Professional Documents
Culture Documents
Birla Institute of Technology Energy Audit
Birla Institute of Technology Energy Audit
ENERGY AUDIT
An energy audit is an inspection survey an
analysis of energy flows, for energy
conservation in a building, process or system
to reduce the amount of energy input into
the system without negatively affecting the
output(s).
What is the purpose of an energy audit?
how and where energy is used and to identify
methods for energy savings.
This energy audit of the common room of the
girls’ hostel area was carried out by us (pallavi
and priya)
This report is just one step, towards our
destination of achieving energy efficiency
we would like to emphasis that an energy audit
is a continuous process.
We have compiled a list of possible actions to
conserve and efficiently utilize our resources and
identified their savings potential.
Survey and data collection.
Identification of equipments.
Natural and artificial ventilation.
Calculated load and consumption comparison.
Research energy efficient improvement.
Results compilation.
Recommendation.
Sales
40w/h
70w/h FAN
TV
79w/h TUBELIGHT
FAN
Type of fan used=ceiling fans
Number of fans available in common room=32
Number of fans in good condition(working)=23
Number of fans not working=9
Electricity consumed by one fan in one hour=70watt
ARTIFICIAL LIGHT
Type of light used=florescent tube lights
Number of tube lights available=20
Number of tubelights in good condition=13
Number of tube lights not working=7
Electricity consumed by one tubelight in one hour=40watt
TV
42 inch display led tv
Electricity consumed by one led tv in one hour=79watt
SWITCH BOARDS
Four switchboards
Three 16A power plug
DOORS
3 doors are there in common room
One door is of width=1.9m
And other two doors are of width=1.2m
Windows
14 windows are there in common room
12 windows are of width=1.82m
2 windows are of width=1.52m
Unplug and switch off the entire electrical device of
appliance that is not in used to reduce no-load losses.
Clean the light fixtures regularly as a heavy coat of dust can
block 50% of light output.
Clean the fans regularly as heavy coat of dust in fan blades
reduces motor efficiency and output.
In this layout according to the site review, it
can be seen that tube light is used a lot.
It is suggested for replacement of tube light
with LED light.
The LED has two years of warranty and it also
saves the consumption of units compare to
the CFL and tube light.
CURRENT SCENARIO
CURRENT SCENARIIO
44 Kwh
4374.720