Professional Documents
Culture Documents
Construction of Bamboo Shed: Presentation For S.Y. Minor Project (Review 2)
Construction of Bamboo Shed: Presentation For S.Y. Minor Project (Review 2)
Construction of Bamboo Shed: Presentation For S.Y. Minor Project (Review 2)
Objectives to be achieved
1. To construct the shed of bamboo
2.To use the advanced techniques for bamboo joineries
3. improve aesthetic view
Lit Survey
Bamboo joints with steel clamps capable of transmitting moment
Richard Moran, José J. García
• 2)Each joint is comprised of five thin steel clamps tightened around the culms, which are
connected with small steel angles and platens in different configurations.
• 3)Average stiffness and strength of these connections were at least 29% and 25% higher than
those reported for conventional mortar-injected bolted connections.
• 4)This study shows that clamp moment connections are a feasible alternative to improve the
structural performance and versatility of bamboo structures.
Joints using steel clamps at the junction of beam and column
Connection type-
1) SC
2) TS
3) DW
Lit Survey
Urban Planning and Architecture Design for Sustainable Development, UPADSD 14- 16 October 2015
• 1)This paper result shows that bamboo can be a potential building material for organic shaped
buildings and become an alternative building material other than steel and concrete.
• 2)Also it showed that how an unusable curved shaped defective bamboo can be used for enhancing
aesthetic look.
• 3)Various examples of infrastructures across the world, constructed using bamboo are mentioned in
this research paper .
Lit Survey
Application of bamboo in a designebuild course: Lianhuadang Farm project
Jian Jiao*, Peng Tang
• 1)This project is a graduate Design-build course of the School of Architecture of Southeast University.
• 2)Students and craftsmen constructed six viewing facilities and renovated a toilet and a management building.
• 3)It explored ways of using bamboo and traditional craftsmanship by analyzing the main teaching procedures
and the key technical issues in the project.
• 4)Also study of contemporary methods to expand the construction in real environments is given.
• 5)Finally, the significance of bamboo construction for architectural design teaching was examined and
explained in the paper..
Lit Survey
Eco-friendly preservation of bamboo species
perminder jit kaur, Santosh satya, kamal k pant, satyayan naik
The RecentResearch on Bamboo Reinforce Concrete
Fig. The pegs along reinforcement Fig.The beam loaded in four point load
Methodology
Problem Literature
Pre testing design
identification survey
Preparation of
members
Fig.Stress-strain chart for moso bamboo Fig.Tensile test result for bamboo
2.Modulus of Elasticity Test
Green materials, buildings and life styles.
Fig. setup of compression test Fig. sample
4.Shear Test
• The ultimate load at failure is noted. Shear Stress is determined using formula given below from
ultimate load
• Shear stress = V = load/(2x area)
= P/(2A)
The higher strength values are obtained for center node samples. The average
shear strength of bamboo is taken as 29.12N/mm2.
5.Pullout Test
• The bond stress is determined from ultimate load using following formula.
Bond stress=zbd=
Fig.Pull-out test results for Coated and Uncoated Bamboo and Steel
Conclusion
• This project has covered the analysis and the conceptual design of a typical bamboo based shed structure
under various loads and their combinations. The design of the various components have been carried out in
accordance with the IS codes and the experimental results.
• Further, the manual analysis has been verified with analysis using STAAD Pro. Also, the experimental tests for
the friction capacity joints have been carried out for various bamboo samples. From the results, it has been
verified that the joints designed for the structure are safe and feasible.
• The roof is supported by bamboo pitched roof structure and the columns are designed as battened bamboo
members. The proposed structure can serve multiple purposes, such as workshop for a cottage industry,
warehouse, and other medium industries.
• It is more economically viable than the arched roof structure and thus, several times cheaper and eco
friendly.
Selected References
1) Richard Moran, José J. García, Construction and Building Materials:Bamboo joints with steel clamps
capable of transmitting moment 2019.
2) Esti Asih Nurdiah, Urban Planning and Architecture Design for Sustainable Development: The
Potential of Bamboo as Building Material in Organic Shaped Buildings 2015.
3) Jian Jiao*, Peng Tang, Application of bamboo in a design build 2019. course: Lianhuadang Farm
project
4) Perminder jit kaur, Santosh satya, kamal k pant, satyayan naik, Eco-friendly preservation of bamboo
species
Thank You!!
Any questions.