Professional Documents
Culture Documents
A Project Report By:: Shibam Sarbswa Rudraksha Shukla Manish Chourassia Karan Singh Tajvendra Rawat: Sadaf Akhtar
A Project Report By:: Shibam Sarbswa Rudraksha Shukla Manish Chourassia Karan Singh Tajvendra Rawat: Sadaf Akhtar
A Project Report By:: Shibam Sarbswa Rudraksha Shukla Manish Chourassia Karan Singh Tajvendra Rawat: Sadaf Akhtar
Sarbswa
Rudraksha Shukla
Manish Chourassia
Karan Singh
Tajvendra Rawat
One can buy the vehicle with the engine or buy an engine to be installed
in the vehicle. Typical air engines use one or more expander pistons.
In some applications it is advantageous to heat the air, or the engine, to
increase the range or power.
Tanks
The tanks must be designed to safety standards appropriate for a
pressure vessel.
The storage tank may be made of:
Steel
Carbon fiber
Aluminum
Kevlar
Other materials or combinations of the above.
MATERIALS & METHOD
Normally in off condition Solenoid valve air inlet hole are B and E
and outlet hole are D and C. due to this cylinder squeeze
COMPRESSED AIR
We weld two crankshafts and connect pneumatic cylinder with them and
fix them on body frame with the help of bearing. We weld one sprocket on
the right side of crank shaft to transfer its rotation to gear box.
CONNECT 4 SOLENOID COIL
Now we connect 4 solenoid coil with pneumatic cylinder for provide 4 stroke
(every coil provide 90 degree rotation when current pass through them).
POWER TRANSMISSION
Single acting cylinders (SAC) use the force imparted by air to move in one
direction (usually out), and a spring to return to the "home" position
DC MOTOR
Advantages