Professional Documents
Culture Documents
Product and Package Vibration Testing Webinar Mar 2016
Product and Package Vibration Testing Webinar Mar 2016
Herb Schueneman
Herb Schueneman
Chairman, WESTPAK, Inc.
Founder, Chairman
WESTPAK, INC. March
Dec 20152016
What’s This All About?
2
Agenda
• Background, terminology, etc.
• Vibration Dynamics
– Spring/Mass Models; Forces vs. Free Response
– Types of Excitation; Sine, Random, Acoustic,
Sources of input
– Resonance, Transmissibility, Damping, Fatigue
– Package Cushioning (springs), A/A plots
– Design for Vibration
3
Dynamics
• The study of mass that is moving in a flexible
environment
• “Flexibility” implies springs so the study of
dynamics starts with a thorough understanding
of “Spring/Mass Systems”
4
SDOF Spring/Mass System
MASS
5
SDOF Spring/Mass System
AN INPUT APPLIED HERE
RESULTS IN “FREE
VIBRATION” OF THE MASS
MASS
6
SDOF Spring/Mass System
MASS
Maximum velocity
7
Spring Mode Doesn’t Matter
Tension
Compression
8
Natural Frequency
1 K K 1
f n
2 M
3.13
M
3.13
9
Natural or Resonant Frequency
As earlier noted, excitation of
the mass results in motion we
call free vibration or “Natural
Frequency”, fn.
10
SDOF vs. MDOF
“Normal” products are pretty complex. A multiple
degree of freedom (MDOF) model is more appropriate
however much more complex and difficult to analyze.
11
Spring Types
Almost all products or product/package systems
can be analyzed and modeled as complex
spring/mass systems.
12
Spring Types
Linear Spring
k=F/D
F ∆=W/k
D A p = Fn X V
13
Spring Types
2kd (def)
SPRING FORCE = tan
2d
k
d
14
Spring Types
k
1
def
SPRING FORCE =kd tanh
F d
DEFLECTION
15
Spring Types
• SDOF models assume linear springs
• Most flexibility in systems is non-linear
(Printed Circuit Boards)
16
Coupling
Coupled vs. Uncoupled Motion
F
2
• The mass is a homogenous
rigid block with center of
M
gravity (cg) at point A.
• The response of the block to
F1 is pure vertical motion.
F3
A B
17
Coupling
Coupled vs. Uncoupled Motion
F
2
• If (cg) is at point B, F1
produces both vertical
M
and rotational motion
of the block. In this
F3
A B case, the motion is
said to be coupled.
• With (cg) at point B, F3
F1 produces uncoupled
horizontal motion.
18
Time for Questions !
19
Resonance
Resonance occurs when a component or
system is forced at its fn.
• Spring/Mass response is
amplified at resonance.
• This is where damage, fatigue,
etc. is most likely to happen.
20
Resonance
Transmissibility Plot
Ar
Ai
f
21
How the Test is Conducted
Example
23
Excitation: the Good & the Bad
Type Positive Not-So-Positive
Sinusoidal • Easy to understand • Gives false amplification values
• Good visual feedback • Over-test for fatigue potential
• Grandfathered tried & true • Doesn’t account for constructive and
destructive interferences between
systems
Random • Quicker • More complex
• Less fatigue potential • Requires a specific controller
• Realistic
• Matches “real life”
Acoustic • Usable for heavy systems • Very expensive
• Good high frequency • Requires large chamber & analytical
capability
24
Damping
Damping (Rc) is
expressed as a
ratio of observed
damping to
“Critical Damping”
in a system.
25
Damping
“Critical Damping” is where the mass
returns to its initial position in the minimum
time without overshoot.
26
Mechanical Fatigue
Fatigue is the weakening of a
material caused by repeatedly
applied loads. It is the
progressive and localized
structural damage that occurs
when a material is subjected to
cyclic loading. Resonance is the
prime contributor. Non-critical
damping is a factor.
27
Sources of Vibration Input
Sources of input include:
• Operation
– Rotating equipment (cooling fans, motors, etc.)
– Nearby influences
– Strong air currents
– Earthquakes
• Non-Operating
– Transportation, shipping (the biggest), logistics
– Normal movement within intended environment
28
Typical Test Procedures
• Sine search & dwell is still used (problems..)
• Random dwell is more common
• Margin test (to failure) has gained wide acceptance
(HALT)
• Imposed by third party
• Attempt to duplicate the in-use environment (military
vehicles & weapons)
• Lots of creativity in test procedures…. (be VERY careful
here….)
29
Common Test Specs
• ASTM D3580 (doesn’t say much)
• IEC 60068-2-6, -47 (similar)
• Federal Std 101-C (very dated)
• ISO – various standards
• JIS - Japanese Industrial Standards
• MIL STD 167, 810
• Telcordia GR-63 CORE (Bell System origin; POTS – Plain Old
Telephone System)
30
Establishing the Test Plan
• Design of Experiment (DoE)
• Characterize environments EUT will see
• Define test inputs to cover all environments
• Consider Combined Environments
• Remember shipping / distribution (severe!)
• Determine acceptance criteria / inspections
• Quantitative when possible
• Cosmetic, functional, safety
31
Establishing the Test Plan
• Start Small
• First: Test temperature and basic
mechanical vibration
• Second: Comprehensive testing (single
environment)
• Third: Combined Environment testing
(as applicable)
32
Combined Environment Test Inputs
• Every product will see different environments
• Sample EUT: Ruggedized Laptop Computer
• Test inputs discussed
• Temperature + Vibration
• Impact Testing + Temperature Extremes
• Freefall Drop Testing + Temperature Extremes
• Mechanical Cycling + Temperature Extremes
• Temperature + Pressure
• Fluid Submersion + Temperature + Pressure
• Thermal Shock
33
Temperature + Vibration
• Background of “AGREE” Testing
• Typical Test
• Cyclic functional operation
• Temperature by application
• X, Y, Z axis in single direction
• Random frequency domain by application
• Transport (1Hz – 300Hz)
• Bare Product (5Hz – 2,000Hz)
• Test Standards
• MIL-STD-883, MIL-HDBK-781
• Variations of Testing
• Common Issues / Results
• Unsupported / surface mount component failure
• Permanent failure to operate correctly
34
End Result
• Ruggedized product
• Free of latent mechanical defects
• Good to great reliability out of the box
• A prioritized list of improvements to be made
• Verification for meeting a spec requirement
35
How About the Package Cushion?
• One of the functions of a cushion system is to
dampen vibration input at those frequencies where
the product is sensitive.
• In essence, we need to know the dynamic spring rate
of the cushion.
• Now we know the PRODUCT vibration sensitivity.
• Now we need to determine the CUSHION vibration
characteristics so that an optimum package system
can be designed.
36
Vibration Cushion Dynamics
• “Vibration Cushion Curves” (called
“Amplification/Attenuation Plots”) are developed
by loading a cushion, shaking it, and measuring
the response.
Guided Test
Block
Method
37
Vibration Cushion Dynamics
T-C MODEL C-C MODEL
Alternate CUSHION
CUSHION
Method RESPONSE
ACCELEROMETER MASS
MASS
INPUT
CUSHION ACCELEROMETER CUSHION
CUSHION
38
Vibration Cushion Dynamics
CUSHION TEST
SAMPLE
ELECTRODYNAMIC
SHAKER
39
Vibration Cushion Dynamics
For either method, the S/M system is excited
(random or sine vibration) and the response/input
ratio is plotted as a function of frequency.
40
Vibration Cushion Dynamics
The important points on this plot are identified here:
B C
41
Vibration Cushion Dynamics
The mass on the cushion is changed and the
process (transmissibility plot) is repeated.
After 5 (min) plots, the data might look like this:
42
Vibration Cushion Dynamics
The data is then transferred to the
Amplification/Attenuation plot
43
Vibration Cushion Dynamics
Here’s how the data is used:
44
Time for Questions !
45
About WESTPAK, INC.
Two Locations:
Contact Us
46
THANK YOU !
Please Contact Us with any questions or testing
assistance needs. We are here to help you!
Herb Schueneman
Founder, Chairman
WESTPAK, INC.
47