix (authentication user name): 111670501
Start number: 10
SIP number length without the prefix: 2 digits
Type: 3
SIP user ID: +8659167050110+8659167050115
Configuring VoIP Service (SIP)
Service VLAN:3000
User ports:5/1-16
Uplink port:9/2
Downstream rate:20Mbps
Upstream rate:20Mbps
Configuring VDSL2 Service
1. Add the service VLAN.
a. Execute configure terminal command to enter the
configuration mode.
ZXAN#configure terminal
Enter configuration commands, one per line. End with CTRL/Z.
ZXAN(config)#
b. Execute vlan command to add the service VLAN.
ZXAN(config)#vlan 3000
ZXAN(config-vlan)#
2. Add the user ports to the service VLAN.
a. Execute nterface vdsl_1/5/1-16 command to enter
the VDSL interface configuration mode.
ZXAN(config)#nterface vdsl_1/5/1-16
ZXAN(config-if-range)#
Configuring VDSL2 Service
b. Execute switchport command to add user ports to the service
VLAN, untagged.
ZXAN(config)#interface vdsl_1/5/1-16
ZXAN(config-if-range)#switchport mode access
ZXAN(config-if-range)#switchport default vlan 3000
3. Add the uplink port to the service VLAN.
a. Execute interface fei_1/9/2 command to enter the uplink
interface configuration mode.
ZXAN(config)#interface fei_1/9/2
ZXAN(config-if)#
b. Execute switchport vlan command to add the uplink port to the
service VLAN, tagged.
ZXAN(config)#interface fei_1/9/2
ZXAN(config-if)#switchport mode trunk
ZXAN(config-if)#switchport vlan 3000 tag
ZXAN(config-if)#
Configuring VDSL2 Service
4. Execute vdsl2 base-profile command to create a base profile.
ZXAN(config)#vdsl2 base-profile vdbaseprofile
This baseprofile do not exist. Would you like to create?
[y/n][y]
ZXAN(config)#vdsl2 base-profile vdbaseprofile
First configure vdsl2 transmode bits:
Preferred modes:
[0] None
[1] G.993.2 Region A (North America) (Annex A/G.993.2).
[2] G.993.2 Region B (Europe) (Annex B/G.993.2).
[3] G.993.2 Region C (Japan) (Annex C/G.993.2).
Please choose one from the preferred modes:[2]
Second configure adsl2 transmode bits:
Preferred modes:
[1] T1.413 G.dmt(fdm)
[2] T1.413 G.dmt(ec)
[3] Adsl2(fdm) Adsl2+(fdm) G.dmt(fdm) ReAdsl2(fdm)
[4] Adsl2(fdm) Adsl2+(ec) G.dmt(fdm) ReAdsl2(fdm)
[5] Adsl2(fdm) Adsl2+(fdm) G.dmt(fdm) ReAdsl2(fdm) T1.413
[6] Adsl2(fdm) Adsl2+(ec) G.dmt(fdm) ReAdsl2(fdm) T1.413
[7] Custom
[8] All Capability
Please choose one transmode to change to (1-8):[3]
please configure the StandardProfile:
g993_2_8A (0-disable,1-enable)[0]
g993_2_8B (0-disable,1-enable)[0]
g993_2_8C (0-disable,1-enable)[0]
g993_2_8D (0-disable,1-enable)[0]
g993_2_12A (0-disable,1-enable)[1]
Configuring VDSL2 Service
g993_2_12B (0-disable,1-enable)[0]
g993_2_17A (0-disable,1-enable)[0]
g993_2_30A (0-disable,1-enable)[0]
Annex_B common BandPlans:
[1] BP_B7_1 997-M1c-A-7
[2] BP_B7_2 997-M1x-M-8
[3] BP_B7_3 997-M1x-M
[4] BP_B7_4 997-M2x-M-8
[5] BP_B7_5 997-M2x-A
[6] BP_B7_6 997-M2x-M
[7] BP_B7_7 HPE17-M1-NUS0
[8] BP_B7_8 HPE30-M1-NUS0
[9] BP_B7_9 997E17-M2x-NUS0
[10] BP_B7_10 997E30-M2x-NUS0
[11] BP_B8_1 998-M1x-A
[12] BP_B8_2 998-M1x-B
[13] BP_B8_3 998-M1x-NUS0
[14] BP_B8_4 998-M2x-A
[15] BP_B8_5 998-M2x-M
[16] BP_B8_6 998-M2x-B
[17] BP_B8_7 998-M2x-NUS0
[18] BP_B8_8 998E17-M2x-NUS0
[19] BP_B8_9 998E17-M2x-NUS0-M
[20] BP_B8_10 998ADE17-M2x-NUS0-M
[21] BP_B8_11 998ADE17-M2x-A
[22] BP_B8_12 998ADE17-M2x-B
[23] BP_B8_13 998E30-M2x-NUS0
[24] BP_B8_14 998E30-M2x-NUS0-M
[25] BP_B8_15 998ADE30- M2x-NUS0-M
[26] BP_B8_16 998ADE30- M2x-NUS0-A
please configure the VDSL2 Limit PSD Masks and Bandplans:[14]
Configuring VDSL2 Service
zxAnXdsl2LConfProfUs0Disable(enable(1),disable(2)):[1]
xdsl2LConfProfVdsl2CarMask:
There are 0 bands been set, please to choose (0-no change,
1-modify the bands, 2-delete all bands):[0]
xdsl2LConfProfRfiBands:
There are 0 bands been set, please to choose (0-no change,
1-modify the bands, 2-delete all bands):[0]
zxAnXdsl2LConfProfVdslMaxNomAtpDs(0..255(0.1 dBm)):[205]
zxAnXdsl2LConfProfVdslMaxNomAtpUs(0..255 (0.1dBm)):[145]
zxAnXdsl2LConfProfAdslMaxNomAtpDs(0..255(0.1 dBm)):[205]
zxAnXdsl2LConfProfAdslMaxNomAtpUs(0..255 (0.1dBm)):[145]
zxAnXdsl2LConfProfRaUsNrmDs(0..310(0.1dB)):[90]
zxAnXdsl2LConfProfRaUsNrmUs(0..310(0.1dB)):[90]
zxAnXdsl2LConfProfRaUsTimeDs(0..16383(s)):[60]
zxAnXdsl2LConfProfRaUsTimeUs(0..16383(s)):[60]
zxAnXdsl2LConfProfRaDsNrmsDs(0..310(0.1dB)):[30]
zxAnXdsl2LConfProfRaDsNrmsUs(0..310(0.1dB)):[30]
zxAnXdsl2LConfProfRaDsTimeDs(0..16383(s)):[60]
zxAnXdsl2LConfProfRaDsTimeUs(0..16383(s)):[60]
Please configure zxAnXdsl2LConfProfPmMode:
[0] allowTransitionsToIdle(0)
[1] allowTransitionsToLowPower(1)
zxAnXdsl2LConfProfPmMode:[1]
zxAnXdsl2LConfProfL0Time(0..255)s:[255]
zxAnXdsl2LConfProfL2Time(0..255)s:[255]
zxAnXdsl2LConfProfL2Atpr(0..31) dB:[3]
zxAnXdsl2LConfProfL2Atprt(0..31) dB:[31]
zxAnXdsl2LConfProfPsdMaskDs:
There are 0 breakpoints been set, please to choose (0-no change,
1-modify the bands, 2-delete all bands):[0]
zxAnXdsl2LConfProfPsdMaskUs:
Configuring VDSL2 Service
There are 0 breakpoints been set, please to choose (0-no change,
1-modify the bands, 2-delete all bands):[0]
zxAnXdsl2LConfProfTrellisDs(enabled (1), disabled (2)) :[1]
zxAnXdsl2LConfProfTrellisUs(enabled (1), disabled (2)) :[1]
zxAnXdsl2LConfProfBitswapDs(enabled (1), disabled (2)) :[1]
zxAnXdsl2LConfProfBitswapUs(enabled (1), disabled (2)) :[1]
zxAnXdsl2LConfProfRetrainMode(enabled (1), disabled (2)):[1]
zxAnXdsl2LconfProfSnrModeDs(disabled (1), enabled (2)) :[1]
zxAnXdsl2LconfProfSnrModeUs(disabled (1), enabled (2)) :[1]
zxAnXdsl2LConfProfTxRefVNDs:
There are 0 breakpoints been set, please to choose (0-no change,
1-modify the bands, 2-delete all bands):[0]
zxAnXdsl2LConfProfTxRefVNUs:
There are 0 breakpoints been set, please to choose (0-no change,
1-modify the bands, 2-delete all bands):[0]
zxAnXdsl2Ch1ConfProfMinDataRateLowPwrDs((0..200000)kbps):[128]
ZXAN(config)#
Configuring VDSL2 Service
5. Execute vdsl2 service-profile command to create a service profile.
ZXAN(config)#vdsl2 service-profile vdservicefile
This serviceprofile do not exist. Would you like to create?
[y/n][y]
ZXAN(config)#vdsl2 service-profile vdservicefile
zxAnXdsl2LConfProfForceInp(1-Enable,2-Disable):[1]
zxAnXdsl2LConfProfRaModeDs(1-Fixed,2-AdaptAtStartup,
3-AdaptAtRuntime):[2]
zxAnXdsl2LConfProfRaModeUs(1-Fixed,2-AdaptAtStartup,
3-AdaptAtRuntime):[2]
zxAnXdsl2LConfProfTargetSnrmDs(0..310(0.1dB)):[80]
zxAnXdsl2LConfProfTargetSnrmUs(0..310(0.1dB)):[80]
zxAnXdsl2LConfProfMaxSnrmDs(80..310(0.1dB)):[300]
zxAnXdsl2LConfProfMaxSnrmUs(80..310(0.1dB)):[300]
zxAnXdsl2LConfProfMinSnrmDs(0..80(0.1dB)):[0]
zxAnXdsl2LConfProfMinSnrmUs(0..80(0.1dB)):[0]
zxAnXdsl2Ch1ConfProfMaxDataRateDs((0..200000)kbps):[120000]20000
zxAnXdsl2Ch1ConfProfMaxDataRateUs((0..200000)kbps):[120000]20000
zxAnXdsl2Ch1ConfProfMinDataRateDs((0..120000)kbps):[32]
zxAnXdsl2Ch1ConfProfMinDataRateUs((0..120000)kbps):[32]
zxAnXdsl2Ch1ConfProfMaxDelayDs((0..63)ms):[16]
zxAnXdsl2Ch1ConfProfMaxDelayUs((0..63)ms):[16]
Please configure MinProtection:
noProtection (1) - INP not required
halfSymbol (2) - INP length = 1/2 symbol
singleSymbol (3) - INP length = 1 symbol
twoSymbols (4) - INP length = 2 symbols
threeSymbols (5) - INP length = 3 symbols
fourSymbols (6) - INP length = 4 symbols
Configuring VDSL2 Service
fiveSymbols (7) - INP length = 5 symbols
sixSymbols (8) - INP length = 6 symbols
sevenSymbols (9) - INP length = 7 symbols
eightSymbols (10) - INP length = 8 symbols
nineSymbols (11) - INP length = 9 symbols
tenSymbols (12) - INP length = 10 symbols
elevenSymbols (13) - INP length = 11 symbols
twelveSymbols (14) - INP length = 12 symbols
thirteenSymbols (15) - INP length = 13 symbols
fourteenSymbols (16) - INP length = 14 symbols
fifteenSymbols (17) - INP length = 15 symbols
sixteenSymbols (18) - INP length = 16 symbols
zxAnXdsl2Ch1ConfProfMinProtectionDs(1..18):[1]
zxAnXdsl2Ch1ConfProfMinProtectionUs(1..18):[1]
ZXAN(config)#
6. Attach the base profile and service profile to VDSL users.
a. Execute interface vdsl_1/5/1-16 command to enter VDSL interface
configuration mode.
ZXAN(config)#interface vdsl_1/5/1-16
ZXAN(config-if-range)#
Configuring VDSL2 Service
b. Execute vdsl2 base-profile command to attach the base profile
to the VDSL users.
ZXAN(config-if-range)#vdsl2 base-profile vdbaseprofile
ZXAN(config-if-range)#
c. Execute vdsl2 service-profile command to attach the service
profile to the VDSL users.
ZXAN(config-if-range)#vdsl2 service-profile vdservicefile
ZXAN(config-if-range)#
7. Execute no shutdown command to enable VDSL user
ports.
ZXAN(config)#interface vdsl_1/5/1-16
ZXAN(config-if-range)#no shutdown
ZXAN(config-if-range)#
8. Execute write command to save the configuration.
ZXAN#write
Building configuration...
...[OK]
ZXAN#
Configuring Multicast Service
Configuring Multicast
1. Enable the IGMP function in both configuration and interface modes.
ZXAN(config)#igmp enable
ZXAN(config)#interface adsl_1/4/1-16
ZXAN(config-if-range)#igmp enable
2. Execute igmp mvlan command to register the VLAN.
ZXAN(config)#igmp mvlan 20
ZXAN(config)#igmp mvlan 20 enable
3. Execute igmp mvlan command to configure the IGMP work mode.
ZXAN(config)#igmp mvlan 20 work-mode snooping
4. Execute igmp mvlan command to configure the MVLAN source port.
ZXAN(config)#igmp mvlan 20 source-port fei_1/9/2
Configuring Multicast Service
5. Execute igmp mvlan command to configure the MVLAN receive port.
ZXAN(config)#igmp mvlan 20 receive-port adsl_1/4/1-16 pvc 1
6. Execute igmp mvlan command to enable the MVLAN group filter .
ZXAN(config)#igmp mvlan 20 group-filter enable
7. Execute igmp mvlan command to configure the MVLAN group IP
address.
ZXAN(config)#igmp mvlan 20 group 224.1.1.10
8. Execute write command to save the configuration.
ZXAN#write
Building configuration...
...[OK]
ZXAN#
Configuring IPTV Service
1. Execute iptv cac command to enable the CAC function.
ZXAN(config)#iptv cac enable
2. Execute iptv prw command to enable the preview function and
configure the preview parameters.
ZXAN(config)#iptv prw enable
ZXAN(config)#iptv prw auto-reset 00:15:00
3. Execute iptv view-profile command to configure preview profile.
ZXAN(config)#iptv view-profile iptvuser blackout 100
ZXAN(config)#iptv view-profile iptvuser count 50
ZXAN(config)#iptv view-profile iptvuser duration 1500
Configuring IPTV Service
4. Execute iptv sms-server command to configure SMS server IP
address.
ZXAN(config)#iptv sms-server 100.10.1.120
5. Execute the following commands to configure IPTV channels.
ZXAN(config)#iptv channel mvlan 20 group 224.3.4.1 name CCTV1 id 1
ZXAN(config)#iptv channel mvlan 20 group 224.3.4.2 name CCVT2 id 2
ZXAN(config)#iptv channel mvlan 20 group 224.3.4.3 name CCVT3 id 3
ZXAN(config)#iptv channel mvlan 20 group 224.3.4.4 name CCVT4 id 4
Configuring IPTV Service
6. Execute iptv channel command to apply IPTV profile to the channel.
ZXAN(config)#iptv channel cctv1 view-profile iptvuser
ZXAN(config)#
7. Execute iptv package command to group the channels in a package.
ZXAN(config)#iptv package cctvpackage channel 1,3 watch
..Complete!
ZXAN(config)#iptv package cctvpackage channel 2 preview
.Complete!
ZXAN(config)#iptv package cctvpackage channel 4 deny
Complete!
ZXAN(config)#
Configuring IPTV Service
8. Execute iptv cdr command to enable and configure the CDR
parameters.
ZXAN(config)#iptv cdr enable
ZXAN(config)#iptv cdr max-records 50000
ZXAN(config)#iptv cdr report-interval 20
ZXAN(config)#
9. Execute the following commands to apply the IPTV profile to users.
ZXAN(config)#interface adsl_1/4/1-16
ZXAN(config-if-range)#switchport vlan 20 untag pvc 1
ZXAN(config-if-range)#igmp enable
ZXAN(config-if-range)# iptv package cctvpackage pvc 1
ZXAN(config-if-range)#
Configuring IPTV Service
10. Execute the following command to configure the uplink port.
ZXAN(config)#interface fei_1/9/2
ZXAN(config-if)#switchport vlan 20 tag
ZXAN(config-if)#
11. Execute write command to save the configuration.
ZXAN#write
Building configuration...
...[OK]
ZXAN#