Professional Documents
Culture Documents
Chemical Inventory Management and Control Solution: ABB Upstream Oil & Gas Solutions
Chemical Inventory Management and Control Solution: ABB Upstream Oil & Gas Solutions
Chemical Inventory Management and Control Solution: ABB Upstream Oil & Gas Solutions
© ABB
October 5, 2019 | Slide 1
Chemical inventory management and control
Meeting agenda
Introduction
Industry challenges
Our goals to address industry challenges
The ABB Chemical Inventory Management and Control Solution
Open discussion / questions
© ABB
October 5, 2019 | Slide 2
Chemical inventory management and control
Industry challenges
Challenges
© ABB
October 5, 2019 | Slide 3
Chemical inventory management and control
Our goals towards addressing industry challenges
Our goal is to provide operating companies simple to use tools they need in order to be more
efficient in day to day operation of managing and controlling their chemical inventory and usage.
A built for purpose system with options for expansion.
A system that optimizes production, integrity and safety.
Provide companies cost savings, operational efficiency and a return on investment through a solid
collaborative automation approach.
© ABB
October 5, 2019 | Slide 4
Chemical inventory management and control
The ABB Solution
Our solution is a purpose built modular management and control system designed to provide
operational efficiency in chemical usage and inventory.
© ABB
October 5, 2019 | Slide 5
Solution modes of operations
Manual mode
© ABB
October 5, 2019 | Slide 6
Solution modes of operations
Ascending mode (corrosives)
Inject mode: Auto scale – Type: Ascending injection – Typical Use: Inhibitors
1100 35
30 Lo flow target
900
25 Hi flow target
700
20 Flow rate
500 Flow rate min: 600 Hi chem flow
Chem rate min: 20
15
Low chem flow
300 10 Chem rate
100 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5
-100 0 0 0 0 0 0 0
© ABB
October 5, 2019 | Slide 7
Solution modes of operations
Descending mode (foamer)
Inject mode: Auto scale – Type: Descending injection – Typical Use: Foamer agents
© ABB
October 5, 2019 | Slide 8
Solution modes of operations
Methanol mode
Inject mode: Auto scale – Type: Methanol injection – Typical Use: Freeze off prevention
© ABB
October 5, 2019 | Slide 9
Important notices
The information in this document is subject to change without notice and should not be construed as a
commitment by ABB. ABB assumes no responsibility for any errors that may appear in this document.
In no event shall ABB be liable for direct, indirect, special, incidental or consequential damages of any
nature or kind arising from the use of this document, nor shall ABB be liable for incidental or
consequential damages arising from use of any software or hardware described in this document.
© Copyright 2015 ABB. All rights reserved.
© ABB
October 5, 2019 | Slide 10
© ABB
| Slide 11