Professional Documents
Culture Documents
Presentation On Manufracture of Turbogenerator
Presentation On Manufracture of Turbogenerator
Turbo Generator
contents
Introduction
Working principle of turbo generator
Types of turbo generator
General components of turbo generator
Manufacturing process of conductors
Testing of turbo generator
Introduction
A turbo generator is a mechanical device that is used to produce electrical power. It
does so by turning a large turbine that is connected to a generator, which converts
mechanical energy into electrical energy.
They are mostly used as large capacity generator driven by steam/gas turbine. They are
of three types namely:-
1. Steam turbine generator
2. Gas turbine generator
3. Hydro turbine generator
Working principle of
turbo generator
The generator works on the principle of
ELECTROMAGNETIC INDUCTION. A turbo generator is
a turbine directly connected to the shaft of an electric
generator, when a turbine is attached to the electrical generator
the kinetic energy of the steam pushes against the fan-type
blades of the turbine, causing the turbine, and therefore the
attached rotor of the electrical generator, to spin and produce
electricity.
Working principle of Turbo Generator
Types of turbo
generator
According to cooling system turbo generator are divided as-
i. THRI
ii. TARI
iii. THDI
iv. THDD
v. THDF
vi. THFF
T = turbo generator
H/A = the cooling media used i.e. hydrogen gas or air.
R/D/F/I = the type of cooling of rotor i.e. radial, indirect, forced, direct
I/D/F = the type of cooling of stator i.e. indirect, direct, forced.
The General Components
of a turbo generator:-
Stator Rotor
Stator Rotor shaft
frame Rotor
winding
Stator
core Retaining
ring
Stator Rotor
winding wedges
Bushing Rotor fan
Excitation
system
Stator frame
MECHANICAL TEST:
Vibration test
Temperature test
Helium test
Thank you