Professional Documents
Culture Documents
Sniffer For Detecting Lost Mobile
Sniffer For Detecting Lost Mobile
Mobile
4/3/2019 1
Contents
• Introduction
• What Sniffer is ?
• IMEI
• Design
• Working
• Advantages
• Disadvantages
• Conclusion
• References
4/3/2019 2
Introduction
• Each and everyday thousands of mobile get misplaced or lost,
through effective way for the blocking of the lost mobile to prevent
unauthorized person from making and receiving the calls has been
done by the manufacturers of the mobile with the help of
International Mobile Equipment Identifier (IMEI) has been done but
however there has been no development or very little progress for
the detection of the misplaced mobile phone.
• For the detection of lost mobile SNIFFER plays a vital role .The sniffer
device has to be designed precisely and size should be reduced for
easy mobility for the purpose of detection .
4/3/2019 3
What Sniffer is ?
• The device include a mobile Base station that includes Sniffer Base
station, Unidirectional antenna , Tracking software.
Identify-GSM/DCS/PCM
The device can be called as a mobile base station that includes the
following important components:
• Sniffer base station
• Unidirectional antenna
• Tracking software
4/3/2019 6
Sniffer Base Station
Small base station
Include transceiver section
Operated at frequency (900mhz which is VHF range)
OSCILLATOR circuit-for frequency range
Cooling is Important that has to be provided to the
circuit
Low power transmitter (help in nature)
4/3/2019 7
Unidirectional Antenna
Act as a eyes for the sniffer
Antenna is a device works at
specified frequency
Transmitting & receiving data
signal
Transmit power
Used to show radiation pattern
4/3/2019 8
Radio Pattern
Act as a database
4/3/2019 10
Tracking software
Lost Mobile
4/3/2019 11
Working of Sniffers
The Working of sniffers is of two phases
4/3/2019 12
Before Sniffer Increases the Frequency
4/3/2019 13
Before Sniffer Increase the Frequency
• The EIR is located at MSC and it contains the contains the IMEI of the
lost mobile.
4/3/2019 14
After Sniffer Increases the Frequency
• The information from this communication is fed to sniffer device and
start to locate the mobile phone.
• The connection between BTS and device is lost due to EIR request.
• The lost device search the device to get locked and send the signal
which is received by sniffer device and connection between them is
established.
• Now IMEI of lost device is validated with stored IMEI and then
connection is established.
4/3/2019 15
Contd..
• After that the location is traced. During this process, if another device
try to connect with sniffer then the connection is denied.
• This can’t be done with the GPS because the sniffer can only work
with frequency only used with operators.
• Now the antennas are used to track different positions of the lost
device.
4/3/2019 16
After Sniffer Increases the Frequency
4/3/2019 17
Advantages
• This method is used for finding the lost mobiles effectively
• Cost effective
• Easy to design
4/3/2019 18
Conclusion
• “Sniffer for the detection of lost Mobile phones” paves a way by
means of which the lost mobile phones can be recovered. But the
process of detection is yet to be developed through the software.
4/3/2019 19
References
• Schiller , “Mobile Communication", Pearson Education 1 Edition, 7th
reprint-2003.
• John D Kraus, “Electromagnetics", MH,
• Jordan et al, “Electromagnetic waves and radiation system” , Prentice
Hall
• www.gsmworld.com
• http://ericsson.com
• http://iec.org
4/3/2019 20