Professional Documents
Culture Documents
Tugas Sistem Perancangan Mesin (Autosaved)
Tugas Sistem Perancangan Mesin (Autosaved)
STRUKTUR FUNGSI
Saddle Speda Polygon
Liza Mulyadiana
Average Improve Productivity By KOM-MICS data (Cutting Time Δ 11 % Down Time Δ 17%) Δ 27 %
April 19 Machining time Δ 11 %
Increase machining feed and speed if cutting force is lower Increase machining feed and
After Example for Boom PC Series
Repair Feed
Repair Feed
Cycle
ATC,APC
5 Minutes
3,5 Minutes
Non
Cut
9% 12%
AVERAGE
AVERAGE
Stop Cutting Time
Non
Cut
Non Coating Insert Coating Insert 5%
29%
Down time Δ 17% Reduce Dandori Hour by using 2 table and change the 5%
Reduce clean-up time by short-cut chip Make a Multiple Jig to
Stop In Program
Stop In Program
2 Tables
Stop for setting
44%
29%
Reduce Tool Changing by Reduce Thrust Load by
Change
New Position 52,5 mm 54 mm
Remote
Change to be 2
Before Condition, for
step for dividing
the tool is only handling
the cutting angle
using 1 step
and cutting load New position of tool has a
step 1,5 mm