Professional Documents
Culture Documents
Telkomsel Call Flow CS
Telkomsel Call Flow CS
RANAP: Common ID
Soft handover is not allowed during the RAB establishment procedure (The mobile can not add or remove cells in
AS, parallel procedure not allowed) this makes the UE and Node B particularly sensitive to mobility and dominance
Timer wf_rb_setup_cpl (6s) is started when the RRC: Radio Bearer Setup message is sent to the UE In case the
timer expires Iu Release Request is sent to the CN with release cause (radio_conn_lost)
Call Established
RANAP: Location Report
RRC: Measurement Control
L1 Synchronization
MTC CS Message Flow
UE NodeB RNC MGW/CN
RANAP: Paging
RRC: Paging Type 1
RRC: RRC Connection Request (RACH)
NBAP: Radio Link Setup Request
T300=2s ; N300=3
NBAP: Radio Link Setup Response RNC checks if resources are
available: BTS, AC,
ALCAP: ERQ (Establish Request) Transmission.
If not it sends RRC
ALCAP: ECF (Establish Confirm) Connection Reject
FP: Downlink Synch
FP: Uplink Synch
L1 Synchronization
RRC: RRC Connection Setup (FACH) [RRCconnRepTimer1/2(100ms,1s)]
L1 Synchronization
NBAP: Synchronization Indication
RRC: RRC Connection Setup Complete (DCH)
RANAP: Common ID
Soft handover is not allowed during the RAB establishment procedure (The mobile can not add or remove cells in
AS, parallel procedure not allowed) this makes the UE and Node B particularly sensitive to mobility and dominance
Timer wf_rb_setup_cpl (6s) is started when the RRC: Radio Bearer Setup message is sent to the UE In case the
timer expires Iu Release Request is sent to the CN with release cause (radio_conn_lost)
Call Established
RANAP: Location Report
RRC: Measurement Control
DL SRB
RRC messages information
UE in DUAL MODE
RRC messages information
Voice AMR
RRC messages information
CS call, 64Kbps,
Transparent
Video Call
RRC messages information
Video CS 64:
DL SF 32
UL SF 16
Voice AMR:
DL SF 128
UL SF 64