Professional Documents
Culture Documents
Petrophysics
Petrophysics
PTM-2
Falza Izza Wihdany
PETROPHYSICS WORKFLOW
Data
Input Data Interpretation
Correction
Input Data
Create Well • Zone marker needs to be defined
first to support interpretation,
Load Well Log data
(.Las) especially clay volume
calculation.
Input Zone Marker • Depth survey data is required to
calculate TVD and TVDSS from
Input Core Data
MD.
Input Depth Survey
Normalization
Some well log operator commonly already calibrated and corrected the log
from bore hole size and drilling mud. Before doing this step, we need to
read the log report.
INTERPRETATION
4 5
Lumping
3 Calculation
Cut-off
2 Determination
Water Saturation • Vshale cut-off
1 Porosity and
• Water Resistivity
• A, m, and n
• Porosity cut-off
• Sw cut-off
Water Saturation
Volume • Matrix density
Calculation • Wet clay density
• Dry clay density
• GR Shale Base Line
• GR Clean Base Line
• Match to Vcl from
XRD
SUPPORTING DATA
FOR INTERPRETATION
Dry Clay Reference
Dry Clay Density
Determine wet clay density by cross plot
Water Salinity and Resistivity
Selong-1 Flow Test Summary
Test Zone Depth Interval (ft) Cl- (ppm) Water Salinity (ppm)
Flow Test LTAF F1 5374 5384 10500 17272.5
Swabbing LTAF F3 5473 5487 11000 18095
Swabbing LTAF G1 5571 5578 12000 19740
Calculate Qv
Calculate B
Create relationship between Qv and PHIE
Crain’s Petrophysical Handbook:
Electrical Properties
Porosity Exponent (m) Saturation Exponent (n)
Cut-off
• Plot Qg vs. VCl
• Plot Qg vs. PHIE
• Plot Qg vs. SW