Professional Documents
Culture Documents
Remote Power On
Remote Power On
By
V.Priyanka(488)
P.Vidyullatha(483)
Priyanka(486)
Contents:
Introduction
Purpose
Power Supply
Transmitter Unit
Control Unit
Description
Technology Used
Hardware Requirement
Software Requirement
Conclusion
Introduction:
The main aim of this project is to control the power
supply from control unit.
Whenever the current rating is under the threshold
range, the power supply will remain continue.
But if current rating exceeded we can cut the power
supply from control unit.
Purpose:
The Purpose of this project is to design a remote
power On/Off control and a current measurement
for electric outlets, based on Zigbee
communication.
Here we are going to monitor the current rating
continuously and depending on that rating we take
action from the control unit.
Power Supply:
Transmitter Unit:
Control unit:
Description:
• In this project we have two units, transmitter and
control units. In transmitter section we had current
measuring circuit, MCU, LCD, Load and zigbee
module.
• Here we are measuring current and sending this
rating to control unit by using Zigbee transceiver.
• On the control we are having MCU, Zigbee
transceiver, LCD and Key. We are receiving the
current rating from transmitter to control unit.
If current rating is under the limit then the power
supply will remain continued, otherwise we can cut
the power supply by pressing a control key from
control unit.
Like this we can avoid the over current condition at
our home/office
Technology Used:
• Now a day's every system is automated in order to
face new challenges.
• In the present days in the field of high preference