Professional Documents
Culture Documents
Sheet Metal: Analyze Formability - One Step
Sheet Metal: Analyze Formability - One Step
Purpose Objectives
Use the Analyze Formability – One-step Upon completion of this lesson, you will be able to:
command to flatten all or some faces of a sheet
metal part.
• Perform complete or intermediate unforming,
or flatten a sheet metal part.
Use the Analyze Formability – One-step command to flatten all or some faces of a sheet metal
part using FEM analysis and calculate the thinning, stress, strain, and springback to predict the
risk of forming.
You can:
• Output the flattened profile or springback faceted bodies for both intermediate unforming or
complete part unforming. You can also specify the target region and the unform region from
a different sheet body.
• Define different constraint types, both geometry and process, to control unforming.
ANALYZE FORMABILITY – ONE STEP
The flattened profiles are produced as spline curves and the analysis results are post-processed and
displayed in a color-coded plot mode. The analysis report is generated based on the subsequent
results.
The Onestep Unform feature which saves your inputs and settings, is listed in the
Part Navigator, and can be edited if required. The data is retrieved when you
reopen the part file and run the Analyze Formability – One-step command.
Summary: ANALYZE FORMABILITY – ONE STEP
Use Analyze Formability – One step command to flatten all or some faces of a sheet metal part using
FEM analysis. Use it to calculate the thinning, stress, strain, and springback.