Seal plan 53A uses an external pressurized reservoir to provide barrier fluid for a dual seal arrangement, with reservoir pressure produced by gas and flow induced by a pumping ring, allowing optimization based on flow rate while particles settle and are not circulated for better seal life, especially where no leakage is tolerable or media is unsuitable as an inner seal lubricant, though some barrier fluid leakage into product occurs so compatibility must be ensured.
Seal plan 53A uses an external pressurized reservoir to provide barrier fluid for a dual seal arrangement, with reservoir pressure produced by gas and flow induced by a pumping ring, allowing optimization based on flow rate while particles settle and are not circulated for better seal life, especially where no leakage is tolerable or media is unsuitable as an inner seal lubricant, though some barrier fluid leakage into product occurs so compatibility must be ensured.
Seal plan 53A uses an external pressurized reservoir to provide barrier fluid for a dual seal arrangement, with reservoir pressure produced by gas and flow induced by a pumping ring, allowing optimization based on flow rate while particles settle and are not circulated for better seal life, especially where no leakage is tolerable or media is unsuitable as an inner seal lubricant, though some barrier fluid leakage into product occurs so compatibility must be ensured.
PRESSURIZED LIQUID BARRIER Seal plan 53A uses an external reservoir to provide barrier fluid for a pressurized dual seal arrangement Reservoir pressure is produced by a gas and flow is induced by a pumping ring Features • Reservoir can be optimized dependent on flow rate • Wear particles settle at bottom of reservoir and are not circulated • Gives better seal life Recommendations • Applications where no leakage to atmosphere can be tolerated • For dirty , abrasive or polymerizing products where media is unsuitable as a lubricant for inner seal. Caution • There will always be some leakage of barrier fluid into the product. Hence it should be ensured that barrier fluid is compatible with the product. • Ensure that the pressure source maintains higher pressure at the seal chamber so that process does not dilute the barrier fluid.