Professional Documents
Culture Documents
NSCP
NSCP
Loads
Al-ayyoubbie T. Sabban
NSCP
National Structural Codes of the
Philippines
Occupancy Category
Nature of Occupancy
Machinery
The weight of machinery and moving loads shall be increased
as follows to allow for impact
1. Elevator Machinery 100%
2. Light machinery, shaft or motor driven 20%
3. Reciprocating machinery or power driven units 50%
4. Hangers for floors and balconies 33%
Wind Loads
207.1.4.1 Main Wind-Force Resisting
System
The wind load to be used in the design of the
MWFRS for an enclosed or partially enclosed
building or other structure shall not be Jess than 0.5
kPa multiplied by the area of the building or
structure projected onto a vertical plane normal to
the assumed wind direction. The design wind force
for open buildings and other structures shall be not
less than 0.5 kPa multiplied by the area Af as
defined in Section 207 .3.
Types of Building
a. 2.775m
b. 0.375m
c. 2.025m
d. 2.815m
QUESTION
a. Beam First
b. Slab First
c. Does not matter which is poured first
d. Must be poured at the same time
Walls
BEARING WALL
Is a wall designed to
resist lateral forces
parallel to the place of
the wall
SHEAR WALL
a. Column
b. Footings
c. Pile Cap
d. Slab
QUESTION