Professional Documents
Culture Documents
Waterproof Range Painter
Waterproof Range Painter
Waterproof Range Painter
Concrete Mix
2
What is Concrete Mix?
SBR latex used for general repairs and economical waterproofing.
When to use?
It is used in Old structure for repairing and in New house for
waterproofing.
Target Group
Mason / Civil Contractors / Painter /
Home Owner Engineer / Architect
Painting contractors
3
REPAIRS
Where to use?
For concrete and plaster repairs
Spalled concrete floor / slab Spalled concrete beams Plaster cracks > 5mm
4
Spalled concrete column Chajja
Waterproofing
Where to use?
For terrace, bathroom & balcony waterproofing
Bond coat
Where to use?
For bonding old to new concrete and plaster
Why to use Concrete Mix?
Bonds strongly to concrete, masonry, stonework, plasters, cementitious
surfaces
Economical
Dosage
Coverage
Waterproofing coating: 22-25 sq ft/L in 2 coats
Mortar Modified: 6-7.5 L of the product per 50 kg of cement
Bonding agent : 45-50 sq ft/L per coat
8
How to Apply?
Bonding Primer
10
Waterproof Coating
Mix Product : Cement in the Mix for 2-3 minutes to avoid air entrapment.
ratio 1:1.5 by volume. Slowly add cement to the product until the
required consistency is achieved.
2. Color White
Shelf Life
1year
Packaging
1, 5, 10, 20 Ltrs
12
Nerolac
Waterproof X
Crack Filler
13
What is Crack Filler?
It is a single component ready to use flexible product for filling
the cracks in plastered surfaces.
Where to use?
Used in Internal and External plastered brick masonry wall cracks
of up to 5mm width.
Target Group
Home-owner Painter
14
Why to use
15
How to Apply?
Surface must be free from dust, oil, Fine hair line cracks must
For filling the product on the
grease, and loose particles etc. be widened up to 1 mm
internal surface, existing POP or
Moisten the surface before applying minimum by using
painter’s putty must be removed till
the product. scrapper and then filled.
plaster surface is exposed.
25 to 30 RMT/kg for
3. Coverage 5mm D * 5 mm W
Packaging
1 kg & 5 kg
17
Nerolac
Waterproof X
1K Damp Block
18
What Who
It is a polymer modified cement
based damp proof coating
When
Home-owner
Can be used to get rid of
efflorescence, ground rising
dampness and paint-peel off
due to moisture.
Painter 19
Where
Interior/ Exterior
walls affected by
efflorescence (not
directly exposed to
exterior)
It is a single component
Crack bridging of hair line product and hence easy to
cracks. use. 21
Application
Primer
1K DB putty
Ensure that the system covers an area well Apply putty-primer and suitable top coat.
22
over and wide of the affected area
Cleaning Repairing
Remove the old paint, Re-plaster if existing
putty or existing POP plaster is in very poor
using chisel, wire brush. condition.
Ensure that one should Repair the concerned
reach to the cement area to stop the source
plaster for product of dampness.
application
Coverage Packaging
80-90 sft / kg / coat for Primer 2 kg, 5 kg, 10 kg
15 sft / kg / coat for 1K Damp
block putty application
23
Precautions
Ceiling
25
What is 2K Damp block?
It is a two component cementitious & acrylic flexible
waterproofing product.
When to use?
It can be applied to Old and New concrete structures that are
structurally sound and strong.
Target Group
Mason / Civil Contractors / Painter /
Home Owner Engineer / Architect
Painting contractors
26
26
Where to use?
Surface must be free from dust, oil, Shake well the liquid
Any damaged surface must
grease, and loose particles etc. component to a homogenous
be repaired by using polymer
Moisten the surface before applying milky color, transfer entire
modified mortar.
the product. quantity of liquid component
into a suitable clean mixing
vessel, gradually start addition
of powder component under
constant mixing for 3- 5
minutes to a homogeneous &
uniform free flowing slurry.
Apply the mixed material for two coats over Coverage: 6-7sft / kg in 2 coats
the set concrete slab by a masonry brush.
Mix the entire quantity of both the components at one go.
Do not use powder with the liquid other than the powder
accompanied with liquid, it will affect the performance.
Do not add water for dilution.
Do not flood or over expose the treated surface to water until
it is completely cured.
WaterproofX
Cement Mix LW+
32
What is CEMENT MIX LW+?
An integral waterproofing compound that makes concrete
& plaster cohesive and prevents segregation.
When to use?
It is used in New Construction as a preventive measure.
Target Group
Home Owner Mason / Civil Contractors Engineer / Architect
33
How to use?
Mix cement & aggregates to concrete mixer as per the mix design,
mix in dry state for 1–2 minutes.
Start addition of 75–80% mixing water & mix for 2-3 minutes.
34
What it does?
Better workability of freshly mixed concrete/ plaster/ mortar by reducing
water to cement ratio at optimum dosages
Shelf Life
2 years
Packaging
1, 5, 10, 20 Ltrs
36
Precautions
37