Professional Documents
Culture Documents
003a - Refresher SPDI
003a - Refresher SPDI
003a - Refresher SPDI
INSTALLATION
SET A
1. R.A. 9514 is also known as
a. Combustible fiber
b. Combustible, flammable or inflammable
c. Combustible Liquid
d. Corrosive Liquid
7. Descriptive of materials that are easily
set on fire.
a. Combustible fiber
b. Combustible, flammable or inflammable
c. Combustible Liquid
d. Corrosive Liquid
8. Any readily ignitable and free burning fiber such
as cotton, oakum, rags, waste cloth, waste paper,
kapok, hay, straw, Spanish moss, excelsior and other
similar materials commonly used in commerce.
a. Condensation c. Vaporization
b. Distillation d. None of the above
14. The process of first raising the temperature
in separate the more volatile from the less
volatile parts and then cooling and condensing
the resulting vapor so as to produce a nearly
purified substance.
a. Condensation c. Vaporization
b. Distillation d. None of the above
15. A continuous passageway for the
transmission of air.
a. Powder c. Gust
b. Chemical compound d. Dust
16. A finely powdered substance which,
when mixed with air in the proper
proportion and ignited will cause an
explosion.
a. Powder c. Gust
b. Chemical compound d. Dust
17. An extremely hot luminous bridge formed
by passage of an electric current across a space
between two conductors or terminals due to the
incandescence of the conducting vapor
a. Erection c. Laid-on
b. Finishes d. Final phase
19. Materials used as final coating of a
surface or ornamental or protective
purposes.
a. Erection c. Laid-on
b. Finishes d. Final phase
20. The active principle of burning,
characterized by the heat and light of
combustion.
a. Boil c. Smoke
b. Ember d. Fire
20. The active principle of burning,
characterized by the heat and light of
combustion.
a. Boil c. Smoke
b. Ember d. Fire
21. A building unsafe in case of fire
because it will burn easily or because it
lacks adequate exits or fire escapes.
a. Public sewer
b. Private sewage disposal system
c. Leaching cesspool
d. Sump pit
39. A septic tank with effluent discharging into
a subsurface disposal field, seepage pits or of
such other facilities or may be permitted by the
plumbing code.
a. Public sewer
b. Private sewage disposal system
c. Leaching cesspool
d. Sump pit
40. The water collector at the eaves of the
building.
a. Digestion c. Disinfection
b. Sedimentation d. Filtration
48. That portion of sewage treatment process in
which biochemical decomposition of organic
matter takes place, resulting in the formation of
simple organic and mineral substances.
a. Digestion c. Disinfection
b. Sedimentation d. Filtration
49. Untreated sewage flowing into a treatment
system.
a. Influent c. Sludge
b. Effluent d. scum
49. Untreated sewage flowing into a treatment
system.
a. Influent c. Sludge
b. Effluent d. scum
50. Treated or partially treated sewage flowing
out of a treatment system.
a. Influent c. Sludge
b. Effluent d. scum
50. Treated or partially treated sewage flowing
out of a treatment system.
a. Influent c. Sludge
b. Effluent d. scum
51. Formation of layers in the influent.
a. Digestion c. Disinfection
b. Sedimentation d. Filtration
51. Formation of layers in the influent.
a. Digestion c. Disinfection
b. Sedimentation d. Filtration
52. Digestion of waste through the natural
bacteria digestive action in tank or chamber.
a. Digestion c. Disinfection
b. Sedimentation d. Filtration
54. A means of filtering out any solid matter
from the effluent.
a. Digestion c. Disinfection
b. Sedimentation d. Filtration
55. A process to disinfect the effluent with
chemicals.
a. Digestion c. Disinfection
b. Sedimentation d. Filtration
55. A process to disinfect the effluent with
chemicals.
a. Digestion c. Disinfection
b. Sedimentation d. Filtration
56. The flow or trickling of a liquid downward
through a filtering medium.
a. Filter c. Sedimentation
b. Percolation d. Trickling
56. The flow or trickling of a liquid downward
through a filtering medium.
a. Filter c. Sedimentation
b. Percolation d. Trickling
57. These are wells 60 centimeters or more in
diameter dug through the soft upper soil. The
sides maybe of masonry or concrete to prevent
from caving-in. It is necessary that the well
should be impervious to a depth of at least 3
meters.
a. Dug wells c. Driven wells
b. Bored wells d. Drilled wells
57. These are wells 60 centimeters or more in
diameter dug through the soft upper soil. The
sides maybe of masonry or concrete to prevent
from caving-in. It is necessary that the well
should be impervious to a depth of at least 3
meters.
a. Dug wells c. Driven wells
b. Bored wells d. Drilled wells
58. These are constructed either hand or
power-driven earth auger. A well casing is
lowered to the bottom of the hole. After the
boring is complete, cement grout is poured to
fill the gap between the bored hole and the well
casing. This is to prevent contamination.
a. Dug wells c. Driven wells
b. Bored wells d. Drilled wells
58. These are constructed either hand or
power-driven earth auger. A well casing is
lowered to the bottom of the hole. After the
boring is complete, cement grout is poured to
fill the gap between the bored hole and the well
casing. This is to prevent contamination.
a. Dug wells c. Driven wells
b. Bored wells d. Drilled wells
59. It is done by forcing into the earth a 60 t 90-
centimeter-long piece of perforated steel tube
attached to a pointed screen called a “drive
point”. This type of well varies from 32 mm
diameter to a depth of 3 to 12 meters.
a. Dug wells c. Driven wells
b. Bored wells d. Drilled wells
59. It is done by forcing into the earth a 60 t 90-
centimeter-long piece of perforated steel tube
attached to a pointed screen called a “drive
point”. This type of well varies from 32 mm
diameter to a depth of 3 to 12 meters.
a. Dug wells c. Driven wells
b. Bored wells d. Drilled wells
60. A drilling rig is used the hole and then a
casing or tubular pipe is forced down to the
hole to prevent it from caving-in. When a water-
bearing stratum of sufficient capacity is found,
a well screen is set in place to permit the water
to flow into the casing and to hold back the fine
material. The depth of this well is limited only
by the distance one must dig to obtain an
adequate supply of fresh water, even down to
450 meters.
a. Dug wells c. Driven wells
b. Bored wells d. Drilled wells
60. A drilling rig is used the hole and then a
casing or tubular pipe is forced down to the
hole to prevent it from caving-in. When a water-
bearing stratum of sufficient capacity is found,
a well screen is set in place to permit the water
to flow into the casing and to hold back the fine
material. The depth of this well is limited only
by the distance one must dig to obtain an
adequate supply of fresh water, even down to
450 meters.
a. Dug wells c. Driven wells
b. Bored wells d. Drilled wells
61. A short piece of pipe threaded on the
outside (male threads) at both ends, used to
join couplings or other fittings.
a. Nipple c. Bushing
b. Union d. Coupling
61. A short piece of pipe threaded on the
outside (male threads) at both ends, used to
join couplings or other fittings.
a. Nipple c. Bushing
b. Union d. Coupling
62. Below 75 mm in length. Also known as
shoulder nipple.
a. Tee c. Nipple
b. Elbow d. Union patente
66. A pipe fitting having a bend and makes an
angle (90 deg or 45 deg) between adjacent
pipes for a change in direction.
a. Tee c. Nipple
b. Elbow d. Union patente
67. Joins two pipes of different diameters at
right angle of each other. When specifying
reducer fittings, the bigger diameter is stated
first followed by the smaller diameter.
a. Bushing c. Gooseneck
b. Union d. Curb stop
77. A kind of GI fitting used as a reducer from a
bigger diameter to a lesser diameter.
a. Bushing c. Gooseneck
b. Union d. Curb stop
78. A GI fitting which is used when a pipe has
already been installed but dismantling is
difficult .
a. Bushing c. Gooseneck
b. Union d. Curb stop
78. A GI fitting which is used when a pipe has
already been installed but dismantling is
difficult.
a. Bushing c. Gooseneck
b. Union d. Curb stop
79. This occurs when a valve is suddenly turned
off and causes the water to stop, forcing the
pipes to shake and to reduce this, an additional
0.30m to 0.90m length of pipe is added to the
riser to give air pressure which absorbed it.
a. Housing c. Casing
b. Covering plate d. None of the above
84. A material used as covering, such as a pipe
bigger than the main pipe of a deep well so that
the main pipe can be pulled out of repair.
a. Housing c. Casing
b. Covering plate d. None of the above
85. This is the vertical distance from the higher
source of water or overhead tank to the outlet
(faucets, shower head) and is distributed by
gravity.
a. Circular c. Quartzoid
b. Ovoid d. Ellipsoid
91. Sprinkler heads are the ____ bulb type. The
bulb is transparent and contains a colored
liquid. At 360 degrees Fahrenheit, the bulb
breaks and releases water stream.
a. Circular c. Quartzoid
b. Ovoid d. Ellipsoid
92. One is called UPRIGHT when used above
piping when piping is exposed but when it is
hidden inside ceilings that shows only the bulb
it is called
a. Pendant c. Concealed
b. Pendent d. Sidewall
92. One is called UPRIGHT when used above
piping when piping is exposed but when it is
hidden inside ceilings that shows only the bulb
it is called
a. Pendant c. Concealed
b. Pendent d. Sidewall
doors, windows, vents, means of egress, etc. integral
to and incorporated into a building or structure in
order to minimize danger to life from fire, smoke,
fumes or panic before the building is evacuated.
These features are also designed to achieve, among
others, safe and rapid evacuation of people through
means of egress sealed from smoke or fire , the
confinement of fire or smoke in the room or floor of
origin and delay their spread to other parts of the
building by means of smoke sealed and fire-resistant
doors, walls and floors. It shall also mean to include
the treatment of buildings components or contents
with flame
a. Fireretardant
hydrants chemicals.
c. Fire safety construction
b. Fire exit construction d. None of the above
doors, windows, vents, means of egress, etc. integral
to and incorporated into a building or structure in
order to minimize danger to life from fire, smoke,
fumes or panic before the building is evacuated.
These features are also designed to achieve, among
others, safe and rapid evacuation of people through
means of egress sealed from smoke or fire , the
confinement of fire or smoke in the room or floor of
origin and delay their spread to other parts of the
building by means of smoke sealed and fire-resistant
doors, walls and floors. It shall also mean to include
the treatment of buildings components or contents
with flame
a. Fireretardant
hydrants chemicals.
c. Fire safety construction
b. Fire exit construction d. None of the above
94. Under the fire code, what is the maximum width
(meters) of a single door in a doorway?
a. 0.80 c. 1.40
b. 1.50 d. 1.22
94. Under the fire code, what is the maximum width
(meters) of a single door in a doorway?
a. 0.80 c. 1.40
b. 1.50 d. 1.22
95. The minimum temperature at which any material
gives off vapor in sufficient concentration to form an
ignitable mixture with air.
a. Forcing c. Heated
b. Stretching d. Tempered
96. A process where a piece of metal is heated prior
to changing its shape or dimensions.
a. Forcing c. Heated
b. Stretching d. Tempered
97. Kind of explosive compound which explodes by
percussion.
a. Fulminate c. compound
b. Percussive explosion d. Electric arc
97. Kind of explosive compound which explodes by
percussion.
a. Fulminate c. compound
b. Percussive explosion d. Electric arc
98. Any act of manufacturing, fabrication, conversion,
etc., that uses or produces materials which are likely
to cause fires or explosions.
a. Combustible operation/process
b. Hazardous operation/process
c. Chemical operation/process
d. None of the above
98. Any act of manufacturing, fabrication, conversion,
etc., that uses or produces materials which are likely
to cause fires or explosions.
a. Combustible operation/process
b. Hazardous operation/process
c. Chemical operation/process
d. None of the above
99. Passageway from one building to another or
through or around a wall in approximately the same
floor level.