Professional Documents
Culture Documents
IRAT Handover Test Result (From HW 3G To NSN 2G) : Huawei Technologies RNP&O Team 14, June, 2010
IRAT Handover Test Result (From HW 3G To NSN 2G) : Huawei Technologies RNP&O Team 14, June, 2010
According to the frequency and PSC, We can make sure that the handset camps on 3G.
According to the signaling, the outgoing call setup succeed
Active compressed mode when the coverage below the threshold
The handset active compressed mode and start to measure the GSM neighbor cells when event 2D
occurred.
Start the handover when the target GSM cell is ok
When the GSM coverage is higher than the threshold (-95dBm), the RNC sent message “Handover
from UTRAN Command” to UE and ask the UE to start handover. If the handover is successful, the
UE will send message “Handover Complete”. When handover started, the handset left 3G network.
GSM information after handover
When we dropped the call, the UE camped on 2G first and started cell reselection when received
the 2G system information.
Cell reselect from 2G to 3G in idle mode(2/2)