SKF Reliability Solutions to

Machinery and Maintenance

Vibration Problems

© SKF Group Slide 1

 Introductio
n

© SKF Group Slide 2

 CONDITION MONITORING OVERVIEW
Overview Detail Comments

Use corrective For measurable faults

Select appropriate No Consider condition
Measurable
tasks Or preventive Monitoring, otherwise
maintenance Consider alternatives
Yes
Identify parameters to be measured

Select Select measurement technique Fault and failure charact.

measurement Specific ISO standards
method Select measurement location Discussion with
maintenance personnel
Set initial alarm criteria

Take meas. and trend readings

Data collection
and analysis Compare meas. with alarm criteria

© SKF Group Slide 3

 CONDITION MONITORING OVERVIEW
Comments
Overview Detail Set up regular route

Take meas. and trend readings Schedule routes

Compare meas. with alarm criteria Take measurements

Data collection Compare to alarm criteria

and analysis of Outside
Compressor, Carry out diagnosis

Carry out progress

Perform diagnosis and prognosis

Low Improve
Confidence
diagnosis
Determine High Determine maint. action
maintenance Determine required maint. action
action, carry it out Carry out maint. action
Feed back results to history record Review alarm criteria

Review Review Confirm diagnosis after

maint.

© SKF Group Slide 4

 ENGINEERING DRAWING

© SKF Group Slide 5

 ENGINEERING DRAWING

© SKF Group Slide 6

Typical Vibration Analysis

 Overall Vibration (Trending)

 FFT Spectrum (Trending/Analysis)
- Velocity
- Acceleration (for high frequency)
- Resonance analysis
- Critical speed analysis
- etc.
 Time Waveform (Trending/Analysis)
 Phase Analysis
 Bump test

© SKF Group Slide 7

Experiences

 More than 15 years in condition monitoring and

vibration analysis
 has been completed many contracts vibration
analysis services throughout Indonesia which
includes oil and gas, Petro chemical, Pulp and
paper etc.

© SKF Group Slide 8

SKF @PTITUDE ANALYST SOFTWARE

© SKF Group Slide 9

 SKF Microlog offline data collector
External software modules GX

Conformance Route based Off route Run up FFT analyser

test data collection analyser coast down

2 channels, 40kHz
Frequenc
Bump test
y
Response
Function

Analysis & Microsoft™ SKF SKF SKF

Reporting Excel @ptitude @ptitude @ptitude
Module Monitoring Suite analyst Decision
Support

© SKF Group Slide 10

 Analysis tools
Time based
Waterfall Route
plots
Based Enveloped
Bode Data Quality spectrum
Collector Test
FFT
Variable
Analyser
speed
machinery

2 channels 40kHz
Frequency
Response
Function

Balancing

Orbits

Automatic
Report Digital
Generator recorder

© SKF Group Slide 11

 Engineer Qualification

• More than 5 years in condition monitoring

and vibration analysis
• ASNT Level I and II Technical Associates
of charlotte
• ISO 18436-2 standard Vibration Analysis
Level I and II

© SKF Group Slide 12