Professional Documents
Culture Documents
Fpsos Replicantes: Gas Compression Plant
Fpsos Replicantes: Gas Compression Plant
MODES OF OPERATION
Mode A: Injection of all gas
Main compressors can run in any configuration (only 1 compressor, 2 of 3 and all 3
compressors), therefore it shall be foreseen the load transfer from one compressor
to another.
Injection compressors can run in any configuration (only unit A, only unit B or
both), therefore it shall be foreseen the load transfer from one compressor to
another.
Mode A: Injection of all gas – CO2 removal Unit is
bypassed
HC+CO2
HC Exp-C
MAIN CO2
NOT OPERATING
Exp-B
MAIN
DEW POINT
Exp-A
EXPORTATION
MAIN
GAS INPUT
CO2 INJ-A
WAG WELLS
CO2 INJ-B
CO2 INJECTION
Mode B: HC exportation plus CO2 Injection:
Gas treated by CO2 removal unit is used for fuel gas, gas lift and the excess gas is
exported.
CO2 is injected.
Main compressors can run in any configuration (only 1 compressor, 2 of 3 and all 3
compressors), therefore it shall be foreseen the load transfer from one compressor
to another.
CO2 compressors can run in any configuration (only unit A, only unit B or both),
therefore it shall be foreseen the load transfer from one compressor to another.
Injection compressors can run in any configuration (only unit A, only unit B or
both), therefore it shall be foreseen the load transfer from one compressor to
another.
Mode B: HC exportation plus CO2 Injection
HC+CO2
HC Exp-C
MAIN CO2
NOT OPERATING
Exp-B
MAIN
DEW POINT
Exp-A
MAIN DEHYDRATION
GAS INPUT
CO2 INJ-A
WAG WELLS
CO2 INJ-B
CO2 INJECTION
Mode B: HC exportation plus CO2 Injection
HC+CO2
Exp-C
HC
MAIN
CO2
NOT OPERATING
Exp-B
MAIN
DEW POINT
Exp-A
MAIN DEHYDRATION
GAS INPUT
CO2 INJ-A
POÇOS WAG
CO2 INJ-B
Each Injection compressor runs with a different gas (Unit A runs with HC and Unit B
runs with CO2)
Main compressors can run in any configuration (only 1 compressor, 2 of 3 and all 3
compressors), therefore it shall be foreseen the load transfer from one compressor
to another.
CO2 compressors can run in any configuration (only unit A, only unit B or both),
therefore it shall be foreseen the load transfer from one compressor to another.
Mode C: Injection of HC and CO2 – Separated wells
HC+CO2
HC Exp-C
MAIN CO2
NOT OPERATING
Exp-B
MAIN
DEW POINT
Exp-A
MAIN DEHYDRATION
GAS INPUT
CO2 INJ-A
WAG WELLS
CO2 INJ-B
Part os gas from Main Compressors is bypassed from CO2 removal unit. On this mode,
Exportation compressors can run with different gases (e.g.: Unit A runs with HC and Unit C runs
with HC+CO2).
Suction pressure of Exportation compressors are distinct between the ones that are running with
HC+CO2 and the ones running with HC.
Main compressors can run in any configuration (only 1 compressor, 2 of 3 and all 3 compressors),
therefore it shall be foreseen the load transfer from one compressor to another.
Exportation compressors Unit B and Unit A can run in paralell or compressors Unit B and Unit C
can run in paralell. Therefore it shall be foreseen the load transfer from one compressor to
another (B+A or B+C).
CO2 compressors can run in any configuration (only unit A, only unit B or both), therefore it shall
be foreseen the load transfer from one compressor to another.
Each Injection compressor runs with a different gas (Unit A runs with HC+CO2 and Unit B runs
with CO2).
NOT OPERATING
Exp-B
MAIN
DEW POINT
Exp-A
MAIN DEHYDRATION
GAS INPUT
CO2 INJ-A
WAG WELLS
CO2 INJ-B
HC+CO2
Exp-C
HC
MAIN
CO2
NOT OPERATING
Exp-B
MAIN
DEW POINT
Exp-A
MAIN DEHYDRATION
GAS INPUT
CO2 INJ-A
WAG WELLS
CO2 INJ-B
HC+CO2 Exp-C
MAIN HC
CO2
NOT OPERATING
Exp-B
MAIN
DEW POINT
Exp-A
MAIN DEHYDRATION
GAS INPUT
CO2 INJ-A
WAG WELLS
CO2 INJ-B
HC+CO2
Exp-C
HC
MAIN
CO2
NOT OPERATING
Exp-B
MAIN
DEW POINT
Exp-A
MAIN DEHYDRATION
GAS INPUT
CO2 INJ-A
WAG WELLS
CO2 INJ-B
NOT OPERATING
Exp-B
MAIN
DEW POINT
Exp-A
MAIN DEHYDRATION
GAS INPUT
CO2 INJ-A
WAG WELLS
CO2 INJ-B
NOT OPERATING
Exp-B
MAIN
DEW POINT
Exp-A
MAIN DEHYDRATION
GAS INPUT
CO2 INJ-A
WAG WELLS
CO2 INJ-B
NOT OPERATING
Exp-B
MAIN
DEW POINT
Exp-A
MAIN DEHYDRATION
GAS INPUT
CO2 INJ-A
WAG WELLS
CO2 INJ-B