Professional Documents
Culture Documents
SLS
SLS
Rapid Prototyping
Carnegie Mellon
Andy Sadhwani
Selective Laser Sintering (SLS)
Manufacturing Technique
Made with Plastic/Elastomer Powder
Sample built layer by layer
Horizontal Slide with Fixed Vertical Movement
Powder stays on table
Filetype ‘.stl’ used - structural triangle language
Finished sample cools for 12-24 hrs then pulled
out of Powder
SLS Machine
SLS Powder
SLS con’t
Powder
– Nylon-11
For High Strength and Elasticity
– Nylon-11 with 50% Glass Reinforcement
– Nylon-12
Finer Surface Quality but lower elasticity
– Elastomer
Simulate Rubber-Like Products
– Strain and Tolerances Available on Website
SLS con’t
No Limitation to Maximum Size
– Sintered Parts can be Glued Together Easily
Providing High Strength
– Single Part can be 30cm x 30cm x 60cm
Minimum Wall Thickness
0.85 [mm] for PA11
1.00 [mm] for PA11-GF50
0.65 [mm] for PA12
0.60 [mm] for Elastomer
Example of SLS Part (Drill)
Contact Information
Mareco bv Rijnaakkade
www.marco.nl