Professional Documents
Culture Documents
Assessment PPT Final
Assessment PPT Final
Project/Assignments Nature
Design and Development of Audio and Data Management (ADMS) for Airborne Surveillance Platform
• Adaptation of ADMS for Airborne Early Warning and Control (AEW&C) Aircraft Technical
• Development of Radio Control Application for Flight Crew Radio of AEW&C Technical
Objective:
Basic ADMS Configuration
To evolve ADMS architecture
for Airborne Surveillance
Ethernet to
RS485/RS422
Serial
Converter
Platform
Lan X 4
E ADMS Functions:
T Tx
Radio
H
E CUIP (x 11)
Gateway
Rx
Mission
(x 11)
On-board inter-
CPU 1 (x 4)
R
Power
Supply
N
E
Audio Interface Card
communication and
T SATCOM Ku Band
190W
Hand Oxy Boom (x 2)
MIC MIC MIC Tx C Band (x 2) External communication
24 port Cockpit Intercom
Gigabit
Ethernet Gigabit Operator
Rx through selected radio/
CCCU Switch Ehernet Central
External Radio CSM Monitor (x 2)
E
Switch (x 2) Gateway
(x 4)
Radio Warning communication channels
Receiver (x 1)
T
CPU 1 H
E
Data and textual
R E Rest Crew (x 4)
Power N
E
T
E Rx conversations
Supply Rest Crew (x 4)
190W T R Tx
Control
Wi-Fi Module (x 1)
N
E
OWS (x 11)
of Radio
T
PCIe (x
11)
parameters
LAN(x 4)
Hard Disk 256 GB LAN (x 2) IP Phone (x 2)
On-board Video
Achievement:
Lab Level setup of ADMS successfully integrated and tested for four operators and six radios including IP Phones and Basic Phones.
4/10
Customized Client GUI design for ADMS
Objective:
To develop Client GUI for CUIP (Communication User Interface Panel) of ADMS.
CUIP Features:
Easy to Use
Allows the operator to:
Access and control radio parameters
Have intercom and communicate from air-to-ground as well as ground-to-air
Main Page of CUIP Front end
Use advance features like Video Conferencing, file sharing and Chat
Client GUI developed using Qt
Achievements:
Client GUI with soft PTT
functionality developed using QT
Radio Command and Control
integrated in the software.
Lab Setup with Server and Client End Radio Command and Control Page
5/10
Adaptation of ADMS for AEW&C
Objective:
To propose Interface Details and Hardware Configuration of
ADMS for AEW&C
Contribution:
Modified ADMS Architecture for AEW&C.
Radio Gateways enclosed Worked out power consumption and Mechanical mounting
in details of Line Replaceable Units (LRU).
Tough box chassis
Defined Interface details between various sub-systems of
ADMS and AEW&C.
Achievement:
Prepared preliminary Interface Control Document for
Mission System Rack A with five mission radios (Make:
Raytheon), two flight crew radios and five mission
Tentative Mounting for
Communication User Interface operators.
ADMS LRU Mountings in Rack A
Panel
6/10
ADMS configuration for AEW&C A/c 1129
EMG RX TX
REC O/P
OWS 1 V/UHF RADIO (TX &RX)
Rx
V/UHF RADIO (TX &RX) OWS 1 Rx ICFPA #1
BACK UP #3 ICFPA #1 #3
E1 AUDIO
Jack Box #2 ANT 4 Emg Ckt A
ANT 4
RCU CONTROL
RCU RS 485 RCU CONTROL
(SOFT) ACP #2 ALERT WARNG
CUIP #2
Tx & PTT Tx & PTT RF
RF
REC O/P (TX &RX) V/UHF RADIO (TX &RX)
OWS 2 Rx V/UHF RADIO OWS 2 Rx
ICFPA #2
#4 ICFPA #2 #4
RCU RS 485
Tx & PTT RF
(SOFT) ACP #4 ALERT WARNG
Tx & PTT RF RADIO (TX &RX)
V/UHF RADIO (TX &RX) CUIP #4 Rx
V/UHF RADIO
ICFPA #4
REC O/P
Rx
#6
ICFPA #4
Ethernet
GATEWAY #6
OWS 4 OWS 4
ANT 7 ANT 7
RCU CONTROL
E1 AUDIO RCU CONTROL
Jack Box #5 Emg Ckt A
Tx & PTT Tx & PTT
RCU RS 485
RF RF
(SOFT) Rx (TX &RX) Rx V/UHF RADIO (TX &RX)
ACP #5 ALERT WARNG V/UHF RADIO CUIP #5 ICFPA #5
ICFPA #5 #7
#7
REC O/P
OWS 5 OWS 5
RCU CONTROL RCU CONTROL ANT 1
ICP #1 ICP #1
AUDIO RF
(IN/OUT) Tx & PTT(COM3) V/UHF RADIO (TX &RX)
Rx (COM3) #1
ICP #2 ICP #2
RCU CONTROL
ANT 2
Tx & PTT(AUX)
ICP #3 ICP #3 RF
V/UHF RADIO (TX &RX)
AUDIO DISC Rx (AUX)
(IN/OUT) CNTRL ANT 1 #2
DISC
Tx & PTT(COM3) CNTRL
ICP #4 RF ICP #4
V/UHF RADIO (TX &RX) RCU CONTROL TACAN
Rx (COM3) #1
RCU
(HARD)
ICP #5 RCU CONTROL ANT 2 ICP #5 RCU CONTROL BUS
AUDIO
(IN/OUT)
Tx & PTT(AUX)
RF
V/UHF RADIO (TX &RX)
Cockpit Audio System RCU
Rx (AUX) #2
(HARD)
RCU CONTROL
TACAN
Cockpit Audio
RCU CONTROL BUS
System
Present MCS Airborne Configuration in AEW&C A/C ADMS Airborne Configuration in AEW&C A/C
7/10
Development of Radio Controller
for Mission Communication System (MCS) of AEW&C
Requirement:
Development of Radio Controller.
Achievement:
Identified hardware module for Radio Controller Unit with required number
of TTL and configurable serial ports.
Radio Command and Control implemented from Radio Controller to Radio
in lab setup.
Radio Controller Hardware Unit
8/10
Development of Radio Control Application for Flight Crew Radio
Objective:
To develop Radio Control Application for
Command and Control of Flight Crew
Radio (FCR)
Contribution:
Radio Control Application
developed for Flight Crew Radio which
controls the Selection of frequency,
AM/FM mode, T/R+G channel, Controlling of Two V/UHF Radios
by one Remote Control Unit
Squelch, Transmitter power,
Emergency Guard in the selected
V/UHF Radio.
Contribution:
Search and Rescue System Programming lab Setup
Programmed CABS units (ALS Decoder, PRB
and ELT) in CSAR mode.
Achievement: Flight Tested Search and Rescue System at
Search and Rescue system was successfully flight tested for
CABS and IAF Base Bhatinda in CSAR .
obtaining the ranges for voice and data in AEW&C Aircraft at IAF
SAR System Maintenance Activities
Base Bathinda and the results were accepted by IAF.
10/10
Future Work
Integration of Audio and Data Management(ADMS) in System test and Integration Rig(STIR) in existing
Mission System Rack A and testing
Ground & Flight testing of ADMS in AEW&C Aircraft
Server Software Development for Command and Control Unit of ADMS
Development of Indigenous Operational Data Link
Thank You