Professional Documents
Culture Documents
Title: Design and Testing of Dualband Mobile Phonejummer With Cell Phone Detector
Title: Design and Testing of Dualband Mobile Phonejummer With Cell Phone Detector
Title: Design and Testing of Dualband Mobile Phonejummer With Cell Phone Detector
Technology Department of
Electrical and ComputeR
Engineering Communication stream
18/08/2019 1
Group Members
Name Id.no
1. Mintesinot Basha……………...Ramit/1379/08
2. Abinet Bergene………………….Ramit /074/08
3. Muluken Teka…………………….Ramit/0079/08
4. Amanuel Hadaro……………….Ramit /197/08
5. Nesreden Hamiza………………Ramit /1782/08
6. Tigist Kassu…………………………Ramit /1447/08
18/08/2019 2
OUTLINE
• Introduction
• Statement of problem
• Objectives of the project
• Significance of the project
• Literature review
• Methodology
• Expected result
• Work plane
18/08/2019 3
INTRODUCTION
• This report presents the design, implementation, and testing
of a dual band cell phone jammer and mobile phone
detector.
• This jammer works at GSM900MHz and GSM1800MHz
simultaneously.
• A GSM Jammer is a device that transmit signal on the
same frequency at which the GSM system operates.
• Mobile detector can sence the precence of activated mobile
phones even if a mobile phone is in silent mode.
18/08/2019 4
STATEMENT OF THE PROBLEM
18/08/2019 5
OBJECTIVE OF THE PROJECT
General objective
18/08/2019 6
Specific objective
18/08/2019 8
GSM jammer also used in Gas stations where radio
signal equipment is not needed.
18/08/2019 9
LITERATURE REVIEW
The invetor of mobile phone jammer was the
physicist Jemes Maxwell.
IN 2013 in Arbaminch University two students
Kokeb G/Medhin and Kante Ledamo where tried to
do single band cell phone jammer or GSM900MHz
jammer with simulation only.
what make us different is we work on dual band
cell phone jammer (GSM900MHz and
GSM1800MHz) with cell phone detector both on
simulation and hardware.
18/08/2019 10
Methodology
Start
Literature
review
Collecting and
organizing data
Understanding and
analysing data
End
Mathematical
modelling
No Yes Hardware
Simulation result
18/08/2019 11
SCOPE
• In our design the jamming distance is about minimum 10m and
detector range is 2m.
• The jamming technique we used is Denial of Service with jamming
frequency
GSM900 = 935-960MHz
GSM1800 = 1805-1880MHz
18/08/2019 12
Expected result
After we accomplish this project we expect:
18/08/2019 13
Work plan schedule
Tasks March 2019 April 2019 May 2019 June 2019
Problem
identification
Simulation and
collecting Hardware
components and
presentation
18/08/2019 14
Reference
Akaiwa, Y. (2008) Introduction to Digital Mobile
Communication, 2nd Edition. ISBN: 978-1-119-04110-
8[Online]Available:
http://eu.wiley.com/WileyCDA/WileyTitle/productCd-
1119041104.html (June 12, 2016).
18/08/2019 15