Professional Documents
Culture Documents
Tai Lieu Komatsu PC450
Tai Lieu Komatsu PC450
PC450-7 1
SERVICE MODE
To access the service mode
Key in the following :-
PC450-7 2
SERVICE MODE
1. Monitoring
2. Abnormality Record
3. Maintenance record
4. Maintenance mode change.
5. Phone number entry
6. Default
7. Adjustment
8. Cylinder cut out mode
In the flashing yellow box key in the number selection or use the
up/down arrow to move your selection and then press return.
PC450-7 3
SERVICE MODE
1. Monitoring measurement items
Within the monitoring function we can monitor
up to four measurement items on the machine
However for a fast screen update use only on
a single item. Only 2 measurement items can be
displayed in conjunction with an On/off display
PC450-7 4
SERVICE MODE
1. Monitoring measurement items
PC450-7 5
SERVICE MODE
1. Monitoring
On/Off display items
1 2
PC450-7 7
SERVICE MODE
There are 72 electrical failure codes and 9 mechanical
codes
6 164 h
PC450-7 9
SERVICE MODE
3. Maintenance Record
PC450-7 12
SERVICE MODE
6. Default Setup.
When the default setup screen is selected it allows to change
the settings that the machine will start up in every time it is
switched on.
The “Key-on mode” allows the selection of the mode each
for operator preference at start up.
Default value
sets to the
current set value
PC450-7 13
SERVICE MODE
6. Default Setup.
The other default setup screens are for language (Japanese/English)
Unit (SI unit, Metric, Imperial)and selection of
“with or without service circuit” .
If the Service Circuit is not selected then the Icon is
removed from the standard screen at the mode symbol.
equipped
PC450-7 14
SERVICE MODE
7. Adjustment.
From within the service mode the adjustment section allows
the service technician to carry various adjustments to the
machines performance.
PC450-7 15
SERVICE MODE
7. Adjustment. Pump absorption torque
Due to machine tolerances the pump absorption torque can
be adjusted to suit the machine.
Using the Up/Down button selection can be made to the torque
absorbed by the pump.
PC450-7 16
SERVICE MODE
7. Adjustment. Service current adjustment
During compound operation between the boom raise spool and
the service spool the distribution of the flow from the
hydraulic pump would choose to go to the service spool ,
therefore the ability to alter the flow distribution is given in
the monitor panel . By selecting the different values below we alter
the balance of flow between the spools.
370
371
372
373
PC450-7 17
SERVICE MODE
7. Adjustment. SMR adjustment
By inputting 90 in the flashing yellow box in the adjustment screen
the SMR adjustment screen can be selected.
To activate the function Press up arrow together with 1-2-3
in sequence.
This function is required if the monitor panel is replaced and
the Current hours are transferred from the old Monitor panel.
You cannot decrease the hours and the monitor does not go back to
zero hours if you go past 99999hours.
The SMR can be checked on the machine with the key switch in the
off position. To activate hold the Up Arrow button and the Return button
pressed at the same time for 3-5 seconds to activate .
TEST screen mode can be operated by pressing Button 2 with the return key
PC450-7 20
Return to Menu Click box
PC450-7 21