Professional Documents
Culture Documents
Auma Germany Actuator
Auma Germany Actuator
Auma Germany Actuator
2
AUMA provides a complete range of electric actuators
3
AUMA offers three actuator control configurations
Conventional actuator
•Limit switches
•Torque switches
Without controls – AUMA NORM
Conventional actuator
•Limit switches
•Torque switches
Conventional controls
•AUMA Matic (AM)
Non-intrusive actuator
•MWG – encoders sense position & torque
Microprocessor- based controls
•AUMATIC (AC)
4
A solution for any environmental / ambient application
Watertight applications
•NEMA 4 / 4X
•IP67
Explosionproof applications
•FM
•CSA
•ATEX
•Other global approvals
Submersible applications
•NEMA 6
•IP68
5
Model SA multiturn actuator
Drive - motor (or hand wheel) drives a worm/worm wheel gearset which turns a
hollow output drive shaft.
6
Model SA multiturn actuator
• 11 sizes
• speed from 4.8 up to 216 rpm (at 60 Hz, in 12 increments - speed selections
reduced for larger actuators)
7
SA Multiturn Actuator coupled with GK or GHT Multiturn Gearbox
SA actuator / GK gearbox
Up to 11,900 ft lb torque
Up to 309,000 lb thrust
SA actuator / GHT gearbox
Up to 60,000 ft lb torque
Up to 900,000 lb thrust
8
Plug & socket electrical connection
9
Easily to set-up / commission
10
User friendly design offers actuator configuration flexibility
11
SA actuators can be furnished as ‘non-intrusive’ actuators
12
Non-intrusive actuators - 3 ways to set parameters
AF
A Also available:
LE
D / DD / B3D
IB3
AK
14
SG05.1 – 12.1 Quarterturn Actuator
16
AUMA GS worm gearbox models
12 sizes
GS50.3 – GS250.3
GS 50.3 – 125.3 GS315 – GS500
GS630.3
Output torque up to 498,000 ft lbs
Wide variety of primary spur gear
reducers
GS 160.3 – 250.3 VZ on GS100.3 – GS125.3
GZ on GS160.3 – GS630.3
GS 315 – 500
GS630.3
17
Model GS worm gear - Applications
Manual operator
Meets AWWA Standard C504-06 for manual butterfly valves (when properly
selected)
18
SA/GS Quarterturn Actuator
Combined features of SA
actuator and GS worm gearbox
19
AM integral actuator controls
20
AM integral actuator controls
Standard features:
reversing starters
plug & socket electrical connection – at field
terminals and NORM actuator
power supply / transformer
phase correction
monitor relay
local controls
standard interface (contact closure/discrete
inputs)
Options:
optional control system interfaces
Positioner – accepts 4-20 mA signal
Pulse timer board – extends operating time
Digital communications boards
solid state starters
21
AM integral actuator control package
Local controls:
3 pushbuttons (OPEN – STOP – CLOSE)
3 indicating lights (OPEN – FAULT – CLOSED)
Selector switch (LOCAL – STOP – REMOTE)
22
AM with fieldbus
23
AM Triple Play with fieldbus
Standard features:
Plug & socket electrical connection at field terminals and at NORM actuator
power supply / transformer
phase discriminator DeviceNet
local controls
Option:
solid state starters
24
AC01.2 integral actuator controls
25
AC01.2 actuator controls
Standard features:
Reversing starters for motor control
Plug & socket electrical connection at field terminals and at NORM actuator
Power supply / transformer for control power
Phase correction
Monitor relay
Programmable output relays (45 parameters available)
standard interface (contact closure / discrete inputs)
Local controls with LCD display
Diagnostics
Operational data logging
Electronic nameplate
Configurable via local controls or Bluetooth
Options
Adaptive positioner
Solid state starters
Digital communications / fieldbus / two-wire control
26
AC01.2 - local controls
Display on LCD
Valve position indication
Running indication
Setting menu
Status indication
Diagnostic information
27
AC01.2 with fieldbus
28
Commissioning / programming
29
Additional user-
friendly features
30
Double-seal at terminal compartment
31
AM and AC.....flexible mounting
32
Remote Mounting
33
A solution for any valve automation application
Spur gearboxes
35