Professional Documents
Culture Documents
Data For Diffraction
Data For Diffraction
Plot
1. Total strain(y axis) vs time(x axis)
2. Creep strain(y axis) vs time (x axis)(creep strain = Remove instantaneous deformation from total strain
(take best approximation))
4. Strain rate (y axis) vs strain (x axis) at constant stress (i.e. you know from your experimental condition)
6. Make a table
creep strain rate vs true stress. You will get these values from point “5”
0.15
SAC 305
Temp =150C
Stress = 10MPa
0.1
Strain
0.05
0
0 500 1000 1500 2000
Fig 1
Time(S)
2. Creep strain(y axis) vs time (x axis)(creep strain = Remove instantaneous
deformation from total strain (take best approximation))
0.15
0.1
Creep strain
0.05
Fig 2
3. True strain (y axis) vs time (x axis)
0.16
0.14
0.12
0.1
True strain
0.08
0.06
0.04
0.02
0 500 1000 1500 2000
Time
Fig 3
4. Strain rate (y axis) vs strain (x axis) at constant stress (i.e. you know from your
experimental condition)
0.0002
0.00014
0.00015
True strain rate
0.00012
0
-5
6 10
-5
-5 10
0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 -5
4 10
True strain 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16
Fig 5
0.00014
0.00012
Calculate true stress
True strain rate
-5
4 10
0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16
True strain
Fig 6
In fig 6. I have showed 5 points.
At each point Calculate true stress. you know the true strain rate and true strain.
Substitute engineering strain and engineering stress(calculate from initial cross section) in
equation 3. You will get true stress.
Points True strain rate True strain True stress
1
2
3
4
5
-Mean---------- ---------Mean---------- ----Mean----
7. Plot Mean true strain rate (y axis) vs Mean true stress (x axis).